Novel Methods for Weak Physiological Parameters Monitoring.

M.S. Thesis. University of Hawaiʻi at Mānoa 2017

Experimental Demonstration of Accurate Noncontact Measurement of Arterial Pulse Wave Displacements Using 79-GHz Array Radar

In this study, we present a quantitative evaluation of the accuracy of simultaneous array-radar-based measurements of the displacements caused at two parts of the human body by arterial pulse wave propagation. To establish the feasibility of accurate radar-based noncontact measurement of this pulse wave propagation, we perform experiments with four participants using a 79-GHz millimeter-wave ultra-wideband multiple-input multiple-output array radar system and a pair of laser displacement sensors. We evaluate the accuracy of the pulse wave propagation measurements by comparing the displacement waveforms that are measured using the radar system with the corresponding waveforms that are measured using the laser sensors. In addition, to evaluate the estimates of the pulse wave propagation channels, we compare the impulse response functions that are calculated from the displacement waveforms obtained from both the radar data and the laser data. The displacement waveforms and the impulse responses both demonstrated the good agreement between the results of the radar and laser measurements. The normalized correlation coefficient between the impulse responses obtained from the radar and laser data on average was as high as 0.97 for the four participants. The results presented here strongly support the feasibility of accurate radar-based noncontact measurement of arterial pulse wave propagation

Characterization and processing of novel neck photoplethysmography signals for cardiorespiratory monitoring

Epilepsy is a neurological disorder causing serious brain seizures that severely affect the patients' quality of life. Sudden unexpected death in epilepsy (SUDEP), for which no evident decease reason is found after post-mortem examination, is a common cause of mortality. The mechanisms leading to SUDEP are uncertain, but, centrally mediated apneic respiratory dysfunction, inducing dangerous hypoxemia, plays a key role. Continuous physiological monitoring appears as the only reliable solution for SUDEP prevention. However, current seizure-detection systems do not show enough sensitivity and present a high number of intolerable false alarms. A wearable system capable of measuring several physiological signals from the same body location, could efficiently overcome these limitations. In this framework, a neck wearable apnea detection device (WADD), sensing airflow through tracheal sounds, was designed. Despite the promising performance, it is still necessary to integrate an oximeter sensor into the system, to measure oxygen saturation in blood (SpO2) from neck photoplethysmography (PPG) signals, and hence, support the apnea detection decision. The neck is a novel PPG measurement site that has not yet been thoroughly explored, due to numerous challenges. This research work aims to characterize neck PPG signals, in order to fully exploit this alternative pulse oximetry location, for precise cardiorespiratory biomarkers monitoring. In this thesis, neck PPG signals were recorded, for the first time in literature, in a series of experiments under different artifacts and respiratory conditions. Morphological and spectral characteristics were analyzed in order to identify potential singularities of the signals. The most common neck PPG artifacts critically corrupting the signal quality, and other breathing states of interest, were thoroughly characterized in terms of the most discriminative features. An algorithm was further developed to differentiate artifacts from clean PPG signals. Both, the proposed characterization and classification model can be useful tools for researchers to denoise neck PPG signals and exploit them in a variety of clinical contexts. In addition to that, it was demonstrated that the neck also offered the possibility, unlike other body parts, to extract the Jugular Venous Pulse (JVP) non-invasively. Overall, the thesis showed how the neck could be an optimum location for multi-modal monitoring in the context of diseases affecting respiration, since it not only allows the sensing of airflow related signals, but also, the breathing frequency component of the PPG appeared more prominent than in the standard finger location. In this context, this property enabled the extraction of relevant features to develop a promising algorithm for apnea detection in near-real time. These findings could be of great importance for SUDEP prevention, facilitating the investigation of the mechanisms and risk factors associated to it, and ultimately reduce epilepsy mortality.Open Acces

Wildcat wellness coaching feasibility trial: protocol for home-based health behavior mentoring in girls

Citation: Cull, B. J., Rosenkranz, S. K., Dzewaltowski, D. A., Teeman, C. S., Knutson, C. K., & Rosenkranz, R. R. (2016). Wildcat wellness coaching feasibility trial: protocol for home-based health behavior mentoring in girls. Pilot and Feasibility Studies, 2(1), 26. https://doi.org/10.1186/s40814-016-0066-yChildhood obesity is a major public health problem, with one third of America’s children classified as either overweight or obese. Obesity prevention and health promotion programs using components such as wellness coaching and home-based interventions have shown promise, but there is a lack of published research evaluating the impact of a combined home-based and wellness coaching intervention for obesity prevention and health promotion in young girls. The main objective of this study is to test the feasibility of such an intervention on metrics related to recruitment, intervention delivery, and health-related outcome assessments. The secondary outcome is to evaluate the possibility of change in health-related psychosocial, behavioral, and biomedical outcomes in our sample of participants

