Cooperative bathymetry-based localization using low-cost autonomous underwater vehicles

We present a cooperative bathymetry-based localization approach for a team of low-cost autonomous underwater vehicles (AUVs), each equipped only with a single-beam altimeter, a depth sensor and an acoustic modem. The localization of the individual AUV is achieved via fully decentralized particle filtering, with the local filter’s measurement model driven by the AUV’s altimeter measurements and ranging information obtained through inter-vehicle communication. We perform empirical analysis on the factors that affect the filter performance. Simulation studies using randomly generated trajectories as well as trajectories executed by the AUVs during field experiments successfully demonstrate the feasibility of the technique. The proposed cooperative localization technique has the potential to prolong AUV mission time, and thus open the door for long-term autonomy underwater.Massachusetts Institute of Technology. Department of Mechanical EngineeringSingapore-MIT Alliance for Research and Technology (SMART) (Graduate Fellowship

Characterization of optical communication in a leader-follower unmanned underwater vehicle formation

As part of the research to development an optical communication design of a leader-follower formation between unmanned underwater vehicles (UUVs), this paper presents light field characterization and design configuration of the hardware required to allow the use of distance detection between UUVs. The study specifically is targeting communication between remotely operated vehicles (ROVs). As an initial step in this study, the light field produced from a light source mounted on the leader UUV was empirically characterized and modeled. Based on the light field measurements, a photo-detector array for the follower UUV was designed. Evaluation of the communication algorithms to monitor the UUV’s motion was conducted through underwater experiments in the Ocean Engineering Laboratory at the University of New Hampshire. The optimal spectral range was determined based on the calculation of the diffuse attenuation coefficients by using two different light sources and a spectrometer. The range between the leader and the follower vehicles for a specific water type was determined. In addition, the array design and the communication algorithms were modified according to the results from the light field

Augmented Terrain-Based Navigation to Enable Persistent Autonomy for Underwater Vehicles in GPS-Denied Environments

Aquatic robots, such as Autonomous Underwater Vehicles (AUVs), play a major role in the study of ocean processes that require long-term sampling efforts and commonly perform navigation via dead-reckoning using an accelerometer, a magnetometer, a compass, an IMU and a depth sensor for feedback. However, these instruments are subjected to large drift, leading to unbounded uncertainty in location. Moreover, the spatio-temporal dynamics of the ocean environment, coupled with limited communication capabilities, make navigation and localization difficult, especially in coastal regions where the majority of interesting phenomena occur. To add to this, the interesting features are themselves spatio-temporally dynamic, and effective sampling requires a good understanding of vehicle localization relative to the sampled feature. Therefore, our work is motivated by the desire to enable intelligent data collection of complex dynamics and processes that occur in coastal ocean environments to further our understanding and prediction capabilities. The study originated from the need to localize and navigate aquatic robots in a GPS-denied environment and examine the role of the spatio-temporal dynamics of the ocean into the localization and navigation processes. The methods and techniques needed range from the data collection to the localization and navigation algorithms used on-board of the aquatic vehicles. The focus of this work is to develop algorithms for localization and navigation of AUVs in GPS-denied environments. We developed an Augmented terrain-based framework that incorporates physical science data, i.e., temperature, salinity, pH, etc., to enhance the topographic map that the vehicle uses to navigate. In this navigation scheme, the bathymetric data are combined with the physical science data to enrich the uniqueness of the underlying terrain map and increase the accuracy of underwater localization. Another technique developed in this work addresses the problem of tracking an underwater vehicle when the GPS signal suddenly becomes unavailable. The methods include the whitening of the data to reveal the true statistical distance between datapoints and also incorporates physical science data to enhance the topographic map. Simulations were performed at Lake Nighthorse, Colorado, USA, between April 25th and May 2nd 2018 and at Big Fisherman\u27s Cove, Santa Catalina Island, California, USA, on July 13th and July 14th 2016. Different missions were executed on different environments (snow, rain and the presence of plumes). Results showed that these two methodologies for localization and tracking work for reference maps that had been recorded within a week and the accuracy on the average error in localization can be compared to the errors found when using GPS if the time in which the observations were taken are the same period of the day (morning, afternoon or night). The whitening of the data had positive results when compared to localizing without whitening

State of art of bathymetric surveys

Technological advances in bathymetric equipment, positioning capacity, data processing, as well as the development of new ways of obtaining depth and other ways of exploring the submerged bottom, have been noticed in recent years. It is known that acoustic remote sensing is the most widely used technique for depth measurement. Survey systems can be embedded on various platforms and also provide different accuracies. Coupled to these systems are also Global Navigation Satellite System (GNSS), auxiliary sensors and speed profilers, improving the accuracy of the data obtained. Alternatively to the use of echo sounders, optical sensing (active and passive sensors) or satellite radar altimetry can be used to estimate depth. Thus, this study aims to present an overview of bathymetric survey methodologies, as well as the evolution of the use of sounding platforms, systems and sensors and various existing technologies. In addition, the main uncertainties involved and the advantages and disadvantages of the available solutions are also evidenced, providing the reader the ability to choose the most appropriate technique

