5,785 research outputs found

    A low-cost, high-performance, soft tri-axis tactile sensor based on eddy-current effect

    No full text
    Tactile sensors are essential for robotic systems to interact safely and effectively with the external world. In particular, tri-axis tactile sensors are crucial for dexterous robotic manipulations by providing shear force for slip and contact angle detection. In this paper, we present a soft tri-axis tactile sensors using flexible coils and conductive films based on eddy-current effect. Prototypes were developed, calibrated and evaluated, which achieved a force measurement resolution of 0.3 mN in each axis, with a bandwidth up to 1 kHz. The presented sensor is low-cost, robust, durable, and easily customizable for a variety of robotic and healthcare applications

    Tactile Sensors Based on Conductive Polymers

    Get PDF
    This paper presents results from a selection of tactile sensors that have been designed and fabricated. These sensors are based on a common approach that consists in placing a sheet of piezoresistive material on the top of a set of electrodes. We use a thin film of conductive polymer as the piezoresistive mate¬rial. Specifically, a conductive water-based ink of this polymer is deposited by spin coating on a flexible plastic sheet, giving it a smooth, homogeneous and conducting thin film. The main interest in this procedure is that it is cheap and it allows the fabrication of flexible and low cost tactile sensors. In this work we present results from sensors made using two technologies. Firstly, we have used a flexible Printed Circuit Board (PCB) technology to fabricate the set of electrodes and addressing tracks. The result is a simple, flexible tactile sensor. In addition to these sensors on PCB, we have proposed, designed and fabricated sensors with screen printing technology. In this case, the set of electrodes and addressing tracks are made by printing an ink based on silver nanoparticles. The intense characterization provides us insights into the design of these tactile sensors.This work has been partially funded by the spanish government under contract TEC2006-12376-C02

    Ultra-thin silicon based piezoelectric capacitive tactile sensor

    Get PDF
    This paper presents an ultra-thin bendable silicon based tactile sensor, in a piezoelectric capacitor configuration, realized by wet anisotropic etching as post-processing steps. The device is fabricated over bulk silicon, which is thinned down to 35 μm from an original thickness of 636 μm. Dicing of thin membrane is achieved by low cost novel technique of Dicing before Etching. The piezoelectric capacitor is composed of polyvinylidene fluoride trifluoroethylene (PVDF-TrFE), which present an attractive avenue for tactile sensing as they respond to dynamic contact events (which is critical for robotic tasks), easy to fabricate at low cost and are inherently flexible. The sensor exhibits enhanced piezoelectric properties, thanks to the optimization of the poling procedure. The sensor capacitive behaviour is confirmed using impedance analysis and the electro-mechanical characterization is done using TIRA shaker setup

    Tactile sensing chips with POSFET array and integrated interface electronics

    Get PDF
    This work presents the advanced version of novel POSFET (Piezoelectric Oxide Semiconductor Field Effect Transistor) devices based tactile sensing chip. The new version of the tactile sensing chip presented here comprises of a 4 x 4 array of POSFET touch sensing devices and integrated interface electronics (i.e. multiplexers, high compliance current sinks and voltage output buffers). The chip also includes four temperature diodes for the measurement of contact temperature. Various components on the chip have been characterized systematically and the overall operation of the tactile sensing system has been evaluated. With new design the POSFET devices have improved performance (i.e. linear response in the dynamic contact forces range of 0.01–3N and sensitivity (without amplification) of 102.4 mV/N), which is more than twice the performance of their previous implementations. The integrated interface electronics result in reduced interconnections which otherwise would be needed to connect the POSFET array with off-chip interface electronic circuitry. This research paves the way for CMOS (Complementary Metal Oxide Semiconductor) implementation of full on-chip tactile sensing systems based on POSFETs

