OPEN PON: Seamless integration between 5G core and optical access networks

Nowadays business and users traffic demands are getting higher and higher, leaving optical fiber as the only reliable solution to meet its demands, and in access networks the dominating technology is Passive Optical Networks (PONs) where currently exists two main families of standards, the GPON (ITU-T standard) and the EPON (IEEE standard). In this work we tackle the latest version oof the GPON family, the NG-PON2. We analyse the Physical Media Dependent (PMD) and Transmission Convergence (TC) layer requirements and what is standardized in each one. We also have a look into the SDN paradigm, which decouples the control and data plane of network equipment concentrating the intellegence and complexity in a centralized controller, the OpenFlow protocol that is one of the main enablers of SDN, since it is the communication protocol betwwen the network devices and the SDN controller, and the SIEPON (IEEE 1904.1) standard which gives interoperability of the transport, service, and control planes in a multi-vendor environment. The introduction of the SDN paradigm in the xPON world is a hot research topic because it would add the total controllability of the PON infrastructure, and the coordination with the SDN-based control plane of the core networks. It would allow a centralized optimization of the different resources managed by the OLTs and a seamless coordination between OLTs and the core network. In the TC layer specifications, of NG-PON2, it is not standardized the bandwidth allocation of the system, we set ourselves to create a simple Dynamic Bandwidth Allocation (DBA) algorithm that would optimize the use of channels and wavelengths. Taking into account the NG-PON2 technology and all its features, the emerging trend to extend SDN to the optical access networks, the multi-vendor adaptation provided by the SIEPON stantdard, and the need to have a platform to develop and test DBA scheduling algorithms made that thecreation and deployment of a fully SIEPON-SDN-NG-PON2 emulation environment became the main goal of this work. To create this environment we employed the use of MikroTiks, where OpenWRT was installed as well as a set of packages that menabled the behaviour of a CPqD switch (or ofsoftswitch13), and the use of Raspberry Pis which maintained its original OS and only required the installation of a sepecific set of tools. The results obtained were quite positive confirming the possibility of not only creating but also testing different DBA scheduling algorithms in the deployed environment and matching the results expected to our created algorithm

Enabling Optical Wired and Wireless Technologies for 5G and Beyond Networks

The emerging fifth-generation mobile communications are envisaged to support massive number of deployment scenarios based on the respective use case requirements. The requirements can be efficiently attended with ultradense small-cell cloud radio access network (C-RAN) approach. However, the C-RAN architecture imposes stringent requirements on the transport networks. This book chapter presents high-capacity and low-latency optical wired and wireless networking solutions that are capable of attending to the network demands. Meanwhile, with optical communication evolutions, there has been advent of enhanced photonic integrated circuits (PICs). The PICs are capable of offering advantages such as low-power consumption, high-mechanical stability, low footprint, small dimension, enhanced functionalities, and ease of complex system architectures. Consequently, we exploit the PICs capabilities in designing and developing the physical layer architecture of the second standard of the next-generation passive optical network (NG-PON2) system. Apart from being capable of alleviating the associated losses of the transceiver, the proposed architectures aid in increasing the system power budget. Moreover, its implementation can significantly help in reducing the optical-electrical-optical conversions issue and the required number of optical connections, which are part of the main problems being faced in the miniaturization of network elements. Additionally, we present simulation results for the model validation

Supporting Diverse Customers and Prioritized Traffic in Next-Generation Passive Optical Networks