An Autonomous Surface Vehicle for Long Term Operations

Environmental monitoring of marine environments presents several challenges: the harshness of the environment, the often remote location, and most importantly, the vast area it covers. Manual operations are time consuming, often dangerous, and labor intensive. Operations from oceanographic vessels are costly and limited to open seas and generally deeper bodies of water. In addition, with lake, river, and ocean shoreline being a finite resource, waterfront property presents an ever increasing valued commodity, requiring exploration and continued monitoring of remote waterways. In order to efficiently explore and monitor currently known marine environments as well as reach and explore remote areas of interest, we present a design of an autonomous surface vehicle (ASV) with the power to cover large areas, the payload capacity to carry sufficient power and sensor equipment, and enough fuel to remain on task for extended periods. An analysis of the design and a discussion on lessons learned during deployments is presented in this paper.Comment: In proceedings of MTS/IEEE OCEANS, 2018, Charlesto

Autonomous sampling of ocean submesoscale fronts with ocean gliders and numerical model forecasting

Submesoscale fronts arising from mesoscale stirring are ubiquitous in the ocean and have a strong impact on upper-ocean dynamics. This work presents a method for optimizing the sampling of ocean fronts with autonomous vehicles at meso- and submesoscales, based on a combination of numerical forecast and autonomous planning. This method uses a 48-h forecast from a real-time high-resolution data-assimilative primitive equation ocean model, feature detection techniques, and a planner that controls the observing platform. The method is tested in Monterey Bay, off the coast of California, during a 9-day experiment focused on sampling subsurface thermohaline-compensated structures using a Seaglider as the ocean observing platform. Based on model estimations, the sampling “gain,” defined as the magnitude of isopycnal tracer variability sampled, is 50% larger in the feature-chasing case with respect to a non-feature-tracking scenario. The ability of the model to reproduce, in space and time, thermohaline submesoscale features is evaluated by quantitatively comparing the model and glider results. The model reproduces the vertical (~50–200 m thick) and lateral (~5–20 km) scales of subsurface subducting fronts and near-bottom features observed in the glider data. The differences between model and glider data are, in part, attributed to the selected glider optimal interpolation parameters and to uncertainties in the forecasting of the location of the structures. This method can be exported to any place in the ocean where high-resolution data-assimilative model output is available, and it allows for the incorporation of multiple observing platforms

Autonomous sampling of ocean submesoscale fronts with ocean gliders and numerical model forecasting

Submesoscale fronts arising from mesoscale stirring are ubiquitous in the ocean and have a strong impact on upper-ocean dynamics. This work presents a method for optimizing the sampling of ocean fronts with autonomous vehicles at meso- and submesoscales, based on a combination of numerical forecast and autonomous planning. This method uses a 48-h forecast from a real-time high-resolution data-assimilative primitive equation ocean model, feature detection techniques, and a planner that controls the observing platform. The method is tested in Monterey Bay, off the coast of California, during a 9-day experiment focused on sampling subsurface thermohaline-compensated structures using a Seaglider as the ocean observing platform. Based on model estimations, the sampling “gain,” defined as the magnitude of isopycnal tracer variability sampled, is 50% larger in the feature-chasing case with respect to a non-feature-tracking scenario. The ability of the model to reproduce, in space and time, thermohaline submesoscale features is evaluated by quantitatively comparing the model and glider results. The model reproduces the vertical (~50–200 m thick) and lateral (~5–20 km) scales of subsurface subducting fronts and near-bottom features observed in the glider data. The differences between model and glider data are, in part, attributed to the selected glider optimal interpolation parameters and to uncertainties in the forecasting of the location of the structures. This method can be exported to any place in the ocean where high-resolution data-assimilative model output is available, and it allows for the incorporation of multiple observing platforms

Cooperative algorithms for a team of autonomous underwater vehicles

Ph.DDOCTOR OF PHILOSOPH

Underwater Robots Part I: Current Systems and Problem Pose

International audienceThis paper constitutes the first part of a general overview of underwater robotics. The second part is titled: Underwater Robots Part II: existing solutions and open issues

Automated characterisation of Deep-sea imagery using Machine Learning: implications for future conservation and mineral extraction

This thesis aimed to develop a methodology using Machine Learning (ML) techniques for the interpretation of deep-sea resources. The deep-sea hosts diverse ecosystems and valuable resources, but potential environmental implications, particularly from mining activities, necessitate effective management strategies. Detailed maps of the sea floor are therefore a necessity, yet such maps have to date only been produced based on manual interpretation which is time consuming and subjective. The study focused on assessing the potential of ML methods to map deep-sea features based on photomosaic and bathymetry data in order to take the first steps in developing an automated, objective, and time-saving technique. This thesis’s method accurately identified and classified features like chimneys at the hydrothermal vent fields, providing insights for resource interpretation and conservation. Integrating ML methods into deep-sea resource management is crucial. The methodology enhances understanding of complex techniques, such as Convolutional Neural Networks (CNN) and Object-Based Image Analysis (OBIA) to overcome a seabed characterization. Simultaneously describing the parameters utilised to achieve a meaningful classification. ML algorithms analyze large data volumes, extract patterns, and predict feature distributions, aiding targeted conservation measures and sustainable resource exploitation. The methodology successfully mapped hydrothermal chimneys in two study areas yet producer accuracies (0,7%) were higher than user accuracies (0,64%), indicating that there were other landforms that shared similar features. The methodology also helps assess potential environmental implications of future mining, supporting informed decision-making and mitigation strategies. It serves also as a foundation for future research to aim at overcoming problems related to incomplete spatial coverage, attempt to better utilize shape and spatial parameters within the OBIA refinement, try to identify more background classes for excluding them from the model, etc.Master's Thesis in Earth ScienceGEOV399MAMN-GEO