Probabilistic pointer analysis for multithreaded programs

The use of pointers and data-structures based on pointers results in circular memory references that are interpreted by a vital compiler analysis, namely pointer analysis. For a pair of memory references at a program point, a typical pointer analysis specifies if the points-to relation between them may exist, definitely does not exist, or definitely exists. The "may be" case, which describes the points-to relation for most of the pairs, cannot be dealt with by most compiler optimizations. This is so to guarantee the soundness of these optimizations. However, the "may be" case can be capitalized by the modern class of speculative optimizations if the probability that two memory references alias can be measured. Focusing on multithreading, a prevailing technique of programming, this paper presents a new flow-sensitive technique for probabilistic pointer analysis of multithreaded programs. The proposed technique has the form of a type system and calculates the probability of every points-to relation at each program point. The key to our approach is to calculate the points-to information via a post-type derivation. The use of type systems has the advantage of associating each analysis results with a justification (proof) for the correctness of the results. This justification has the form of a type derivation and is very much required in applications like certified code.Comment: 12 page

Understanding Uncertainty in Static Pointer Analysis

Institute for Computing Systems ArchitectureFor programs that make extensive use of pointers, pointer analysis is often critical for the effectiveness of optimising compilers and tools for reasoning about program behaviour and correctness. Static pointer analysis has been extensively studied and several algorithms have been proposed, but these only provide approximate solutions. As such inaccuracy may hinder further optimisations, it is important to understand how short these algorithms come of providing accurate information about the points-to relations. This thesis attempts to quantify the amount of uncertainty of the points-to relations that remains after a state-of-the-art context- and flow-sensitive pointer analysis algorithm is applied to a collection of programs from two well-known benchmark suites: SPEC integer and MediaBench. This remaining static uncertainty is then compared to the run-time behaviour. Unlike previous work that compared run-time behaviour against less accurate context- and flow-insensitive algorithms, the goal of this work is to quantify the amount of uncertainty that is intrinsic to the applications and that defeat even the most accurate static analyses. In a first step to quantify the uncertainties, a compiler framework was proposed and implemented. It is based on the SUIF1 research compiler framework and the SPAN pointer analysis package. This framework was then used to collect extensive data from the static points-to analysis. It was also used to drive a profiled execution of the programs in order to collect the real run-time points-to data. Finally, the static and the run-time data were compared. Experimental results show that often the static pointer analysis is very accurate, but for some benchmarks a significant fraction, up to 25%, of their accesses via pointer dereferences cannot be statically fully disambiguated. We find that some 27% of these de-references turn out to access a single memory location at run time, but many do access several different memory locations. We find that the main reasons for this are the use of pointer arithmetic and the fact that some control paths are not taken. The latter is an example of a source of uncertainty that is intrinsic to the application

Hybrid analysis of memory references and its application to automatic parallelization

Executing sequential code in parallel on a multithreaded machine has been an elusive goal of the academic and industrial research communities for many years. It has recently become more important due to the widespread introduction of multicores in PCs. Automatic multithreading has not been achieved because classic, static compiler analysis was not powerful enough and program behavior was found to be, in many cases, input dependent. Speculative thread level parallelization was a welcome avenue for advancing parallelization coverage but its performance was not always optimal due to the sometimes unnecessary overhead of checking every dynamic memory reference. In this dissertation we introduce a novel analysis technique, Hybrid Analysis, which unifies static and dynamic memory reference techniques into a seamless compiler framework which extracts almost maximum available parallelism from scientific codes and incurs close to the minimum necessary run time overhead. We present how to extract maximum information from the quantities that could not be sufficiently analyzed through static compiler methods, and how to generate sufficient conditions which, when evaluated dynamically, can validate optimizations. Our techniques have been fully implemented in the Polaris compiler and resulted in whole program speedups on a large number of industry standard benchmark applications

