228 research outputs found
Realistic tool-tissue interaction models for surgical simulation and planning
Surgical simulators present a safe and potentially effective method for surgical training, and can also be used in pre- and intra-operative surgical planning. Realistic modeling of medical interventions involving tool-tissue interactions has been considered to be a key requirement in the development of high-fidelity simulators and planners. The soft-tissue constitutive laws, organ geometry and boundary conditions imposed by the connective tissues surrounding the organ, and the shape of the surgical tool interacting with the organ are some of the factors that govern the accuracy of medical intervention planning.\ud
\ud
This thesis is divided into three parts. First, we compare the accuracy of linear and nonlinear constitutive laws for tissue. An important consequence of nonlinear models is the Poynting effect, in which shearing of tissue results in normal force; this effect is not seen in a linear elastic model. The magnitude of the normal force for myocardial tissue is shown to be larger than the human contact force discrimination threshold. Further, in order to investigate and quantify the role of the Poynting effect on material discrimination, we perform a multidimensional scaling study. Second, we consider the effects of organ geometry and boundary constraints in needle path planning. Using medical images and tissue mechanical properties, we develop a model of the prostate and surrounding organs. We show that, for needle procedures such as biopsy or brachytherapy, organ geometry and boundary constraints have more impact on target motion than tissue material parameters. Finally, we investigate the effects surgical tool shape on the accuracy of medical intervention planning. We consider the specific case of robotic needle steering, in which asymmetry of a bevel-tip needle results in the needle naturally bending when it is inserted into soft tissue. We present an analytical and finite element (FE) model for the loads developed at the bevel tip during needle-tissue interaction. The analytical model explains trends observed in the experiments. We incorporated physical parameters (rupture toughness and nonlinear material elasticity) into the FE model that included both contact and cohesive zone models to simulate tissue cleavage. The model shows that the tip forces are sensitive to the rupture toughness. In order to model the mechanics of deflection of the needle, we use an energy-based formulation that incorporates tissue-specific parameters such as rupture toughness, nonlinear material elasticity, and interaction stiffness, and needle geometric and material properties. Simulation results follow similar trends (deflection and radius of curvature) to those observed in macroscopic experimental studies of a robot-driven needle interacting with gels
Creative design and modelling of large-range translation compliant parallel manipulators
Compliant parallel mechanisms/manipulators (CPMs) are parallel manipulators that
transmit motion/load by deformation of their compliant members. Due to their merits
such as the eliminated backlash and friction, no need for lubrication, reduced wear and
noise, and monolithic configuration, they have been used in many emerging
applications as scanning tables, bio-cell injectors, nano-positioners, and etc.
How to design large-range CPMs is still a challenging issue. To meet the needs for
large-range translational CPMs for high-precision motion stages, this thesis focuses on
the systematic conceptual design and modelling of large-range translational CPMs with
distributed-compliance.
Firstly, several compliant parallel modules with distributed-compliance, such as
spatial multi-beam modules, are identified as building blocks of translational CPMs. A
normalized, nonlinear and analytical model is then derived for the spatial multi-beam
modules to address the non-linearity of load-equilibrium equations. Secondly, a new
design methodology for translational CPMs is presented. The main characteristic of the
proposed design approach is not only to replace kinematic joints as in the literature, but
also to replace kinematic chains with appropriate multiple degrees-of-freedom (DOF)
compliant parallel modules. Thirdly, novel large-range translational CPMs are
constructed using the proposed design methodology and identified compliant parallel
modules. The proposed novel CPMs include, for example, a 1-DOF compliant parallel
gripper with auto-adaptive grasping function, a stiffness-enhanced XY CPM with a
spatial compliant leg, and an improved modular XYZ CPM using identical spatial
double four-beam modules. Especially, the proposed XY CPM and XYZ CPM can
achieve a 10mm’s motion range along each axis in the case studies. Finally,
kinematostatic modelling of the proposed translational CPMs is presented to enable
rapid performance characteristic analysis. The proposed analytical models are also
compared with finite element analysis
Commande dynamique de robots déformables basée sur un modèle numérique
This work focuses on modeling and control of soft robots. It covers the entire development of the controller, from the modeling step to the practical experimental validation.From a theoretical point a view, large-scale dynamical systems along with model reduction algorithms are studied. In addition to the theoretical studies, different experimental setups are used to illustrate the results. A cable-driven soft robot and a pressurized soft arm are used to test the control algorithms. Through these different setups, we show that the method can handle different types of actuation, different geometries and mechanical properties. This emphasizes one of the interests of the method, its genericity.Cette thèse s'intéresse à la modélisation et à la commande de robots déformables (robots dont le mouvement se fait par déformation). Nous nous intéressons à la conception de lois de contrôle en boucle fermée répondant aux besoins spécifiques du contrôle dynamique de ces robots, sans restrictions fortes sur leur géométrie. La résolution de ce défi soulève des questions théoriques qui nous amènent au deuxième objectif de cette thèse: développer de nouvelles stratégies pour étudier les systèmes de grandes dimensions
Technology 2000, volume 1
The purpose of the conference was to increase awareness of existing NASA developed technologies that are available for immediate use in the development of new products and processes, and to lay the groundwork for the effective utilization of emerging technologies. There were sessions on the following: Computer technology and software engineering; Human factors engineering and life sciences; Information and data management; Material sciences; Manufacturing and fabrication technology; Power, energy, and control systems; Robotics; Sensors and measurement technology; Artificial intelligence; Environmental technology; Optics and communications; and Superconductivity
2015-16 Graduate Bulletin
After 2003 the University of Dayton Bulletin went exclusively online. This copy was downloaded from the University of Dayton\u27s website in March of 2018. Please note: Even though this copy says draft it is the final copy.https://ecommons.udayton.edu/bulletin_grad/1046/thumbnail.jp
- …