Illumination sensing in LED lighting systems based on frequency-division multiplexing

Recently, light emitting diode (LED) based illumination systems have attracted considerable research interest. Such systems normally consist of a large number of LEDs. In order to facilitate the control of such high-complexity system, a novel signal processing application, namely illumination sensing, is thus studied. In this paper, the system concept and research challenges of illumination sensing are presented. Thereafter, we investigate a frequency-division multiplexing (FDM) scheme to distinguish the signals from different LEDs, such that we are able to estimate the illuminances of all the LEDs simultaneously. Moreover, a filter bank sensor structure is proposed to study the key properties of the FDM scheme. Conditions on the design of the filter response are imposed for the ideal case without the existence of any frequency inaccuracy, as well as for the case with frequency inaccuracies. The maximum number of LEDs that can be supported for each case is also derived. In particular, it is shown that, among all the other considered functions, the use of the triangular function is able to give a better tradeoff between the number of LEDs that can be supported and the allowable clock inaccuracies within a practical range. Moreover, through numerical investigations, we show that many tens of LEDs can be supported for the considered system parameters. Remark on the low-cost implementations of the proposed sensor structure is also provided

A two phase framework for visible light-based positioning in an indoor environment: performance, latency, and illumination

Recently with the advancement of solid state lighting and the application thereof to Visible Light Communications (VLC), the concept of Visible Light Positioning (VLP) has been targeted as a very attractive indoor positioning system (IPS) due to its ubiquity, directionality, spatial reuse, and relatively high modulation bandwidth. IPSs, in general, have 4 major components (1) a modulation, (2) a multiple access scheme, (3) a channel measurement, and (4) a positioning algorithm. A number of VLP approaches have been proposed in the literature and primarily focus on a fixed combination of these elements and moreover evaluate the quality of the contribution often by accuracy or precision alone. In this dissertation, we provide a novel two-phase indoor positioning algorithmic framework that is able to increase robustness when subject to insufficient anchor luminaries and also incorporate any combination of the four major IPS components. The first phase provides robust and timely albeit less accurate positioning proximity estimates without requiring more than a single luminary anchor using time division access to On Off Keying (OOK) modulated signals while the second phase provides a more accurate, conventional, positioning estimate approach using a novel geometric constrained triangulation algorithm based on angle of arrival (AoA) measurements. However, this approach is still an application of a specific combination of IPS components. To achieve a broader impact, the framework is employed on a collection of IPS component combinations ranging from (1) pulsed modulations to multicarrier modulations, (2) time, frequency, and code division multiple access, (3) received signal strength (RSS), time of flight (ToF), and AoA, as well as (4) trilateration and triangulation positioning algorithms. Results illustrate full room positioning coverage ranging with median accuracies ranging from 3.09 cm to 12.07 cm at 50% duty cycle illumination levels. The framework further allows for duty cycle variation to include dimming modulations and results range from 3.62 cm to 13.15 cm at 20% duty cycle while 2.06 cm to 8.44 cm at a 78% duty cycle. Testbed results reinforce this frameworks applicability. Lastly, a novel latency constrained optimization algorithm can be overlaid on the two phase framework to decide when to simply use the coarse estimate or when to expend more computational resources on a potentially more accurate fine estimate. The creation of the two phase framework enables robust, illumination, latency sensitive positioning with the ability to be applied within a vast array of system deployment constraints

Software-Defined Lighting.

For much of the past century, indoor lighting has been based on incandescent or gas-discharge technology. But, with LED lighting experiencing a 20x/decade increase in flux density, 10x/decade decrease in cost, and linear improvements in luminous efficiency, solid-state lighting is finally cost-competitive with the status quo. As a result, LED lighting is projected to reach over 70% market penetration by 2030. This dissertation claims that solid-state lighting’s real potential has been barely explored, that now is the time to explore it, and that new lighting platforms and applications can drive lighting far beyond its roots as an illumination technology. Scaling laws make solid-state lighting competitive with conventional lighting, but two key features make solid-state lighting an enabler for many new applications: the high switching speeds possible using LEDs and the color palettes realizable with Red-Green-Blue-White (RGBW) multi-chip assemblies. For this dissertation, we have explored the post-illumination potential of LED lighting in applications as diverse as visible light communications, indoor positioning, smart dust time synchronization, and embedded device configuration, with an eventual eye toward supporting all of them using a shared lighting infrastructure under a unified system architecture that provides software-control over lighting. To explore the space of software-defined lighting (SDL), we design a compact, flexible, and networked SDL platform to allow researchers to rapidly test new ideas. Using this platform, we demonstrate the viability of several applications, including multi-luminaire synchronized communication to a photodiode receiver, communication to mobile phone cameras, and indoor positioning using unmodified mobile phones. We show that all these applications and many other potential applications can be simultaneously supported by a single lighting infrastructure under software control.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/111482/1/samkuo_1.pd