木を用いた構造化並列プログラミング

High-level abstractions for parallel programming are still immature. Computations on complicated data structures such as pointer structures are considered as irregular algorithms. General graph structures, which irregular algorithms generally deal with, are difficult to divide and conquer. Because the divide-and-conquer paradigm is essential for load balancing in parallel algorithms and a key to parallel programming, general graphs are reasonably difficult. However, trees lead to divide-and-conquer computations by definition and are sufficiently general and powerful as a tool of programming. We therefore deal with abstractions of tree-based computations. Our study has started from Matsuzaki’s work on tree skeletons. We have improved the usability of tree skeletons by enriching their implementation aspect. Specifically, we have dealt with two issues. We first have implemented the loose coupling between skeletons and data structures and developed a flexible tree skeleton library. We secondly have implemented a parallelizer that transforms sequential recursive functions in C into parallel programs that use tree skeletons implicitly. This parallelizer hides the complicated API of tree skeletons and makes programmers to use tree skeletons with no burden. Unfortunately, the practicality of tree skeletons, however, has not been improved. On the basis of the observations from the practice of tree skeletons, we deal with two application domains: program analysis and neighborhood computation. In the domain of program analysis, compilers treat input programs as control-flow graphs (CFGs) and perform analysis on CFGs. Program analysis is therefore difficult to divide and conquer. To resolve this problem, we have developed divide-and-conquer methods for program analysis in a syntax-directed manner on the basis of Rosen’s high-level approach. Specifically, we have dealt with data-flow analysis based on Tarjan’s formalization and value-graph construction based on a functional formalization. In the domain of neighborhood computations, a primary issue is locality. A naive parallel neighborhood computation without locality enhancement causes a lot of cache misses. The divide-and-conquer paradigm is known to be useful also for locality enhancement. We therefore have applied algebraic formalizations and a tree-segmenting technique derived from tree skeletons to the locality enhancement of neighborhood computations.電気通信大学201

Profile-driven parallelisation of sequential programs

Traditional parallelism detection in compilers is performed by means of static analysis and more specifically data and control dependence analysis. The information that is available at compile time, however, is inherently limited and therefore restricts the parallelisation opportunities. Furthermore, applications written in C – which represent the majority of today’s scientific, embedded and system software – utilise many lowlevel features and an intricate programming style that forces the compiler to even more conservative assumptions. Despite the numerous proposals to handle this uncertainty at compile time using speculative optimisation and parallelisation, the software industry still lacks any pragmatic approaches that extracts coarse-grain parallelism to exploit the multiple processing units of modern commodity hardware. This thesis introduces a novel approach for extracting and exploiting multiple forms of coarse-grain parallelism from sequential applications written in C. We utilise profiling information to overcome the limitations of static data and control-flow analysis enabling more aggressive parallelisation. Profiling is performed using an instrumentation scheme operating at the Intermediate Representation (Ir) level of the compiler. In contrast to existing approaches that depend on low-level binary tools and debugging information, Ir-profiling provides precise and direct correlation of profiling information back to the Ir structures of the compiler. Additionally, our approach is orthogonal to existing automatic parallelisation approaches and additional fine-grain parallelism may be exploited. We demonstrate the applicability and versatility of the proposed methodology using two studies that target different forms of parallelism. First, we focus on the exploitation of loop-level parallelism that is abundant in many scientific and embedded applications. We evaluate our parallelisation strategy against the Nas and Spec Fp benchmarks and two different multi-core platforms (a shared-memory Intel Xeon Smp and a heterogeneous distributed-memory Ibm Cell blade). Empirical evaluation shows that our approach not only yields significant improvements when compared with state-of- the-art parallelising compilers, but comes close to and sometimes exceeds the performance of manually parallelised codes. On average, our methodology achieves 96% of the performance of the hand-tuned parallel benchmarks on the Intel Xeon platform, and a significant speedup for the Cell platform. The second study, addresses the problem of partially sequential loops, typically found in implementations of multimedia codecs. We develop a more powerful whole-program representation based on the Program Dependence Graph (Pdg) that supports profiling, partitioning and codegeneration for pipeline parallelism. In addition we demonstrate how this enhances conventional pipeline parallelisation by incorporating support for multi-level loops and pipeline stage replication in a uniform and automatic way. Experimental results using a set of complex multimedia and stream processing benchmarks confirm the effectiveness of the proposed methodology that yields speedups up to 4.7 on a eight-core Intel Xeon machine

