Energy Efficient Seismic Wave Propagation Simulation on a Low-power Manycore Processor.

International audienceLarge-scale simulation of seismic wave propagation is an active research topic. Its high demand for processing power makes it a good match for High Performance Computing (HPC). Although we have observed a steady increase on the processing capabilities of HPC platforms, their energy efficiency is still lacking behind. In this paper, we analyze the use of a low-power manycore processor, the MPPA-256, for seismic wave propagation simulations. First we look at its peculiar characteristics such as limited amount of on-chip memory and describe the intricate solution we brought forth to deal with this processor's idiosyncrasies. Next, we compare the performance and energy efficiency of seismic wave propagation on MPPA-256 to other commonplace platforms such as general-purpose processors and a GPU. Finally, we wrap up with the conclusion that, even if MPPA-256 presents an increased software development complexity, it can indeed be used as an energy efficient alternative to current HPC platforms, resulting in up to 71% and 5.18x less energy than a GPU and a general-purpose processor, respectively

McSimA+: A Manycore Simulator with Application-level+ Simulation and Detailed Microarchitecture Modeling

Abstract-With their significant performance and energy advantages, emerging manycore processors have also brought new challenges to the architecture research community. Manycore processors are highly integrated complex system-on-chips with complicated core and uncore subsystems. The core subsystems can consist of a large number of traditional and asymmetric cores. The uncore subsystems have also become unprecedentedly powerful and complex with deeper cache hierarchies, advanced on-chip interconnects, and high-performance memory controllers. In order to conduct research for emerging manycore processor systems, a microarchitecture-level and cycle-level manycore simulation infrastructure is needed. This paper introduces McSimA+, a new timing simulation infrastructure, to meet these needs. McSimA+ models x86-based asymmetric manycore microarchitectures in detail for both core and uncore subsystems, including a full spectrum of asymmetric cores from single-threaded to multithreaded and from in-order to out-of-order, sophisticated cache hierarchies, coherence hardware, on-chip interconnects, memory controllers, and main memory. McSimA+ is an application-level+ simulator, offering a middle ground between a full-system simulator and an application-level simulator. Therefore, it enjoys the light weight of an application-level simulator and the full control of threads and processes as in a full-system simulator. This paper also explores an asymmetric clustered manycore architecture that can reduce the thread migration cost to achieve a noticeable performance improvement compared to a state-of-the-art asymmetric manycore architecture

Introducing a Data Sliding Mechanism for Cooperative Caching in Manycore Architectures

International audienceIn this paper, we propose a new cooperative caching method improving the cache miss rate for manycore micro- architec- tures. The work is motivated by some limitations of recent adaptive cooperative caching proposals. Elastic Cooperative caching (ECC), is a dynamic memory partitioning mechanism that allows sharing cache across cooperative nodes according to the application behavior. However, it is mainly limited with cache eviction rate in case of highly stressed neighbor- hood. Another system, the adaptive Set-Granular Cooperative Caching (ASCC), is based on finer set-based mechanisms for a better adaptability. However, heavy localized cache loads are not efficiently managed. In such a context, we propose a cooperative caching strategy that consists in sliding data through closer neighbors. When a cache receives a storing request of a neighbor's private block, it spills the least recently used private data to a close neighbor. Thus, solicited saturated nodes slide local blocks to their respective neighbors to always provide free cache space. We also propose a new Priority- based Data Replacement policy to decide efficiently which blocks should be spilled, and a new mechanism to choose host destination called Best Neighbor selector. The first analytic performance evaluation shows that the proposed cache management policies reduce by half the average global communication rate. As frequent accesses are focused in the neighboring zones, it efficiently improves on-Chip traffic. Finally, our evaluation shows that cache miss rate is en- hanced: each tile keeps the most frequently accessed data 1- Hop close to it, instead of ejecting them Off-Chip. Proposed techniques notably reduce the cache miss rate in case of high solicitation of the cooperative zone, as it is shown in the performed experiments

Rapid SoC Design: On Architectures, Methodologies and Frameworks

Modern applications like machine learning, autonomous vehicles, and 5G networking require an order of magnitude boost in processing capability. For several decades, chip designers have relied on Moore’s Law - the doubling of transistor count every two years to deliver improved performance, higher energy efficiency, and an increase in transistor density. With the end of Dennard’s scaling and a slowdown in Moore’s Law, system architects have developed several techniques to deliver on the traditional performance and power improvements we have come to expect. More recently, chip designers have turned towards heterogeneous systems comprised of more specialized processing units to buttress the traditional processing units. These specialized units improve the overall performance, power, and area (PPA) metrics across a wide variety of workloads and applications. While the GPU serves as a classical example, accelerators for machine learning, approximate computing, graph processing, and database applications have become commonplace. This has led to an exponential growth in the variety (and count) of these compute units found in modern embedded and high-performance computing platforms. The various techniques adopted to combat the slowing of Moore’s Law directly translates to an increase in complexity for modern system-on-chips (SoCs). This increase in complexity in turn leads to an increase in design effort and validation time for hardware and the accompanying software stacks. This is further aggravated by fabrication challenges (photo-lithography, tooling, and yield) faced at advanced technology nodes (below 28nm). The inherent complexity in modern SoCs translates into increased costs and time-to-market delays. This holds true across the spectrum, from mobile/handheld processors to high-performance data-center appliances. This dissertation presents several techniques to address the challenges of rapidly birthing complex SoCs. The first part of this dissertation focuses on foundations and architectures that aid in rapid SoC design. It presents a variety of architectural techniques that were developed and leveraged to rapidly construct complex SoCs at advanced process nodes. The next part of the dissertation focuses on the gap between a completed design model (in RTL form) and its physical manifestation (a GDS file that will be sent to the foundry for fabrication). It presents methodologies and a workflow for rapidly walking a design through to completion at arbitrary technology nodes. It also presents progress on creating tools and a flow that is entirely dependent on open-source tools. The last part presents a framework that not only speeds up the integration of a hardware accelerator into an SoC ecosystem, but emphasizes software adoption and usability.PHDElectrical and Computer EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/168119/1/ajayi_1.pd