In vivo morphometric and mechanical characterization of trabecular bone from high resolution magnetic resonance imaging

La osteoporosis es una enfermedad ósea que se manifiesta con una menor densidad ósea y el deterioro de la arquitectura del hueso esponjoso. Ambos factores aumentan la fragilidad ósea y el riesgo de sufrir fracturas óseas, especialmente en mujeres, donde existe una alta prevalencia. El diagnóstico actual de la osteoporosis se basa en la cuantificación de la densidad mineral ósea (DMO) mediante la técnica de absorciometría dual de rayos X (DXA). Sin embargo, la DMO no puede considerarse de manera aislada para la evaluación del riesgo de fractura o los efectos terapéuticos. Existen otros factores, tales como la disposición microestructural de las trabéculas y sus características que es necesario tener en cuenta para determinar la calidad del hueso y evaluar de manera más directa el riesgo de fractura. Los avances técnicos de las modalidades de imagen médica, como la tomografía computarizada multidetector (MDCT), la tomografía computarizada periférica cuantitativa (HR-pQCT) y la resonancia magnética (RM) han permitido la adquisición in vivo con resoluciones espaciales elevadas. La estructura del hueso trabecular puede observarse con un buen detalle empleando estas técnicas. En particular, el uso de los equipos de RM de 3 Teslas (T) ha permitido la adquisición con resoluciones espaciales muy altas. Además, el buen contraste entre hueso y médula que proporcionan las imágenes de RM, así como la utilización de radiaciones no ionizantes sitúan a la RM como una técnica muy adecuada para la caracterización in vivo de hueso trabecular en la enfermedad de la osteoporosis. En la presente tesis se proponen nuevos desarrollos metodológicos para la caracterización morfométrica y mecánica del hueso trabecular en tres dimensiones (3D) y se aplican a adquisiciones de RM de 3T con alta resolución espacial. El análisis morfométrico está compuesto por diferentes algoritmos diseñados para cuantificar la morfología, la complejidad, la topología y los parámetros de anisotropía del tejido trabecular. En cuanto a la caracterización mecánica, se desarrollaron nuevos métodos que permiten la simulación automatizada de la estructura del hueso trabecular en condiciones de compresión y el cálculo del módulo de elasticidad. La metodología desarrollada se ha aplicado a una población de sujetos sanos con el fin de obtener los valores de normalidad del hueso esponjoso. Los algoritmos se han aplicado también a una población de pacientes con osteoporosis con el fin de cuantificar las variaciones de los parámetros en la enfermedad y evaluar las diferencias con los resultados obtenidos en un grupo de sujetos sanos con edad similar.Los desarrollos metodológicos propuestos y las aplicaciones clínicas proporcionan resultados satisfactorios, presentando los parámetros una alta sensibilidad a variaciones de la estructura trabecular principalmente influenciadas por el sexo y el estado de enfermedad. Por otra parte, los métodos presentan elevada reproducibilidad y precisión en la cuantificación de los valores morfométricos y mecánicos. Estos resultados refuerzan el uso de los parámetros presentados como posibles biomarcadores de imagen en la enfermedad de la osteoporosis.Alberich Bayarri, Á. (2010). In vivo morphometric and mechanical characterization of trabecular bone from high resolution magnetic resonance imaging [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/8981Palanci

The re-education of upper limb movement post stroke using iterative learning control mediated by electrical stimulation

