234 research outputs found
Hybrid memristor-CMOS implementation of logic gates design using LTSpice
In this paper, a hybrid memristor-CMOS implementation of logic gates simulated using LTSpice. Memristors' implementation in computer architecture designs explored in various design structures proposed by researchers from all around the world. However, all prior designs have some drawbacks in terms of applicability, scalability, and performance. In this research, logic gates design based on the hybrid memristor-CMOS structure presented. 2-inputs AND, OR, NAND, NOR, XOR, and XNOR are demonstrated with minimum components requirements. In addition, a 1-bit full adder circuit with high performance and low area consumption is also proposed. The proposed full adder only consists of 4 memristors and 7 CMOS transistors. Half design of the adder base on the memristor component created. Through analysis and simulations, the memristor implementation on designing logic gates using memristor-CMOS structure demonstrated using the generalized metastable switch memristor (MSS) model and LTSpice. In conclusion, the proposed approach improves speed and require less area
Memcapacitive Devices in Logic and Crossbar Applications
Over the last decade, memristive devices have been widely adopted in
computing for various conventional and unconventional applications. While the
integration density, memory property, and nonlinear characteristics have many
benefits, reducing the energy consumption is limited by the resistive nature of
the devices. Memcapacitors would address that limitation while still having all
the benefits of memristors. Recent work has shown that with adjusted parameters
during the fabrication process, a metal-oxide device can indeed exhibit a
memcapacitive behavior. We introduce novel memcapacitive logic gates and
memcapacitive crossbar classifiers as a proof of concept that such applications
can outperform memristor-based architectures. The results illustrate that,
compared to memristive logic gates, our memcapacitive gates consume about 7x
less power. The memcapacitive crossbar classifier achieves similar
classification performance but reduces the power consumption by a factor of
about 1,500x for the MNIST dataset and a factor of about 1,000x for the
CIFAR-10 dataset compared to a memristive crossbar. Our simulation results
demonstrate that memcapacitive devices have great potential for both Boolean
logic and analog low-power applications
Quantum autoencoders via quantum adders with genetic algorithms
The quantum autoencoder is a recent paradigm in the field of quantum machine
learning, which may enable an enhanced use of resources in quantum
technologies. To this end, quantum neural networks with less nodes in the inner
than in the outer layers were considered. Here, we propose a useful connection
between approximate quantum adders and quantum autoencoders. Specifically, this
link allows us to employ optimized approximate quantum adders, obtained with
genetic algorithms, for the implementation of quantum autoencoders for a
variety of initial states. Furthermore, we can also directly optimize the
quantum autoencoders via genetic algorithms. Our approach opens a different
path for the design of quantum autoencoders in controllable quantum platforms
Optimized Implementation of Memristor-Based Full Adder by Material Implication Logic
Recently memristor-based applications and circuits are receiving an increased
attention. Furthermore, memristors are also applied in logic circuit design.
Material implication logic is one of the main areas with memristors. In this
paper an optimized memristor-based full adder design by material implication
logic is presented. This design needs 27 memristors and less area in comparison
with typical CMOS-based 8-bit full adders. Also the presented full adder needs
only 184 computational steps which enhance former full adder design speed by 20
percent.Comment: International Conference on Electronics Circuits and Systems (ICECS),
201
Recommended from our members
Memristor logic design using driver circuitry
A new lower-power gate design for memristor-based Boolean operations. Such a design offers a uniform cell that is configurable to perform all Boolean operations, including the XOR operation. For example, a circuit to perform the AND operation utilizes a first memristor and a second memristor connected in series. The circuit further includes a switch, where a node of the second memristor is connected to the switch. Furthermore, the circuit includes a third memristor connected to the switch in series, where the switch and the third memristor are connected in parallel to the first and second memristors. Additionally, the first voltage source is connected to the first memristor via a first resistor. In addition, a second voltage source is connected in series to the switch and the third memristor. In such a design, the delay is reduced to a single step and the area is reduced to at most 3 memristors.Board of Regents, University of Texas Syste
In-Memory Computing by Using Nano-ionic Memristive Devices
By reaching to the CMOS scaling limitation based on the Moore’s law and due to the increasing disparity between the processing units and memory performance, the quest is continued to find a suitable alternative to replace the conventional technology. The recently discovered two terminal element, memristor, is believed to be one of the most promising candidates for future very large scale integrated systems. This thesis is comprised of two main parts, (Part I) modeling the memristor devices, and (Part II) memristive computing. The first part is presented in one chapter and the second part of the thesis contains five chapters. The basics and fundamentals regarding the memristor functionality and memristive computing are presented in the introduction chapter. A brief detail of these two main parts is as follows: Part I: Modeling- This part presents an accurate model based on the charge transport mechanisms for nanoionic memristor devices. The main current mechanism in metal/insulator/metal (MIM) structures are assessed, a physic-based model is proposed and a SPICE model is presented and tested for four different fabricated devices. An accuracy comparison is done for various models for Ag/TiO2/ITO fabricated device. Also, the functionality of the model is tested for various input signals. Part II: Memristive computing- Memristive computing is about utilizing memristor to perform computational tasks. This part of the thesis is divided into neuromorphic, analog and digital computing schemes with memristor devices. – Neuromorphic computing- Two chapters of this thesis are about biologicalinspired memristive neural networks using STDP-based learning mechanism. The memristive implementation of two well-known spiking neuron models, Hudgkin-Huxley and Morris-Lecar, are assessed and utilized in the proposed memristive network. The synaptic connections are also memristor devices in this design. Unsupervised pattern classification tasks are done to ensure the right functionality of the system. – Analog computing- Memristor has analog memory property as it can be programmed to different memristance values. A novel memristive analog adder is designed by Continuous Valued Number System (CVNS) scheme and its circuit is comprised of addition and modulo blocks. The proposed analog adder design is explained and its functionality is tested for various numbers. It is shown that the CVNS scheme is compatible with memristive design and the environment resolution can be adjusted by the memristance ratio of the memristor devices. – Digital computing- Two chapters are dedicated for digital computing. In the first one, a development over IMPLY-based logic with memristor is provided to implement a 4:2 compressor circuit. In the second chapter, A novel resistive over a novel mirrored memristive crossbar platform. Different logic gates are designed with the proposed memristive logic method and the simulations are provided with Cadence to prove the functionality of the logic. The logic implementation over a mirrored memristive crossbars is also assessed
- …