INTEGRATED CHIRPED-GRATING SPECTROMETER-ON-A-CHIP

In this dissertation we demonstrate a new structure based on waveguide coupling atop a silicon wafer using a chirped grating to provide the dispersion that leads to a high-resolution, compact, fully integrable and CMOS-compatible spectrometer. Light is both analyzed and detected in a single, completely monolithic component which enables realizing a high-resolution portable spectrometer with an extremely compact footprint. The structure is comprised of a SiO2/Si3N4/SiO2 waveguide on top of a silicon wafer. Grating regions are fabricated on the top cladding of the waveguide. The input light is incident on a chirped grating area known as the collection area. Because of the local variation of the grating pitch across the collection area, different wavelengths of light are coupled into the waveguide at different lateral positions across the collection area. Guided light is then outcoupled through second grating region known as the detection area to the array of photodiodes placed either atop the second grating region or below the second grating region in silicon chip. Therefore, spectral information is encoded in the chirped grating coupler, which is fabricated in a single lithography step, independent of the number of channels. For these initial experiments, a separate detection array was used. In future iterations, these detectors can be integrated into the underlying silicon, resulting in a fully integrated spectrometer on a chip. Varying the input angle of the light will vary the measurement spectral range. This will result in an inexpensive spectrometer on chip, with adjustable resolution and spectral coverage controlled by the grating chirp and the input angle

Doubly Orthogonal Wavelet Packets for Multi-Users Indoor Visible Light Communication Systems

Visible Light Communication (VLC) is a data communication technology that modulates the intensity of the light to transmit the information mostly by means of Light Emitting Diodes (LEDs). The data rate is mainly throttled by the limited bandwidth of the LEDs. To combat, Multi-carrier Code Division Multiple Access (MC-CDMA) is a favorable technique for achieving higher data rates along with reduced Inter-Symbol Interference (ISI) and easy access to multi-users at the cost of slightly reduced compromised spectral efficiency and Multiple Access Interference (MAI). In this article, a multi-user VLC system is designed using a Discrete Wavelet Transform (DWT) that eradicates the use of cyclic prefix due to the good orthogonality and time-frequency localization properties of wavelets. Moreover, the design also comprises suitable signature codes, which are generated by employing double orthogonality depending upon Walsh codes and Wavelet Packets. The proposed multi-user system is simulated in MATLAB software and its overall performance is assessed using line-of-sight (LoS) and non-line-of-sight (NLoS) configurations. Furthermore, two sub-optimum multi-users detection schemes such as zero forcing (ZF) and minimum-mean-square-error (MMSE) are also used at the receiver. The simulated results illustrate that the doubly orthogonal signature waveform-based DWT-MC-CDMA with MMSE detection scheme outperforms the Walsh code-based multi-user system

Real-time 3-D Reconstruction by Means of Structured Light Illumination

Structured light illumination (SLI) is the process of projecting a series of light striped patterns such that, when viewed at an angle, a digital camera can reconstruct a 3-D model of a target object\u27s surface. But by relying on a series of time multiplexed patterns, SLI is not typically associated with video applications. For this purpose of acquiring 3-D video, a common SLI technique is to drive the projector/camera pair at very high frame rates such that any object\u27s motion is small over the pattern set. But at these high frame rates, the speed at which the incoming video can be processed becomes an issue. So much so that many video-based SLI systems record camera frames to memory and then apply off-line processing. In order to overcome this processing bottleneck and produce 3-D point clouds in real-time, we present a lookup-table (LUT) based solution that in our experiments, using a 640 by 480 video stream, can generate intermediate phase data at 1063.8 frames per second and full 3-D coordinate point clouds at 228.3 frames per second. These achievements are 25 and 10 times faster than previously reported studies. At the same time, a novel dual-frequency pattern is developed which combines a high-frequency sinusoid component with a unit-frequency sinusoid component, where the high-frequency component is used to generate robust phase information and the unit-frequency component is used to reduce phase unwrapping ambiguities. Finally, we developed a gamma model for SLI, which can correct the non-linear distortion caused by the optical devices. For three-step phase measuring profilometry (PMP), analysis of the root mean squared error of the corrected phase showed a 60х reduction in phase error when the gamma calibration is performed versus 33х reduction without calibration