The already high demand for more bandwidth usage has been growing rapidly. Access network traffic is usually bursty in nature and the present traffic trend is mostly video-dominant. This motivates the need for higher transmission rates in the system. At the same time, the deployment costs and maintenance expenditures have to be reasonable. Therefore, Passive Optical Networks (PON) are considered promising next-generation access technologies. As the existing PON standards are not suitable to support future-PON services and applications, the FSAN (Full Service Access Network) group and the ITU-T (Telecommunication Standardization Sector of the International Telecommunication Union) have worked on developing the NG- PON2 (Next Generation PON 2) standard. Resource allocation is a fundamental task in any PON and it is necessary to have an efficient scheme that reduces delay, maximizes bandwidth usage, and minimizes the resource wastage. A variety of DBA (Dynamic Bandwidth Allocation) and DWBA (Dynamic Wavelength and Bandwidth Allocation) algorithms have been proposed which are based on different PONs (e.g. EPON, GPON, XG-PON, 10G- EPON, etc.). But to our knowledge, no DWBA scheme for NG-PON2 system, with diverse customers and prioritized traffic, has been proposed yet. In this work, this problem is addressed and five different dynamic wavelength and bandwidth allocation (DWBA) schemes are proposed. First, mixed integer linear programming (MILP) models are developed to minimize the total delay of the high priority data. Due to the MILP’s high computational complexity, heuristic algorithms are developed based on the MILP model insights. The five heuristics algorithms are: No Block-Split Heuristic (NBH), Equal Block-Split Heuristic (EBH), Priority Based No Block-Split Heuristic (P-NBH), Priority Based Equal Block-Split Heuristic (P-EBH), and Priority Based Decider Block-Split Heuristic (P-DBH). Six priority classes of requests are introduced with the goal of minimizing the total delay for the high priority data and to lessen the bandwidth wastage of the system. Finally, experiments for the performance evaluation of the five DWBA schemes are conducted. The results show that P-NBH, P-EBH, P-DBH schemes show a 47.63% less delay and 30% of less bandwidth wastage on average for the highest priority data transmission than the schemes without priority support (NBH and EBH). Among these five schemes, NBH method has the highest delay, whereas EBH and P-EBH waste more bandwidth than the other schemes. P-DBH is the most efficient among the five because this scheme offers the lowest delay for high priority data and the minimum bandwidth wastage for lower priority ones. Adviser: Byrav Ramamurth

Telecommunication Systems

This book is based on both industrial and academic research efforts in which a number of recent advancements and rare insights into telecommunication systems are well presented. The volume is organized into four parts: "Telecommunication Protocol, Optimization, and Security Frameworks", "Next-Generation Optical Access Technologies", "Convergence of Wireless-Optical Networks" and "Advanced Relay and Antenna Systems for Smart Networks." Chapters within these parts are self-contained and cross-referenced to facilitate further study

FTTx Access Networks: Technical Developments and Standardization

This chapter provides a review of factors driving technical development of broadband access networks, mostly toward higher bit rates and symmetrical services, together with a review of “fiber to the x” (FTTx) technologies for fixed access networks, including development and performance limitations of digital subscriber line (DSL) systems using twisted-pair copper cables, as well as fiber to the home systems. Characteristics and standardization of these systems are presented, together with a review of the two main competing broadband technologies: Data over cable service interface specification (DOCSIS) in coaxial cable TV networks and the 4G and 5G wireless networks. Additionally, a short list of recent developments in passive technologies (fibers, cables, and connectors) is included. Finally, the issues related to dismantling of the traditional copper telephone network and ensuring continuity of voice services in emergency situations are analyzed

Design of time division multiplexing/wavelength division multiplexing passive optical network system for high-capacity network

This paper presents the design of time division multiplexing-wavelength division multiplexing-passive optical network (TDM-WDM PON). In this design, the current TDM PON is incorporated with the proposed WDM-PON in order to design a high-capacity network with lower loss requirements. The design has been simulated using OptiSystem software. The upstream wavelength for WDM is between 1,530.334 to 1,542.142 nm while for TDM is 1,310 nm. The downstream wavelength for WDM is from 1,569.865 to 1,581.973 nm, while for TDM is 1,490 nm. Based on the result, it is found that the proposed network is capable to support up to 64 customers with a bit rate of 2.5 Gbps