An inability to perform tasks involving reaching is a common problem following stroke. Evidence supports the use of robotic therapy and electrical stimulation (ES) to reduce upper limb impairments following stroke, but current systems may not encourage maximal voluntary contribution from the participant. This study developed and tested iterative learning control (ILC) algorithms mediated by ES, using a purpose designed robotic workstation, for upper limb rehabilitation post stroke. Surface electromyography (EMG) which may be related to impaired performance and function was used to investigate seven shoulder and elbow muscle activation patterns in eight neurologically intact and five chronic stroke participants during nine tracking tasks. The participants’ forearm was supported using a hinged arm-holder, which constrained their hand to move in a two dimensional horizontal plane.Outcome measures taken prior to and after an intervention consisted of the Fugl-Meyer Assessment (FMA) and the Action Research Arm Test (ARAT), isometric force and error tracking. The intervention for stroke participants consisted of eighteen sessions in which a similar range of tracking tasks were performed with the addition of responsive electrical stimulation to their triceps muscle. A question set was developed to understand participants’ perceptions of the ILC system. Statistically significant improvements were measured (p?0.05) in: FMA motor score, unassisted tracking, and in isometric force. Statistically significant differences in muscle activation patterns were observed between stroke and neurologically intact participants for timing, amplitude and coactivation patterns. After the intervention significant changes were observed in many of these towards neurologically intact ranges. The robot–assisted therapy was well accepted and tolerated by the stroke participants. This study has demonstrated the feasibility of using ILC mediated by ES for upper limb stroke rehabilitation in the treatment of stroke patients with upper limb hemiplegia

Analysis of body calcium (regional changes in body calcium by in vivo neutron activation analysis)

The effect of space flight on urine and fecal calcium loss was documented during the three long-term Skylab flights. Neutron activation analysis was used to determine regional calcium loss. Various designs for regional analysis were investigated

Development of a hybrid robotic system based on an adaptive and associative assistance for rehabilitation of reaching movement after stroke

Stroke causes irreversible neurological damage. Depending on the location and the size of this brain injury, different body functions could result affected. One of the most common consequences is motor impairments. The level of motor impairment affectation varies between post-stroke subjects, but often, it hampers the execution of most activities of daily living. Consequently, the quality of life of the stroke population is severely decreased. The rehabilitation of the upper-limb motor functions has gained special attention in the scientific community due the poor reported prognosis of post-stroke patients for recovering normal upper-extremity function after standard rehabilitation therapy. Driven by the advance of technology and the design of new rehabilitation methods, the use of robot devices, functional electrical stimulation and brain-computer interfaces as a neuromodulation system is proposed as a novel and promising rehabilitation tools. Although the uses of these technologies present potential benefits with respect to standard rehabilitation methods, there still are some milestones to be addressed for the consolidation of these methods and techniques in clinical settings. Mentioned evidences reflect the motivation for this dissertation. This thesis presents the development and validation of a hybrid robotic system based on an adaptive and associative assistance for rehabilitation of reaching movements in post-stroke subjects. The hybrid concept refers the combined use of robotic devices with functional electrical stimulation. Adaptive feature states a tailored assistance according to the users’ motor residual capabilities, while the associative term denotes a precise pairing between the users’ motor intent and the peripheral hybrid assistance. The development of the hybrid platform comprised the following tasks: 1. The identification of the current challenges for hybrid robotic system, considering twofold perspectives: technological and clinical. The hybrid systems submitted in literature were critically reviewed for such purpose. These identified features will lead the subsequent development and method framed in this work. 2. The development and validation of a hybrid robotic system, combining a mechanical exoskeleton with functional electrical stimulation to assist the execution of functional reaching movements. Several subsystems are integrated within the hybrid platform, which interact each other to cooperatively complement the rehabilitation task. Complementary, the implementation of a controller based on functional electrical stimulation to dynamically adjust the level of assistance is addressed. The controller is conceived to tackle one of the main limitations when using electrical stimulation, i.e. the highly nonlinear and time-varying muscle response. An experimental procedure was conducted with healthy and post-stroke patients to corroborate the technical feasibility and the usability evaluation of the system. 3. The implementation of an associative strategy within the hybrid platform. Three different strategies based on electroencephalography and electromyography signals were analytically compared. The main idea is to provide a precise temporal association between the hybrid assistance delivered at the periphery (arm muscles) and the users’ own intention to move and to configure a feasible clinical setup to be use in real rehabilitation scenarios. 4. Carry out a comprehensive pilot clinical intervention considering a small cohort of patient with post-stroke patients to evaluate the different proposed concepts and assess the feasibility of using the hybrid system in rehabilitation settings. In summary, the works here presented prove the feasibility of using the hybrid robotic system as a rehabilitative tool with post-stroke subjects. Moreover, it is demonstrated the adaptive controller is able to adjust the level of assistance to achieve successful tracking movement with the affected arm. Remarkably, the accurate association in time between motor cortex activation, represented through the motor-related cortical potential measured with electroencephalography, and the supplied hybrid assistance during the execution of functional (multidegree of freedom) reaching movement facilitate distributed cortical plasticity. These results encourage the validation of the overall hybrid concept in a large clinical trial including an increased number of patients with a control group, in order to achieve more robust clinical results and confirm the presented herein.Programa Oficial de Doctorado en Ingeniería Eléctrica, Electrónica y AutomáticaPresidente: Ramón Ceres Ruiz.- Secretario: Luis Enrique Moreno Lorente.- Vocal: Antonio Olivier

