A BLE-based multi-gateway network infrastructure with handover support for mobile BLE peripherals

Bluetooth Low Energy (BLE) is a popular technology within the Internet of Things. It allows low-power, star networks to be set up between a BLE gateway and multiple, power-constrained BLE devices. However, these networks tend to be static, not supporting BLE devices that can freely move around in an environment of multiple interconnected BLE gateways and perform handovers whenever necessary. This work proposes two alternative network architectures for mobile BLE peripherals. One leverages on IPv6 over BLE, whereas the other combines default BLE mechanisms with an additional custom controller. On top, we study in detail the handover mechanism that must be present in both architectures and compare the performance of both a passive and active handover approach. The passive handover approach can be set up without any extra implementation, but an active handover approach offers more proactive handover decisions and can provide a much lower handover latency. All proposed solutions have been implemented and validated on real hardware, showing the feasibility of having future infrastructures with support for mobile BLE devices

Fog-Driven Context-Aware Architecture for Node Discovery and Energy Saving Strategy for Internet of Things Environments

The consolidation of the Fog Computing paradigm and the ever-increasing diffusion of Internet of Things (IoT) and smart objects are paving the way toward new integrated solutions to efficiently provide services via short-mid range wireless connectivity. Being the most of the nodes mobile, the node discovery process assumes a crucial role for service seekers and providers, especially in IoT-fog environments where most of the devices run on battery. This paper proposes an original model and a fog-driven architecture for efficient node discovery in IoT environments. Our novel architecture exploits the location awareness provided by the fog paradigm to significantly reduce the power drain of the default baseline IoT discovery process. To this purpose, we propose a deterministic and competitive adaptive strategy to dynamically adjust our energy-saving techniques by deciding when to switch BLE interfaces ON/OFF based on the expected frequency of node approaching. Finally, the paper presents a thorough performance assessment that confirms the applicability of the proposed solution in several different applications scenarios. This evaluation aims also to highlight the impact of the nodes' dynamic arrival on discovery process performance

PSM-DMO: power save mode and discontinuous BLE mesh operation

The Bluetooth Low Energy (BLE) mesh profile, standardized by the Bluetooth Special Interest Group (SIG), has an increasing interest in IoT solutions. However, the standard assumes that relay and friend nodes should be continuously scanning the channel awaiting any incoming transmissions. This could be very inefficient in terms of energy consumption, particularly in application scenarios where the backbone of the mesh network cannot be powered and traffic is infrequent. Hence, we present a novel strategy, named PSM-DMO, that minimizes the scan periods and thus, significantly reduces the overall energy consumption of the mesh network. PSM-DMO is defined as a new and optional feature for the currently published BLE mesh specifications, coexists with the standard operation, and is implemented without modifying the core of the specification. The proposal, that ensures the reliability of the mesh operation, can be used in BLE sensor networks that can tolerate a certain transmission delay. PSM-DMO replaces the continuous scan by a periodic but asynchronous polling process whereby the relay and sink nodes interrogate their neighbors about the existence of data to receive or to retransmit through the network. Nodes only go into scan mode during the period of time the mesh network will be involved in the transmission and dissemination. This period is estimated by the node which is the source of data, it is announced to its neighbors and it is propagated consecutively by all the relay nodes until the destination. PSM-DMO allows a theoretical reduction in the energy consumption of relay nodes up to 99.24 %.This work has been supported in part by the Spanish Ministry of Science through the projects RTI2018-099880-B-C32. RTI2018-095684-B-I00 and RTI2018-099063-B-I00 with ERFD funds, and by the Government of Aragon (Reference Group T31_20R).Peer ReviewedPostprint (published version

PSM-DMO: power save mode and discontinuous BLE mesh operation

The Bluetooth Low Energy (BLE) mesh profile, standardized by the Bluetooth Special Interest Group (SIG), has an increasing interest in IoT solutions. However, the standard assumes that relay and friend nodes should be continuously scanning the channel awaiting any incoming transmissions. This could be very inefficient in terms of energy consumption, particularly in application scenarios where the backbone of the mesh network cannot be powered and traffic is infrequent. Hence, we present a novel strategy, named PSM-DMO, that minimizes the scan periods and thus, significantly reduces the overall energy consumption of the mesh network. PSM-DMO is defined as a new and optional feature for the currently published BLE mesh specifications, coexists with the standard operation, and is implemented without modifying the core of the specification. The proposal, that ensures the reliability of the mesh operation, can be used in BLE sensor networks that can tolerate a certain transmission delay. PSM-DMO replaces the continuous scan by a periodic but asynchronous polling process whereby the relay and sink nodes interrogate their neighbors about the existence of data to receive or to retransmit through the network. Nodes only go into scan mode during the period of time the mesh network will be involved in the transmission and dissemination. This period is estimated by the node which is the source of data, it is announced to its neighbors and it is propagated consecutively by all the relay nodes until the destination. PSM-DMO allows a theoretical reduction in the energy consumption of relay nodes up to 99.24 %

Anti-Collision Adaptations of BLE Active Scanning for Dense IoT Tracking Applications

Bluetooth low energy (BLE) is one of most promising technologies to enable the Internet-of-Things (IoT) paradigm. The BLE neighbor discovery process (NDP) based on active scanning may be the core of multiple IoT applications in which a large and varying number of users/devices/tags must be detected in a short period of time. Minimizing the discovery latency and maximizing the number of devices that can be discovered in a limited time are challenging issues due to collisions between frames sent by advertisers and scanners. The mechanism for resolution of collisions between scanners has a great impact on the achieved performance, but backoff in NDP has been poorly studied so far. This paper includes a detailed analysis of backoff in NDP, identifies and studies the factors involved in the process, reveals the limitations and problems presented by the algorithm suggested by the specifications and proposes simple and practical adaptations on scanner functionality. They are easily compatible with the current definitions of the standard, which together with a new proposal for the backoff scheme, may significantly improve the discovery latencies and, thus, the probability of discovering a large number of devices in high density scenarios

QoS enabled heterogeneous BLE mesh networks

Bluetooth Low Energy (BLE) is a widely known short-range wireless technology used for various Internet of Things (IoT) applications. Recently, with the introduction of BLE mesh networks, this short-range barrier of BLE has been overcome. However, the added advantage of an extended range can come at the cost of a lower performance of these networks in terms of latency, throughput and reliability, as the core operation of BLE mesh is based on advertising and packet flooding. Hence, efficient management of the system is required to achieve a good performance of these networks and a smoother functioning in dense scenarios. As the number of configuration points in a standard mesh network is limited, this paper describes a novel set of standard compliant Quality of Service (QoS) extensions for BLE mesh networks. The resulting QoS features enable better traffic management in the mesh network, providing sufficient redundancy to achieve reliability whilst avoiding unnecessary packet flooding to reduce collisions, as well as the prioritization of certain traffic flows and the ability to control end-to-end latencies. The QoS-based system has been implemented and validated in a small-scale BLE mesh network and compared against a setup without any QoS support. The assessment in a small-scale test setup confirms that applying our QoS features can enhance these types of non-scheduled and random access networks in a significant way