Design of communication systems based on broadband sources for fiber and free space optical links

[ES] Las comunicaciones ópticas inalámbricas (OWC) constituyen una tecnología muy prometedora para el desarrollo de futuras comunicaciones inalámbricas. De hecho, ha despertado un interés creciente entre los investigadores y varias empresas de todo el mundo trabajan actualmente en el desarrollo de redes inalámbricas de muy alta velocidad. Las comunidades científica e industrial consideran la OWC como una tecnología complementaria en sus diversas formas: comunicaciones ópticas en el espacio libre (FSO), comunicaciones de luz visible (VLC) o fidelidad de la luz (Li-Fi). El espectro óptico ha sido considerado durante muchos años como una gran oportunidad para las comunicaciones inalámbricas, especialmente debido a la saturación del espectro de radiofrecuencia (RF). Esta disertación trata del uso de fuentes de banda ancha en sistemas de transmisión de luz visible (VLC), así como en sistemas de transmisión en el espectro infrarrojo por fibra óptica. En el trabajo de investigación realizado se pueden distinguir tres partes: En la primera parte, se considera el estudio y la simulación de componentes de Diodos Emisores de Luz (LED) con el software WIEN2k centrándose en las propiedades ópticas y eléctricas de los elementos II-VI. La segunda parte trata del diseño, la implementación y las pruebas de diferentes prototipos de comunicación VLC para la transmisión analógica y digital en modo simplex y semidúplex. Hemos demostrado un sistema OWC empleando una fuente de banda ancha (LED) para la transmisión no sólo de datos, sino también para la transmisión inalámbrica de energía. Además, se aborda el problema de la sincronización y la detección del nivel "1" o "0" de un bit en los sistemas de comunicación inalámbrica óptica implementados que surge como consecuencia de la atenuación de la luz a lo largo de la distancia y al problema de la pérdida de línea de visión (NLOS) entre el emisor y el receptor. Para hacer frente a este problema, se ha proporcionado un protocolo de comunicación que garantiza la transmisión fiable de datos digitales con un algoritmo de detección de nivel de bits adaptativo y se ha demostrado su eficacia mediante la transmisión de textos e imágenes. Además, esta tesis aporta una solución para la implementación de transmisores multiplexados en redes con división de longitud de onda (WDM) para formatos de modulación con multiplexación por división de frecuencia ortogonal (OFDM) basados en el uso de fuentes de banda ancha en el espectro infrarrojo para redes de fibra bidireccionales centralizadas. A pesar de las limitaciones impuestas por la dispersión cromática en el uso de este tipo de fuentes ópticas, la inclusión de ciertas estructuras antes de la detección permite la transmisión de señales OFDM en enlaces ópticos. En este trabajo se ha demostrado experimentalmente la reutilización de portadoras, la asignación dinámica de ancho de banda y la transmisión de señales OFDM multibanda mediante el uso de fuentes ópticas de banda ancha en redes WDM. Los principales resultados obtenidos en cada parte de esta tesis doctoral muestran los procedimientos de estudio, la eficacia de las soluciones propuestas y las limitaciones encontradas.[CA] Les comunicacions òptiques sense fils (OWC) constitueixen una tecnologia molt prometedora per al desenvolupament de futures comunicacions sense fils. De fet, ha despertat un interés creixent entre els investigadors i diverses empreses de tot el món treballen actualment en el desenvolupament de xarxes sense fils de molt alta velocitat. Les comunitats científica i industrial consideren la OWC com una tecnologia complementària en les seues diverses formes: comunicacions òptiques en l'espai lliure (FSO), comunicacions de llum visible (VLC) o fidelitat de la llum (Li-Fi). L'espectre òptic ha sigut considerat durant molts anys com una gran oportunitat per a les comunicacions sense fils, especialment a causa de la saturació de l'espectre de radiofreqüència (RF). Aquesta dissertació tracta de l'ús de fonts de banda ampla en sistemes de transmissió de llum visible (VLC), així com en sistemes de transmissió en l'espectre infraroig per fibra òptica. En el treball de recerca realitzat es poden distingir tres parts: ¿ En la primera part, es considera l'estudi i la simulació de components de Díodes Emissors de Llum (LED) amb el software WIEN2k centrant-se en les propietats òptiques i elèctriques dels elements II-VI. ¿ La segona part tracta del disseny, la implementació i les proves de diferents prototips de comunicació VLC per a la transmissió analògica i digital de manera simplex i semidúplex. Hem