Channelization for Multi-Standard Software-Defined Radio Base Stations

As the number of radio standards increase and spectrum resources come under more pressure, it becomes ever less efficient to reserve bands of spectrum for exclusive use by a single radio standard. Therefore, this work focuses on channelization structures compatible with spectrum sharing among multiple wireless standards and dynamic spectrum allocation in particular. A channelizer extracts independent communication channels from a wideband signal, and is one of the most computationally expensive components in a communications receiver. This work specifically focuses on non-uniform channelizers suitable for multi-standard Software-Defined Radio (SDR) base stations in general and public mobile radio base stations in particular. A comprehensive evaluation of non-uniform channelizers (existing and developed during the course of this work) shows that parallel and recombined variants of the Generalised Discrete Fourier Transform Modulated Filter Bank (GDFT-FB) represent the best trade-off between computational load and flexibility for dynamic spectrum allocation. Nevertheless, for base station applications (with many channels) very high filter orders may be required, making the channelizers difficult to physically implement. To mitigate this problem, multi-stage filtering techniques are applied to the GDFT-FB. It is shown that these multi-stage designs can significantly reduce the filter orders and number of operations required by the GDFT-FB. An alternative approach, applying frequency response masking techniques to the GDFT-FB prototype filter design, leads to even bigger reductions in the number of coefficients, but computational load is only reduced for oversampled configurations and then not as much as for the multi-stage designs. Both techniques render the implementation of GDFT-FB based non-uniform channelizers more practical. Finally, channelization solutions for some real-world spectrum sharing use cases are developed before some final physical implementation issues are considered

Efficient Channelization for PMR+4G and GSM Re-Farming Base Stations

Current trends in mobile communications look for a better usage of the frequency spectrum by diverging from the classic frequency bands division for each standard. Instead, sharing a same frequency band by several mobile standards has been motivated by several factors: under-utilisation of some frequency bands, better electromagnetic propagation properties and provision of new capabilities to existing standards. This new way to manage the electromagnetic spectrum has an influence in the devices which form the mobile radio interface: base stations and mobiles stations. In particular for base stations, channelization represents an important challenge. In this paper efficient channelization techniques are proposed as a practical solution for real world professional and commercial mobile communication cases where frequency bands are shared. Depending on each case, the most optimal solution is based on the application of one of these channelization techniques, or a combination of several of them

Practical Non-Uniform Channelization for Multistandard Base Stations

A Multistandard software-defined radio base station must perform non-uniform channelization of multiplexed frequency bands. Non-uniform channelization accounts for a significant portion of the digital signal processing workload in the base station receiver and can be difficult to realize in a physical implementation. In non-uniform channelization methods based on generalized DFT filter banks, large prototype filter orders are a significant issue for implementation. In this paper, a multistage filter design is applied to two different non-uniform generalized DFT-based channelizers in order to reduce their filter orders. To evaluate the approach, a TETRA and TEDS base station is used. Experimental results show that the new multistage design reduces both the number of coefficients and operations and leads to a more feasible design and practical physical implementation

Practical Non-Uniform Channelization for Multistandard Base Stations

A Multistandard software-defined radio base station must perform non-uniform channelization of multiplexed frequency bands. Non-uniform channelization accounts for a significant portion of the digital signal processing workload in the base station receiver and can be difficult to realize in a physical implementation. In non-uniform channelization methods based on generalized DFT filter banks, large prototype filter orders are a significant issue for implementation. In this paper, a multistage filter design is applied to two different non-uniform generalized DFT-based channelizers in order to reduce their filter orders. To evaluate the approach, a TETRA and TEDS base station is used. Experimental results show that the new multistage design reduces both the number of coefficients and operations and leads to a more feasible design and practical physical implementation