Physical Therapy Following Shoulder Rotator Cuff Repair

ABSTRACT Introduction Rotator cuff (RC) tears are one of the common causes of pain and disability in the upper extremity. Currently there are no fixed guidelines for choosing testing positions for shoulder range of motion measurement. Optimal rehabilitation following RC repair is yet to be defined. Purpose and Method The purpose was to inform about postoperative Physical therapy following rotator cuff repair, with the following objectives: To systematically review the content of clinical research, which addresses various physical therapy programs. To describe validity and responsiveness of different testing positions for goniometric measurement of shoulder active external rotation. To pilot test study procedures and estimating effects of a land-based and an aquatic exercise program. Results Fourteen studies were included in the systematic review. ROM measurements in sitting and supine positions correlated moderately (r= 0.40 - 0.53). The sitting position showed greater sensitivity to change with estimates of standardized response mean (SRM) and effect size (ES) (SRM: 0.66, 1.05 and ES: 0.50, 1.02) as compared to the supine position (SRM: 0.39, 0.74 and ES: 0.37, 0.76) at 3 and 12 months postoperatively, respectively. A total of 12 patients with a 67% recruitment rate, participated. Clinic visit adherence was 95%. No one was lost to follow-up. Both land-based and land plus aquatic exercise groups showed improved flexion AROM over time (Mean change= 21°, Standard Deviation (SD)= 25° and Mean change= 22°, SD= 33° respectively). For future studies, for having 80% power (α= 0.05, β= 0.20), and to detect 20% between-group difference, a total of 33 patients per group would be needed. Conclusions The systematic review found that exercise therapy including adjunctive interventions has small to moderate effect. 29% of the patients could not undergo active shoulder external rotation testing in supine, all patients could be tested in sitting. The sitting position has higher responsiveness than the supine position. Both land-based and aquatic exercise programs are shown to be feasible. To achieve power, we recommend future studies with larger sample size. Keywords Physical therapy, rotator cuff tear, land-based exercises, aquatic exercises, systematic review, pilot study

Mapping Trabecular Bone Fabric Tensor by in Vivo Magnetic Resonance Imaging

The mechanical competence of bone depends upon its quantity, structural arrangement, and chemical composition. Assessment of these factors is important for the evaluation of bone integrity, particularly as the skeleton remodels according to external (e.g. mechanical loading) and internal (e.g. hormonal changes) stimuli. Micro magnetic resonance imaging (µMRI) has emerged as a non-invasive and non-ionizing method well-suited for the repeated measurements necessary for monitoring changes in bone integrity. However, in vivo image-based directional dependence of trabecular bone (TB) has not been linked to mechanical competence or fracture risk despite the existence of convincing ex vivo evidence. The objective of this dissertation research was to develop a means of capturing the directional dependence of TB by assessing a fabric tensor on the basis of in vivo µMRI. To accomplish this objective, a novel approach for calculating the TB fabric tensor based on the spatial autocorrelation function was developed and evaluated in the presence of common limitations to in vivo µMRI. Comparisons were made to the standard technique of mean-intercept-length (MIL). Relative to MIL, ACF was identified as computationally faster by over an order of magnitude and more robust within the range of the resolutions and SNRs achievable in vivo. The potential for improved sensitivity afforded by isotropic resolution was also investigated in an improved µMR imaging protocol at 3T. Measures of reproducibility and reliability indicate the potential of images with isotropic resolution to provide enhanced sensitivity to orientation-dependent measures of TB, however overall reproducibility suffered from the sacrifice in SNR. Finally, the image-derived TB fabric tensor was validated through its relationship with TB mechanical competence in specimen and in vivo µMR images. The inclusion of trabecular bone fabric measures significantly improved the bone volume fraction-based prediction of elastic constants calculated by micro-finite element analysis. This research established a method for detecting TB fabric tensor in vivo and identified the directional dependence of TB as an important determinant of TB mechanical competence