18 research outputs found
Recommended from our members
System and method for searching a data base using a content-searchable memory
" A dynamic storage device requires periodic refresh and includes logical operation circuitry within the refresh circuitry. The individual storage positions of the storage device are periodically read by a refresh amplifier, and then a logical operation is performed on the refresh data before the data re applied to the write amplifier. That operation allows implementation of associative database searching by cyclically executing ""data compare"" and other logical operations within the refresh circuitry. A system of content searching may be implemented in any storage device, dynamic or not, in which a comparand may be matched with any of a plurality of subunits of a word, and a storage bit is used to identify any words in which a mismatch occurs. Upon recognizing a match, the device can be commanded (a) to output the word or a selected portion (which may be different than the matched portion), (b) to move a selected portion of the word to a different location in the word, or (c) to alter the bits of the word or a selected portion. Arithmetical operations may be implemented through such alterations after matching. Off-chip storage systems of use with such devices are also disclosed. "Board of Regents, University of Texas Syste
On the nature and effect of power distribution noise in CMOS digital integrated circuits
The thesis reports on the development of a novel simulation method aimed at modelling power distribution noise generated in digital CMOS integrated circuits. The simulation method has resulted in new information concerning: 1. The magnitude and nature of the power distribution noise and its dependence on the performance and electrical characteristics of the packaged integrated circuit. Emphasis is laid on the effects of resistive, capacitative and inductive elements associated with the packaged circuit. 2. Power distribution noise associated with a generic systolic array circuit comprising 1,020,000 transistors, of which 510,000 are synchronously active. The circuit is configured as a linear array which, if fabricated using two-micron bulk CMOS technology, would be over eight centimetres long and three millimetres wide. In principle, the array will perform 1.5 x 10 to the power of 11 operations per second. 3. Power distribution noise associated with a non-array-based signal processor which, if fabricated in 2-micron bulk CMOS technology, would occupy 6.7 sq. cm. The circuit contains about 900,000 transistors, of which 600,000 are functional and about 300,000 are used for yield enhancement. The processor uses the RADIX-2 algorithm and is designed to achieve 2 x 10 to the power of 8 floating point operations per second. 4. The extent to which power distribution noise limits the level of integration and/ or performance of such circuits using standard and non-standard fabrication and packaging technology. 5. The extent to which the predicted power distribution noise levels affect circuit susceptibility to transient latch-up and electromigration. It concludes the nature of CMOS digital integrated circuit power distribution noise and recommends ways in which it may be minimised. It outlines an approach aimed at mechanising the developed simulation methodology so that the performance of power distribution networks may more routinely be assessed. Finally. it questions the long term suitability of mainly digital techniques for signal processing
The 1991 3rd NASA Symposium on VLSI Design
Papers from the symposium are presented from the following sessions: (1) featured presentations 1; (2) very large scale integration (VLSI) circuit design; (3) VLSI architecture 1; (4) featured presentations 2; (5) neural networks; (6) VLSI architectures 2; (7) featured presentations 3; (8) verification 1; (9) analog design; (10) verification 2; (11) design innovations 1; (12) asynchronous design; and (13) design innovations 2
Fault-Tolerant Computing: An Overview
Coordinated Science Laboratory was formerly known as Control Systems LaboratoryNASA / NAG-1-613Semiconductor Research Corporation / 90-DP-109Joint Services Electronics Program / N00014-90-J-127
The Fifth NASA Symposium on VLSI Design
The fifth annual NASA Symposium on VLSI Design had 13 sessions including Radiation Effects, Architectures, Mixed Signal, Design Techniques, Fault Testing, Synthesis, Signal Processing, and other Featured Presentations. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The presentations share insights into next generation advances that will serve as a basis for future VLSI design
State-of-the-art Assessment For Simulated Forces
Summary of the review of the state of the art in simulated forces conducted to support the research objectives of Research and Development for Intelligent Simulated Forces
The NASA computer science research program plan
A taxonomy of computer science is included, one state of the art of each of the major computer science categories is summarized. A functional breakdown of NASA programs under Aeronautics R and D, space R and T, and institutional support is also included. These areas were assessed against the computer science categories. Concurrent processing, highly reliable computing, and information management are identified
Literature Review For Networking And Communication Technology
Report documents the results of a literature search performed in the area of networking and communication technology