Analog radio over fiber solutions for multi-band 5g systems

This study presents radio over fiber (RoF) solutions for the fifth-generation (5G) of wireless networks. After the state of the art and a technical background review, four main contributions are reported. The first one is proposing and investigating a RoF technique based on a dual-drive Mach-Zehnder modulator (DD-MZM) for multi-band mobile fronthauls, in which two radiofrequency (RF) signals in the predicted 5G bands individually feed an arm of the optical modulator. Experimental results demonstrate the approach enhances the RF interference mitigation and can prevail over traditional methods. The second contribution comprises the integration of a 5G transceiver, previously developed by our group, in a passive optical network (PON) using RoF technology and wavelength division multiplexing (WDM) overlay. The proposed architecture innovates by employing DD-MZM and enables to simultaneously transport baseband and 5G candidate RF signals in the same PON infrastructure. The proof-of-concept includes the transmission of a generalized frequency division multiplexing (GFDM) signal generated by the 5G transceiver in the 700 MHz band, a 26 GHz digitally modulated signal as a millimeter-waves 5G band, and a baseband signal from an gigabit PON (GPON). Experimental results demonstrate the 5G transceiver digital performance when using RoF technology for distributing the GFDM signal, as well as Gbit/s throughput at 26 GHz. The third contribution is the implementation of a flexible-waveform and multi-application fiber-wireless (FiWi) system toward 5G. Such system includes the FiWi transmission of the GFDM and filtered orthogonal frequency division multiplexing (F-OFDM) signals at 788 MHz, toward long-range cells for remote or rural mobile access, as well as the recently launched 5G NR standard in microwave and mm-waves, aiming enhanced mobile broadband indoor and outdoor applications. Digital signal processing (DSP) is used for selecting the waveform and linearizing the RoF link. Experimental results demonstrate the suitability of the proposed solution to address 5G scenarios and requirements, besides the applicability of using existent fiber-to-the-home (FTTH) networks from Internet service providers for implementing 5G systems. Finally, the fourth contribution is the implementation of a multi-band 5G NR system with photonic-assisted RF amplification (PAA). The approach takes advantage of a novel PAA technique, based on RoF technology and four-wave mixing effect, that allows straightforward integration to the transport networks. Experimental results demonstrate iv uniform and stable 15 dB wideband gain for Long Term Evolution (LTE) and three 5G signals, distributed in the frequency range from 780 MHz to 26 GHz and coexisting in the mobile fronthaul. The obtained digital performance has efficiently met the Third-Generation Partnership Project (3GPP) requirements, demonstrating the applicability of the proposed approach for using fiber-optic links to distribute and jointly amplify LTE and 5G signals in the optical domain.Agência 1Este trabalho apresenta soluções de rádio sobre fibra (RoF) para aplicações em redes sem fio de quinta geração (5G), e inclui quatro contribuições principais. A primeira delas refere-se à proposta e investigação de uma técnica de RoF baseada no modulador eletroóptico de braço duplo, dual-drive Mach-Zehnder (DD-MZM), para a transmissão simultânea de sinais de radiofrequência (RF) em bandas previstas para redes 5G. Resultados experimentais demonstram que o uso do DD-MZM favorece a ausência de interferência entre os sinais de RF transmitidos. A segunda contribuição trata da integração de um transceptor de RF, desenvolvido para aplicações 5G e apto a prover a forma de onda conhecida como generalized frequency division multiplexing (GFDM), em uma rede óptica passiva (PON) ao utilizar RoF e multiplexação por divisão de comprimento de onda (WDM). A arquitetura proposta permite transportar, na mesma infraestrutura de rede, sinais em banda base e de radiofrequência nas faixas do espectro candidatas para 5G. A prova de conceito inclui a distribuição conjunta de três tipos de sinais: um sinal GFDM na banda de 700 MHz, proveniente do transceptor desenvolvido; um sinal digital na frequência de 26 GHz, assumindo a faixa de ondas milimétricas; sinais em banda base provenientes de uma PON dedicada ao serviço de Internet. Resultados experimentais demonstram o desempenho do transceptor de RF ao utilizar a referida arquitetura para distribuir sinais GFDM, além de taxas de transmissão de dados da ordem de Gbit/s na faixa de 26 GHz. A terceira contribuição corresponde à implementação de um sistema fibra/rádio potencial para redes 5G, operando inclusive com o padrão ―5G New Radio (5G NR)‖ nas faixas de micro-ondas e ondas milimétricas. Tal sistema é capaz de prover macro células na banda de 700 MHz para aplicações de longo alcance e/ou rurais, utilizando sinais GFDM ou filtered orthogonal frequency division multiplexing (F-OFDM), assim como femto células na banda de 26 GHz, destinada a altas taxas de transmissão de dados para comunicações de curto alcance. Resultados experimentais demonstram a aplicabilidade da solução proposta para redes 5G, além da viabilidade de utilizar redes ópticas pertencentes a provedores de Internet para favorecer sistemas de nova geração. Por fim, a quarta contribuição trata da implementação de um sistema 5G NR multibanda, assistido por amplificação de RF no domínio óptico. Esse sistema faz uso de um novo método de amplificação, baseado no efeito não linear da mistura de quatro ondas, que vi permite integração direta em redes de transporte envolvendo rádio sobre fibra. Resultados experimentais demonstram ganho de RF igual a 15 dB em uma ampla faixa de frequências (700 MHz até 26 GHz), atendendo simultaneamente tecnologias de quarta e quinta geração. O desempenho digital obtido atendeu aos requisitos estabelecidos pela 3GPP (Third-Generation Partnership Project), indicando a aplicabilidade da solução em questão para distribuir e conjuntamente amplificar sinais de RF em enlaces de fibra óptica