Reducing exception management overhead with software restart markers

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2008.Includes bibliographical references (p. 181-196).Modern processors rely on exception handling mechanisms to detect errors and to implement various features such as virtual memory. However, these mechanisms are typically hardware-intensive because of the need to buffer partially-completed instructions to implement precise exceptions and enforce in-order instruction commit, often leading to issues with performance and energy efficiency. The situation is exacerbated in highly parallel machines with large quantities of programmer-visible state, such as VLIW or vector processors. As architects increasingly rely on parallel architectures to achieve higher performance, the problem of exception handling is becoming critical. In this thesis, I present software restart markers as the foundation of an exception handling mechanism for explicitly parallel architectures. With this model, the compiler is responsible for delimiting regions of idempotent code. If an exception occurs, the operating system will resume execution from the beginning of the region. One advantage of this approach is that instruction results can be committed to architectural state in any order within a region, eliminating the need to buffer those values. Enabling out-of-order commit can substantially reduce the exception management overhead found in precise exception implementations, and enable the use of new architectural features that might be prohibitively costly with conventional precise exception implementations. Additionally, software restart markers can be used to reduce context switch overhead in a multiprogrammed environment. This thesis demonstrates the applicability of software restart markers to vector, VLIW, and multithreaded architectures. It also contains an implementation of this exception handling approach that uses the Trimaran compiler infrastructure to target the Scale vectorthread architecture. I show that using software restart markers incurs very little performance overhead for vector-style execution on Scale.(cont.) Finally, I describe the Scale compiler flow developed as part of this work and discuss how it targets certain features facilitated by the use of software restart markersby Mark Jerome Hampton.Ph.D

A data dependency recovery system for a heterogeneous multicore processor

Multicore processors often increase the performance of applications. However, with their deeper pipelining, they have proven increasingly difficult to improve. In an attempt to deliver enhanced performance at lower power requirements, semiconductor microprocessor manufacturers have progressively utilised chip-multicore processors. Existing research has utilised a very common technique known as thread-level speculation. This technique attempts to compute results before the actual result is known. However, thread-level speculation impacts operation latency, circuit timing, confounds data cache behaviour and code generation in the compiler. We describe an software framework codenamed Lyuba that handles low-level data hazards and automatically recovers the application from data hazards without programmer and speculation intervention for an asymmetric chip-multicore processor. The problem of determining correct execution of multiple threads when data hazards occur on conventional symmetrical chip-multicore processors is a significant and on-going challenge. However, there has been very little focus on the use of asymmetrical (heterogeneous) processors with applications that have complex data dependencies. The purpose of this thesis is to: (i) define the development of a software framework for an asymmetric (heterogeneous) chip-multicore processor; (ii) present an optimal software control of hardware for distributed processing and recovery from violations;(iii) provides performance results of five applications using three datasets. Applications with a small dataset showed an improvement of 17% and a larger dataset showed an improvement of 16% giving overall 11% improvement in performance

Transparent management of scratchpad memories in shared memory programming models

