On Detection and Ranking Methods for a Distributed Radio-Frequency Sensor Network: Theory and Algorithmic Implementation

A theoretical foundation for pre-detection fusion of sensors is needed if the United States Air Force is to ever field a system of distributed and layered sensors that can detect and perform parameter estimation of complex, extended targets in difficult interference environments, without human intervention, in near real-time. This research is relevant to the United States Air Force within its layered sensing and cognitive radar/sensor initiatives. The asymmetric threat of the twenty-first century introduces stressing sensing conditions that may exceed the ability of traditional monostatic sensing systems to perform their required intelligence, surveillance and reconnaissance missions. In particular, there is growing interest within the United States Air Force to move beyond single sensor sensing systems, and instead begin fielding and leveraging distributed sensing systems to overcome the inherent challenges imposed by the modern threat space. This thesis seeks to analyze the impact of integrating target echoes in the angular domain, to determine if better detection and ranking performance is achieved through the use of a distributed sensor network. Bespoke algorithms are introduced for detection and ranking ISR missions leveraging a distributed network of radio-frequency sensors: the first set of bespoke algorithms area based upon a depth-based nonparametric detection algorithm, which is to shown to enhance the recovery of targets under lower signal-to-noise ratios than an equivalent monostatic radar system; the second set of bespoke algorithms are based upon random matrix theoretic and concentration of measure mathematics, and demonstrated to outperform the depth-based nonparametric approach. This latter approach shall be shown to be effective across a broad range of signal-to-noise ratios, both positive and negative

Adaptive MIMO Radar for Target Detection, Estimation, and Tracking

We develop and analyze signal processing algorithms to detect, estimate, and track targets using multiple-input multiple-output: MIMO) radar systems. MIMO radar systems have attracted much attention in the recent past due to the additional degrees of freedom they offer. They are commonly used in two different antenna configurations: widely-separated: distributed) and colocated. Distributed MIMO radar exploits spatial diversity by utilizing multiple uncorrelated looks at the target. Colocated MIMO radar systems offer performance improvement by exploiting waveform diversity. Each antenna has the freedom to transmit a waveform that is different from the waveforms of the other transmitters. First, we propose a radar system that combines the advantages of distributed MIMO radar and fully polarimetric radar. We develop the signal model for this system and analyze the performance of the optimal Neyman-Pearson detector by obtaining approximate expressions for the probabilities of detection and false alarm. Using these expressions, we adaptively design the transmit waveform polarizations that optimize the target detection performance. Conventional radar design approaches do not consider the goal of the target itself, which always tries to reduce its detectability. We propose to incorporate this knowledge about the goal of the target while solving the polarimetric MIMO radar design problem by formulating it as a game between the target and the radar design engineer. Unlike conventional methods, this game-theoretic design does not require target parameter estimation from large amounts of training data. Our approach is generic and can be applied to other radar design problems also. Next, we propose a distributed MIMO radar system that employs monopulse processing, and develop an algorithm for tracking a moving target using this system. We electronically generate two beams at each receiver and use them for computing the local estimates. Later, we efficiently combine the information present in these local estimates, using the instantaneous signal energies at each receiver to keep track of the target. Finally, we develop multiple-target estimation algorithms for both distributed and colocated MIMO radar by exploiting the inherent sparsity on the delay-Doppler plane. We propose a new performance metric that naturally fits into this multiple target scenario and develop an adaptive optimal energy allocation mechanism. We employ compressive sensing to perform accurate estimation from far fewer samples than the Nyquist rate. For colocated MIMO radar, we transmit frequency-hopping codes to exploit the frequency diversity. We derive an analytical expression for the block coherence measure of the dictionary matrix and design an optimal code matrix using this expression. Additionally, we also transmit ultra wideband noise waveforms that improve the system resolution and provide a low probability of intercept: LPI)

Target Detection Architecture for Resource Constrained Wireless Sensor Networks within Internet of Things

Wireless sensor networks (WSN) within Internet of Things (IoT) have the potential to address the growing detection and classi�cation requirements among many surveillance applications. RF sensing techniques are the next generation technologies which o�er distinct advantages over traditional passive means of sensing such as acoustic and seismic which are used for surveillance and target detection applications of WSN. RF sensing based WSN within IoT detect the presence of designated targets by transmitting RF signals into the sensing environment and observing the re ected echoes. In this thesis, an RF sensing based target detection architecture for surveillance applications of WSN has been proposed to detect the presence of stationary targets within the sensing environment. With multiple sensing nodes operating simultaneously within the sensing region, diversity among the sensing nodes in the choice of transmit waveforms is required. Existing multiple access techniques to accommodate multiple sensing nodes within the sensing environment are not suitable for RF sensing based WSN. In this thesis, a diversity in the choice of the transmit waveforms has been proposed and transmit waveforms which are suitable for RF sensing based WSN have been discussed. A criterion have been de�ned to quantify the ease of detecting the signal and energy e�ciency of the signal based on which ease of detection index and energy e�ciency index respectively have been generated. The waveform selection criterion proposed in this thesis takes the WSN sensing conditions into account and identi�es the optimum transmit waveform within the available choices of transmit waveforms based on their respective ease of detection and energy e�ciency indexes. A target detector analyses the received RF signals to make a decision regarding the existence or absence of targets within the sensing region. Existing target detectors which are discussed in the context of WSN do not take the factors such as interference and nature of the sensing environment into account. Depending on the nature of the sensing environment, in this thesis the sensing environments are classi�ed as homogeneous and heterogeneous sensing environments. Within homogeneous sensing environments the presence of interference from the neighbouring sensing nodes is assumed. A target detector has been proposed for WSN within homogeneous sensing environments which can reliably detect the presence of targets. Within heterogeneous sensing environments the presence of clutter and interfering waveforms is assumed. A target detector has been proposed for WSN within heterogeneous sensing environments to detect targets in the presence of clutter and interfering waveforms. A clutter estimation technique has been proposed to assist the proposed target detector to achieve increased target detection reliability in the presence of clutter. A combination of compressive and two-step target detection architectures has been proposed to reduce the transmission costs. Finally, a 2-stage target detection architecture has been proposed to reduce the computational complexity of the proposed target detection architecture