demostrat un sistema OWC emprant una font de banda ampla (LED) per a la transmissió no sols de dades, sinó també per a la transmissió sense fil d'energia. A més, s'aborda el problema de la sincronització i la detecció del nivell "1" o "0" d'un bit en els sistemes de comunicació sense fil òptica implementats, que sorgeix a conseqüència de l'atenuació de la llum al llarg de la distància i al problema de la pèrdua de línia de visió (NLOS) entre l'emissor i el receptor. Per a fer front a aquest problema, s'ha proporcionat un protocol de comunicació que garanteix la transmissió fiable de dades digitals amb un algorisme de detecció de nivell de bits adaptatiu i s'ha demostrat la seua eficàcia mitjançant la transmissió de textos i imatges. ¿ A més, aquesta tesi aporta una solució per a la implementació de transmissors multiplexats en xarxes amb divisió de longitud d'ona (WDM) per a formats de modulació amb multiplexació per divisió de freqüència ortogonal (OFDM) basats en l'ús de fonts de banda ampla en l'espectre infraroig per a xarxes de fibra bidireccionals centralitzades. Malgrat les limitacions imposades per la dispersió cromàtica en l'ús d'aquest tipus de fonts òptiques, la inclusió d'unes certes estructures abans de la detecció permet la transmissió de senyals OFDM en enllaços òptics. En aquest treball s'ha demostrat experimentalment la reutilització de portadores, l'assignació dinàmica d'amplada de banda i la transmissió de senyals OFDM multibanda mitjançant l'ús de fonts òptiques de banda ampla en xarxes WDM. Els principals resultats obtinguts en cada part d'aquesta tesi doctoral mostren els procediments d'estudi, l'eficàcia de les solucions proposades i les limitacions trobades.[EN] Optical wireless communication (OWC) is a very promising technology for future wireless communications developments. It has attracted increasing interest from researchers and several companies around the world are currently working on the development of very high-speed wireless networks. The scientific and industrial communities believe that OWC will be a complementary technology in its various forms: Free Space Optical communications (FSO), Visible Light Communications (VLC), Light Fidelity (Li-Fi). In fact, the optical spectrum has been considered for many years as a great opportunity for wireless communications especially due to the saturation of the radio frequency (RF) spectrum. This dissertation deals with the use of broadband sources in visible light transmission systems (VLC) as well as fiber optic systems. To carry out the research, three parts can be distinguished: In the first part, we consider the study and simulation of Light Emitting Diode (LED) components with the WIEN2k software by focusing on the optical and electrical properties of elements II-VI. The second part deals with the design, implementation and testing of different VLC communication prototypes for analog and digital transmission in simplex and half-duplex mode. We have demonstrated that an OWC system using a broadband source (i.e. an LED) can be used not only for data transmission, but also for wireless power transmission. Moreover, the synchronization problem and the detection of level "1" or "0" of a bit often arise in the optical wireless communication systems. This is a result of the attenuation nature of the light over the distance and the problem of Non Line-Of-Sight (NLOS) between the emitter and the receiver. To deal with this problem, a communication protocol ensuring reliable digital data transmission with an adaptive bit level detection algorithm has been provided and its effectiveness has been demonstrated by the transmission of texts and images. In addition, this thesis provides a solution for the implementation of wavelength division multiplexed - orthogonal frequency division multiplexed (WDM-OFDM) transmitters based on the use of broadband sources in the infrared spectrum for centralized bidirectional fiber networks. Despite the chromatic dispersion that avoids the use of this type of optical sources, the inclusion of certain structures before detection allows the transmission of OFDM signals in optical links. Carrier reuse, dynamic bandwidth allocation and multiband OFDM signals transmission will be experimentally demonstrated by using optical broadband sources in WDM networks. The main results obtained during this thesis work demonstrate the study procedures, for each part, the effectiveness of the proposed solutions as well as the constraints encountered.Sekkiou, I. (2021). Design of communication systems based on broadband sources for fiber and free space optical links [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/172542TESI