Cache-coherent shared memory has traditionally been the favorite memory organization for chip multiprocessors thanks to its high programmability. In this organization the cache hierarchy is in charge of moving the data and keeping it coherent between all the caches, enabling the usage of shared memory programming models where the programmer does not need to carry out any data management operation. Unfortunately, performing all the data management operations in hardware causes severe problems, being the primary concerns the power consumption originated in the caches and the amount of coherence traffic in the interconnection network. A good solution is to introduce ScratchPad Memories (SPMs) alongside the cache hierarchy, forming a hybrid memory hierarchy. SPMs are more power-efficient than caches and do not generate coherence traffic, but they degrade programmability. In particular, SPMs require the programmer to partition the data, to program data transfers, and to keep coherence between different copies of the data. A promising solution to exploit the benefits of the SPMs without harming programmability is to allow programmers to use shared memory programming models and to automatically generate code that manages the SPMs. Unfortunately, current compilers and runtime systems encounter serious limitations to automatically generate code for hybrid memory hierarchies from shared memory programming models. This thesis proposes to transparently manage the SPMs of hybrid memory hierarchies in shared memory programming models. In order to achieve this goal this thesis proposes a combination of hardware and compiler techniques to manage the SPMs in fork-join programming models and a set of runtime system techniques to manage the SPMs in task programming models. The proposed techniques allow to program hybrid memory hierarchies with these two well-known and easy-to-use forms of shared memory programming models, capitalizing on the benefits of hybrid memory hierarchies in power consumption and network traffic without harming programmability. The first contribution of this thesis is a hardware/software co-designed coherence protocol to transparently manage the SPMs of hybrid memory hierarchies in fork-join programming models. The solution allows the compiler to always generate code to manage the SPMs with tiling software caches, even in the presence of unknown memory aliasing hazards between memory references to the SPMs and to the cache hierarchy. On the software side, the compiler generates a special form of memory instruction for memory references with possible aliasing hazards. On the hardware side, the special memory instructions are diverted to the correct copy of the data using a set of directories that track what data is mapped to the SPMs. The second contribution of this thesis is a set of runtime system techniques to manage the SPMs of hybrid memory hierarchies in task programming models. The proposed runtime system techniques exploit the characteristics of these programming models to map the data specified in the task dependences to the SPMs. Different policies are proposed to mitigate the communication costs of the data transfers, overlapping them with other execution phases such as the task scheduling phase or the execution of the previous task. The runtime system can also reduce the number of data transfers by using a task scheduler that exploits data locality in the SPMs. In addition, the proposed techniques are combined with mechanisms that reduce the impact of fine-grained tasks, such as hardware runtime systems or large SPM sizes. The accomplishment of this thesis is that hybrid memory hierarchies can be programmed with fork-join and task programming models. Consequently, architectures with hybrid memory hierarchies can be exposed to the programmer as a shared memory multiprocessor, taking advantage of the benefits of the SPMs while maintaining the programming simplicity of shared memory programming models.La memoria compartida con coherencia de caches es la jerarquía de memoria más utilizada en multiprocesadores gracias a su programabilidad. En esta solución la jerarquía de caches se encarga de mover los datos y mantener la coherencia entre las caches, habilitando el uso de modelos de programación de memoria compartida donde el programador no tiene que realizar ninguna operación para gestionar las memorias. Desafortunadamente, realizar estas operaciones en la arquitectura causa problemas severos, siendo especialmente relevantes el consumo de energía de las caches y la cantidad de tráfico de coherencia en la red de interconexión. Una buena solución es añadir Memorias ScratchPad (SPMs) acompañando la jerarquía de caches, formando una jerarquía de memoria híbrida. Las SPMs son más eficientes en energía y tráfico de coherencia, pero dificultan la programabilidad ya que requieren que el programador particione los datos, programe transferencias de datos y mantenga la coherencia entre diferentes copias de datos. Una solución prometedora para beneficiarse de las ventajas de las SPMs sin dificultar la programabilidad es permitir que el programador use modelos de programación de memoria compartida y generar código para gestionar las SPMs automáticamente. El problema es que los compiladores y los entornos de ejecución actuales sufren graves limitaciones al gestionar automáticamente una jerarquía de memoria híbrida en modelos de programación de memoria compartida. Esta tesis propone gestionar automáticamente una jerarquía de memoria híbrida en modelos de programación de memoria compartida. Para conseguir este objetivo esta tesis propone una combinación de técnicas hardware y de compilador para gestionar las SPMs en modelos de programación fork-join, y técnicas en entornos de ejecución para gestionar las SPMs en modelos de programación basados en tareas. Las técnicas propuestas hacen que las jerarquías de memoria híbridas puedan programarse con estos dos modelos de programación de memoria compartida, de tal forma que las ventajas en energía y tráfico de coherencia se puedan explotar sin dificultar la programabilidad. La primera contribución de esta tesis en un protocolo de coherencia hardware/software para gestionar SPMs en modelos de programación fork-join. La propuesta consigue que el compilador siempre pueda generar código para gestionar las SPMs, incluso cuando hay posibles alias de memoria entre referencias a memoria a las SPMs y a la jerarquía de caches. En la solución el compilador genera instrucciones especiales para las referencias a memoria con posibles alias, y el hardware sirve las instrucciones especiales con la copia válida de los datos usando directorios que guardan información sobre qué datos están mapeados en las SPMs. La segunda contribución de esta tesis son una serie de técnicas para gestionar SPMs en modelos de programación basados en tareas. Las técnicas aprovechan las características de estos modelos de programación para mapear las dependencias de las tareas en las SPMs y se complementan con políticas para minimizar los costes de las transferencias de datos, como solaparlas con fases del entorno de ejecución o la ejecución de tareas anteriores. El número de transferencias también se puede reducir utilizando un planificador que tenga en cuenta la localidad de datos y, además, las técnicas se pueden combinar con mecanismos para reducir los efectos negativos de tener tareas pequeñas, como entornos de ejecución en hardware o SPMs de más capacidad. Las propuestas de esta tesis consiguen que las jerarquías de memoria híbridas se puedan programar con modelos de programación fork-join y basados en tareas. En consecuencia, las arquitecturas con jerarquías de memoria híbridas se pueden exponer al programador como multiprocesadores de memoria compartida, beneficiándose de las ventajas de las SPMs en energía y tráfico de coherencia y manteniendo la simplicidad de uso de los modelos de programación de memoria compartida

Structured parallelism discovery with hybrid static-dynamic analysis and evaluation technique