    Development of an intelligent object for grasp and manipulation research

    Get PDF
    Kõiva R, Haschke R, Ritter H. Development of an intelligent object for grasp and manipulation research. Presented at the ICAR 2011, Tallinn, Estonia.In this paper we introduce a novel device, called iObject, which is equipped with tactile and motion tracking sensors that allow for the evaluation of human and robot grasping and manipulation actions. Contact location and contact force, object acceleration in space (6D) and orientation relative to the earth (3D magnetometer) are measured and transmitted wirelessly over a Bluetooth connection. By allowing human-human, human-robot and robot-robot comparisons to be made, iObject is a versatile tool for studying manual interaction. To demonstrate the efficiency and flexibility of iObject for the study of bimanual interactions, we report on a physiological experiment and evaluate the main parameters of the considered dual-handed manipulation task

    Temperature compensated tactile sensing using MOSFET with P(VDF-TrFE)/BaTiO3 capacitor as extended gate

    Get PDF
    This work presents Poly(vinylidene fluoride – trifluoroethylene))/Barium Titanate (P(VDF-TrFE)-BT) nanocomposite based touch sensors tightly coupled with MOSFET devices in extended gate configuration. The P(VDF-TrFE)-BT nanocomposite exploits the distinct piezo and pyroelectric properties of P(VDF-TrFE) polymer matrix and BT fillers to suppress the temperature response when force and temperature are varied simultaneously. The reasons for this unique feature have been established through structural and electrical characterization of nanocomposite. The proposed touch sensor was tested over a wide range of force/pressure (0-4N)/(0-364 Pa) and temperature (26-70°C) with almost linear response. The sensitivity towards force/pressure and temperature sensor are 670 mV/N/7.36 mV/Pa and 15.34 mV/°C respectively. With this modified touch sensing capability, the proposed sensors will open new direction for tactile sensing in robotic applications

    Ground Robotic Hand Applications for the Space Program study (GRASP)

    Get PDF
    This document reports on a NASA-STDP effort to address research interests of the NASA Kennedy Space Center (KSC) through a study entitled, Ground Robotic-Hand Applications for the Space Program (GRASP). The primary objective of the GRASP study was to identify beneficial applications of specialized end-effectors and robotic hand devices for automating any ground operations which are performed at the Kennedy Space Center. Thus, operations for expendable vehicles, the Space Shuttle and its components, and all payloads were included in the study. Typical benefits of automating operations, or augmenting human operators performing physical tasks, include: reduced costs; enhanced safety and reliability; and reduced processing turnaround time

    Integrated circuit interface for artificial skins

    Get PDF
    Artificial sensitive skins are intended to emulate the human skin to improve the skills of robots and machinery in complex unstructured environments. They are basically smart arrays of pressure sensors. As in the case of artificial retinas, one problem to solve is the management of the huge amount of information that such arrays provide, especially if this information should be used by a central processing unit to implement some control algorithms. An approach to manage such information is to increment the signal processing performed close to the sensor in order to extract the useful information and reduce the errors caused by long wires. This paper proposes the use of voltage to frequency converters to implement a quite straightforward analog to digital conversion as front end interface to digital circuitry in a smart tactile sensor. The circuitry commonly implemented to read out the information from a piezoresistive tactile sensor can be modified to turn it into an array of voltage to frequency converters. This is carried out in this paper, where the feasibility of the idea is shown through simulations and its performance is discussed.Gobierno de España TEC2006-12376-C02-01, TEC2006-1572

    Computer hardware and software for robotic control

    Get PDF
    The KSC has implemented an integrated system that coordinates state-of-the-art robotic subsystems. It is a sensor based real-time robotic control system performing operations beyond the capability of an off-the-shelf robot. The integrated system provides real-time closed loop adaptive path control of position and orientation of all six axes of a large robot; enables the implementation of a highly configurable, expandable testbed for sensor system development; and makes several smart distributed control subsystems (robot arm controller, process controller, graphics display, and vision tracking) appear as intelligent peripherals to a supervisory computer coordinating the overall systems
    corecore