Monitoring high spatiotemporal water dynamics by fusing MODIS, Landsat, water occurrence data and DEM

Monitoring the spatiotemporal dynamics of surface water from remote sensing imagery is essential for understanding water's impact on the global ecosystem and climate change. There is often a tradeoff between the spatial and temporal resolutions of imagery acquired from current satellite sensors and as such various spatiotemporal image fusion methods have been explored to circumvent the challenges this situation presents (e.g., STARFM). However, some challenges persist in mapping surface water at the desired fine spatial and temporal resolution. Principally, the spatiotemporal changes of water bodies are often abrupt and controlled by topographic conditions, which are usually unaddressed in current spatiotemporal image fusion methods. This paper proposes the SpatioTemporal Surface Water Mapping (STSWM) method, which aims to predict Landsat-like, 30 m, surface water maps at an 8-day time step (same as the MODIS 8-day composite product) by integrating topographic information into the analysis. In addition to MODIS imagery acquired on the date of map prediction and a pair of MODIS and Landsat images acquired temporally close to the date of prediction, STSWM also uses the surface water occurrence (SWO, which represents the frequency with which water is present in a pixel) and DEM data to provide, respectively, topographic information below and above the water surface. These data are used to translate the coarse spatial resolution water distribution representation observed by MODIS into a 30 m spatial resolution water distribution map. The STSWM was used to generate an 8-day time series surface water maps of 30 m resolution in six inundation regions globally, and was compared with several other state-of-the-art spatiotemporal methods. The stratified random sampling design was used, and unbiased estimators of the accuracies were provided. The results show that STSWM generated the most accurate surface water map in which the spatial details of surface water were well-represented

Downscaling Gridded DEMs Using the Hopfield Neural Network

A new Hopfield neural network (HNN) model for downscaling a digital elevation model in grid form (gridded DEM) is proposed. The HNN downscaling model works by minimizing the local semivariance as a goal, and by matching the original coarse spatial resolution elevation value as a constraint. The HNN model is defined such that each pixel of the original coarse DEM is divided into f × f subpixels, represented as network neurons. The elevation of each subpixel is then derived iteratively (i.e., optimized) based on minimizing the local semivariance under the coarse elevation constraint. The proposed HNN model was tested against three commonly applied alternative benchmark methods (bilinear resampling, bicubic and Kriging resampling methods) via an experiment using both degraded and sampled datasets at 20-, 60-, and 90-m spatial resolutions. For this task, a simple linear activation function was used in the HNN model. Evaluation of the proposed model was accomplished comprehensively with visual and quantitative assessments against the benchmarks. Visual assessment was based on direct comparison of the same topographic features in different downscaled images, scatterplots, and DEM profiles. Quantitative assessment was based on commonly used parameters for DEM accuracy assessment such as the root mean square error, linear regression parameters m and b, and the correlation coefficient R. Both visual and quantitative assessments revealed the much greater accuracy of the HNN model for increasing the grid density of gridded DEMs

Spatiotemporal subpixel mapping of time-series images

Land cover/land use (LCLU) information extraction from multitemporal sequences of remote sensing imagery is becoming increasingly important. Mixed pixels are a common problem in Landsat and MODIS images that are used widely for LCLU monitoring. Recently developed subpixel mapping (SPM) techniques can extract LCLU information at the subpixel level by dividing mixed pixels into subpixels to which hard classes are then allocated. However, SPM has rarely been studied for time-series images (TSIs). In this paper, a spatiotemporal SPM approach was proposed for SPM of TSIs. In contrast to conventional spatial dependence-based SPM methods, the proposed approach considers simultaneously spatial and temporal dependences, with the former considering the correlation of subpixel classes within each image and the latter considering the correlation of subpixel classes between images in a temporal sequence. The proposed approach was developed assuming the availability of one fine spatial resolution map which exists among the TSIs. The SPM of TSIs is formulated as a constrained optimization problem. Under the coherence constraint imposed by the coarse LCLU proportions, the objective is to maximize the spatiotemporal dependence, which is defined by blending both spatial and temporal dependences. Experiments on three data sets showed that the proposed approach can provide more accurate subpixel resolution TSIs than conventional SPM methods. The SPM results obtained from the TSIs provide an excellent opportunity for LCLU dynamic monitoring and change detection at a finer spatial resolution than the available coarse spatial resolution TSIs