BASEBAND RADIO MODEM DESIGN USING GRAPHICS PROCESSING UNITS

A modern radio or wireless communications transceiver is programmed via software and firmware to change its functionalities at the baseband. However, the actual implementation of the radio circuits relies on dedicated hardware, and the design and implementation of such devices are time consuming and challenging. Due to the need for real-time operation, dedicated hardware is preferred in order to meet stringent requirements on throughput and latency. With increasing need for higher throughput and shorter latency, while supporting increasing bandwidth across a fragmented spectrum, dedicated subsystems are developed in order to service individual frequency bands and specifications. Such a dedicated-hardware-intensive approach leads to high resource costs, including costs due to multiple instantiations of mixers, filters, and samplers. Such increases in hardware requirements in turn increases device size, power consumption, weight, and financial cost. If it can meet the required real-time constraints, a more flexible and reconfigurable design approach, such as a software-based solution, is often more desirable over a dedicated hardware solution. However, significant challenges must be overcome in order to meet constraints on throughput and latency while servicing different frequency bands and bandwidths. Graphics processing unit (GPU) technology provides a promising class of platforms for addressing these challenges. GPUs, which were originally designed for rendering images and video sequences, have been adapted as general purpose high-throughput computation engines for a wide variety of application areas beyond their original target domains. Linear algebra and signal processing acceleration are examples of such application areas. In this thesis, we apply GPUs as software-based, baseband radios and demonstrate novel, software-based implementations of key subsystems in modern wireless transceivers. In our work, we develop novel implementation techniques that allow communication system designers to use GPUs as accelerators for baseband processing functions, including real-time filtering and signal transformations. More specifically, we apply GPUs to accelerate several computationally-intensive, frontend radio subsystems, including filtering, signal mixing, sample rate conversion, and synchronization. These are critical subsystems that must operate in real-time to reliably receive waveforms. The contributions of this thesis can be broadly organized into 3 major areas: (1) channelization, (2) arbitrary resampling, and (3) synchronization. 1. Channelization: a wideband signal is shared between different users and channels, and a channelizer is used to separate the components of the shared signal in the different channels. A channelizer is often used as a pre-processing step in selecting a specific channel-of-interest. A typical channelization process involves signal conversion, resampling, and filtering to reject adjacent channels. We investigate GPU acceleration for a particularly efficient form of channelizer called a polyphase filterbank channelizer, and demonstrate a real-time implementation of our novel channelizer design. 2. Arbitrary resampling: following a channelization process, a signal is often resampled to at least twice the data rate in order to further condition the signal. Since different communication standards require different resampling ratios, it is desirable for a resampling subsystem to support a variety of different ratios. We investigate optimized, GPU-based methods for resampling using polyphase filter structures that are mapped efficiently into GPU hardware. We investigate these GPU implementation techniques in the context of interpolation (integer-factor increases in sampling rate), decimation (integer-factor decreases in sampling rate), and rational resampling. Finally, we demonstrate an efficient implementation of arbitrary resampling using GPUs. This implementation exploits specialized hardware units within the GPU to enable efficient and accurate resampling processes involving arbitrary changes in sample rate. 3. Synchronization: incoming signals in a wireless communications transceiver must be synchronized in order to recover the transmitted data properly from complex channel effects such as thermal noise, fading, and multipath propagation. We investigate timing recovery in GPUs to accelerate the most computationally intensive part of the synchronization process, and correctly align the incoming data symbols in the receiver. Furthermore, we implement fully-parallel timing error detection to accelerate maximum likelihood estimation

A farrow-structure-based multi-mode transmultiplexer

This paper introduces a multi-mode transmultiplexer (TMUX) consisting of Farrow-based variable integer sampling rate conversion (SRC) blocks. The polyphase components of general interpolation/ decimation filters are realized by the Farrow structure making it possible to achieve different linear-phase finite-length impulse response (FIR) lowpass filters at the cost of a fixed set of subfilters and adjustable fractional delay values. Simultaneous design of the subfilters, to achieve overall approximately Nyquist (Mth-band) filters, are treated in this paper. By means of an example, it is shown that the subfilters can be designed so that for any desired range of integer SRC ratios, the TMUX can approximate perfect recovery as close as desired.Original publication: Amir Eghbali, Håkan Johansson and Per Löwenborg, A farrow-structure-based multi-mode transmultiplexer, 2008, Proceedings of IEEE International Symposium on Circuits and Systems, Seattle, Washington, USA, May. 18-21, pp3114-3117. http://dx.doi.org/10.1109/ISCAS.2008.4542117. Copyright: IEEE, http://www.ieee.org</p