Signal Processing and Propagation for Aeroacoustic Sensor Networking,” Ch

Passive sensing of acoustic sources is attractive in many respects, including the relatively low signal bandwidth of sound waves, the loudness of most sources of interest, and the inherent difficulty of disguising or concealing emitted acoustic signals. The availability of inexpensive, low-power sensing and signal-processing hardware enables application of sophisticated real-time signal processing. Among th

A Unified Performance Framework for Integrated Sensing-Communications based on KL-Divergence

The need for integrated sensing and communication (ISAC) services has significantly increased in the last few years. This integration imposes serious challenges such as joint system design, resource allocation, optimization, and analysis. Since sensing and telecommunication systems have different approaches for performance evaluation, introducing a unified performance measure which provides a perception about the quality of sensing and telecommunication is very beneficial. To this end, this paper provides performance analysis for ISAC systems based on the information theoretical framework of the Kullback-Leibler divergence (KLD). The considered system model consists of a multiple-input-multiple-output (MIMO) base-station (BS) providing ISAC services to multiple communication user equipments (CUEs) and targets (or sensing-served users). The KLD framework allows for a unified evaluation of the error rate performance of CUEs, and the detection performance of the targets. The relation between the detection capability for the targets and error rate of CUEs on one hand, and the proposed KLD on the other hand is illustrated analytically. Theoretical results corroborated by simulations show that the derived KLD is very accurate and can perfectly characterize both subsystems, namely the communication and radar subsystems

Pipeline health monitoring

Worldwide, BP operates many thousand kilometres of pipelines carrying valuable yet toxic and corrosive fluids. The structural integrity of these pipelines is crucial, as any failure may result in environmental damage, economic losses and injuries to personnel. Convention- ally, pipeline integrity is assessed on a time basis. This inherently limits the amount of infor- mation available about its structural health, as any damage which develops in unexpected circumstances or while the pipeline is not being inspected may remain undetected. Such lack of information hinders the reliability of any prognosis and of Risk-Based Inspection and Maintenance strategies, increases the risk of unexpected critical damage development and pipeline failure, and forces the use of costly time-based maintenance, following the safe-life design approach. Conversely, if sufficient information about pipeline integrity were avail- able to produce reliable prognoses, then it would become possible to dramatically reduce the risk of unexpected failures and to utilise cost-efficient condition-based maintenance, which prescribes the replacement of a pipeline only when it is about to suffer critical dam- age and has therefore reached the actual end of its operational life. In this way, pipeline networks would become safer and more reliable while at the same time more productive and less costly. This thesis introduces and demonstrates a Structural Health Monitoring ap- proach that has the potential to fill the integrity information gap and ultimately enable the use of condition-based pipeline maintenance. This approach, embodied by a practical au- tomated pipeline damage detection procedure, complements permanently installed guided wave sensors to create a complete pipeline health monitoring solution. Utilising experimen- tal data from a permanently installed guided wave sensor installed on a purpose-built NPS 8 Schedule 40 pipe loop facility at BP’s Naperville Campus, it is shown that the procedure is very effective at detecting and quantifying actual damage, thereby achieving the intended aim of this thesis.Open Acces

Multistatic radar optimization for radar sensor network applications

The design of radar sensor networks (RSN) has undergone great advancements in recent years. In fact, this kind of system is characterized by a high degree of design flexibility due to the multiplicity of radar nodes and data fusion approaches. This thesis focuses on the development and analysis of RSN architectures to optimize target detection and positioning performances. A special focus is placed upon distributed (statistical) multiple-input multipleoutput (MIMO) RSN systems, where spatial diversity could be leveraged to enhance radar target detection capabilities. In the first part of this thesis, the spatial diversity is leveraged in conjunction with cognitive waveform selection and design techniques to quickly adapt to target scene variations in real time. In the second part, we investigate the impact of RSN geometry, particularly the placement of multistatic radar receivers, on target positioning accuracy. We develop a framework based on cognitive waveform selection in conjunction with adaptive receiver placement strategy to cope with time-varying target scattering characteristics and clutter distribution parameters in the dynamic radar scene. The proposed approach yields better target detection performance and positioning accuracy as compared with conventional methods based on static transmission or stationary multistatic radar topology. The third part of this thesis examines joint radar and communication systems coexistence and operation via two possible architectures. In the first one, several communication nodes in a network operate separately in frequency. Each node leverages the multi-look diversity of the distributed system by activating radar processing on multiple received bistatic streams at each node level in addition to the pre-existing monostatic processing. This architecture is based on the fact that the communication signal, such as the Orthogonal Frequency Division Multiplexing (OFDM) waveform, could be well-suited for radar tasks if the proper waveform parameters are chosen so as to simultaneously perform communication and radar tasks. The advantage of using a joint waveform for both applications is a permanent availability of radar and communication functions via a better use of the occupied spectrum inside the same joint hardware platform. We then examine the second main architecture, which is more complex and deals with separate radar and communication entities with a partial or total spectrum sharing constraint. We investigate the optimum placement of radar receivers for better target positioning accuracy while reducing the radar measurement errors by minimizing the interference caused by simultaneous operation of the communication system. Better performance in terms of communication interference handling and suppression at the radar level, were obtained with the proposed placement approach of radar receivers compared to the geometric dilution of precision (GDOP)-only minimization metric