Parallel computer architectures have dominated the computing landscape for the past two decades; a trend that is only expected to continue and intensify, with increasing specialization and heterogeneity. This creates huge pressure across the software stack to produce programming languages, libraries, frameworks and tools which will efficiently exploit the capabilities of parallel computers, not only for new software, but also revitalizing existing sequential code. Automatic parallelization, despite decades of research, has had limited success in transforming sequential software to take advantage of efficient parallel execution. This thesis investigates three approaches that use commutativity analysis as the enabler for parallelization. This has the potential to overcome limitations of traditional techniques. We introduce the concept of liveness-based commutativity for sequential loops. We examine the use of a practical analysis utilizing liveness-based commutativity in a symbolic execution framework. Symbolic execution represents input values as groups of constraints, consequently deriving the output as a function of the input and enabling the identification of further program properties. We employ this feature to develop an analysis and discern commutativity properties between loop iterations. We study the application of this approach on loops taken from real-world programs in the OLDEN and NAS Parallel Benchmark (NPB) suites, and identify its limitations and related overheads. Informed by these findings, we develop Dynamic Commutativity Analysis (DCA), a new technique that leverages profiling information from program execution with specific input sets. Using profiling information, we track liveness information and detect loop commutativity by examining the code’s live-out values. We evaluate DCA against almost 1400 loops of the NPB suite, discovering 86% of them as parallelizable. Comparing our results against dependence-based methods, we match the detection efficacy of two dynamic and outperform three static approaches, respectively. Additionally, DCA is able to automatically detect parallelism in loops which iterate over Pointer-Linked Data Structures (PLDSs), taken from wide range of benchmarks used in the literature, where all other techniques we considered failed. Parallelizing the discovered loops, our methodology achieves an average speedup of 3.6× across NPB (and up to 55×) and up to 36.9× for the PLDS-based loops on a 72-core host. We also demonstrate that our methodology, despite relying on specific input values for profiling each program, is able to correctly identify parallelism that is valid for all potential input sets. Lastly, we develop a methodology to utilize liveness-based commutativity, as implemented in DCA, to detect latent loop parallelism in the shape of patterns. Our approach applies a series of transformations which subsequently enable multiple applications of DCA over the generated multi-loop code section and match its loop commutativity outcomes against the expected criteria for each pattern. Applying our methodology on sets of sequential loops, we are able to identify well-known parallel patterns (i.e., maps, reduction and scans). This extends the scope of parallelism detection to loops, such as those performing scan operations, which cannot be determined as parallelizable by simply evaluating liveness-based commutativity conditions on their original form

Efficient optimization of memory accesses in parallel programs

The power, frequency, and memory wall problems have caused a major shift in mainstream computing by introducing processors that contain multiple low power cores. As multi-core processors are becoming ubiquitous, software trends in both parallel programming languages and dynamic compilation have added new challenges to program compilation for multi-core processors. This thesis proposes a combination of high-level and low-level compiler optimizations to address these challenges. The high-level optimizations introduced in this thesis include new approaches to May-Happen-in-Parallel analysis and Side-Effect analysis for parallel programs and a novel parallelism-aware Scalar Replacement for Load Elimination transformation. A new Isolation Consistency (IC) memory model is described that permits several scalar replacement transformation opportunities compared to many existing memory models. The low-level optimizations include a novel approach to register allocation that retains the compile time and space efficiency of Linear Scan, while delivering runtime performance superior to both Linear Scan and Graph Coloring. The allocation phase is modeled as an optimization problem on a Bipartite Liveness Graph (BLG) data structure. The assignment phase focuses on reducing the number of spill instructions by using register-to-register move and exchange instructions wherever possible. Experimental evaluations of our scalar replacement for load elimination transformation in the Jikes RVM dynamic compiler show decreases in dynamic counts for getfield operations of up to 99.99%, and performance improvements of up to 1.76x on 1 core, and 1.39x on 16 cores, when compared with the load elimination algorithm available in Jikes RVM. A prototype implementation of our BLG register allocator in Jikes RVM demonstrates runtime performance improvements of up to 3.52x relative to Linear Scan on an x86 processor. When compared to Graph Coloring register allocator in the GCC compiler framework, our allocator resulted in an execution time improvement of up to 5.8%, with an average improvement of 2.3% on a POWER5 processor. With the experimental evaluations combined with the foundations presented in this thesis, we believe that the proposed high-level and low-level optimizations are useful in addressing some of the new challenges emerging in the optimization of parallel programs for multi-core architectures