Artificial Intelligence Based Classification for Urban Surface Water Modelling

Estimations and predictions of surface water runoff can provide very useful insights, regarding flood risks in urban areas. To automatically predict the flow behaviour of the rainfall-runoff water, in real-world satellite images, it is important to precisely identify permeable and impermeable areas. This identification indicates and helps to calculate the amount of surface water, by taking into account the amount of water being absorbed in a permeable area and what remains on the impermeable area. In this research, a model of surface water has been established, to predict the behavioural flow of rainfall-runoff water. This study employs a combination of image processing, artificial intelligence and machine learning techniques, for automatic segmentation and classification of permeable and impermeable areas, in satellite images. These techniques investigate the image classification approaches for classifying three land-use categories (roofs, roads, and pervious areas), commonly found in satellite images of the earth’s surface. Three different classification scenarios are investigated, to select the best classification model. The first scenario involves pixel by pixel classification of images, using Classification Tree and Random Forest classification techniques, in 2 different settings of sequential and parallel execution of algorithms. In the second classification scenario, the image is divided into objects, by using Superpixels (SLIC) segmentation method, while three kinds of feature sets are extracted from the segmented objects. The performance of eight different supervised machine learning classifiers is probed, using 5-fold cross-validation, for multiple SLIC values, while detailed performance comparisons lead to conclusions about the classification into different classes, regarding Object-based and Pixel-based classification schemes. Pareto analysis and Knee point selection are used to select SLIC value and the suitable type of classification, among the aforementioned two. Furthermore, a new diversity and weighted sum-based ensemble classification model, called ParetoEnsemble, is proposed, in this classification scenario. The weights are applied to selected component classifiers of an ensemble, creating a strong classifier, where classification is done based on multiple votes from candidate classifiers of the ensemble, as opposed to individual classifiers, where classification is done based on a single vote, from only one classifier. Unbalanced and balanced data-based classification results are also evaluated, to determine the most suitable mode, for satellite image classifications, in this study. Convolutional Neural Networks, based on semantic segmentation, are also employed in the classification phase, as a third scenario, to evaluate the strength of deep learning model SegNet, in the classification of satellite imaging. The best results, from the three classification scenarios, are compared and the best classification method, among the three scenarios, is used in the next phase of water modelling, with the InfoWorks ICM software, to explore the potential of modelling process, regarding a partially automated surface water network. By using the parameter settings, with a specified amount of simulated rain falling, onto the imaged area, the amount of surface water flow is estimated, to get predictions about runoff situations in urban areas, since runoff, in such a situation, can be high enough to pose a dangerous flood risk. The area of Feock, in Cornwall, is used as a simulation area of study, in this research, where some promising results have been derived, regarding classification and modelling of runoff. The correlation coefficient estimation, between classification and runoff accuracy, provides useful insight, regarding the dependence of runoff performance on classification performance. The trained system was tested on some unknown area images as well, demonstrating a reasonable performance, considering the training and classification limitations and conditions. Furthermore, in these unknown area images, reasonable estimations were derived, regarding surface water runoff. An analysis of unbalanced and balanced data-based classification and runoff estimations, for multiple parameter configurations, provides aid to the selection of classification and modelling parameter values, to be used in future unknown data predictions. This research is founded on the incorporation of satellite imaging into water modelling, using selective images for analysis and assessment of results. This system can be further improved, and runoff predictions of high precision can be better achieved, by adding more high-resolution images to the classifiers training. The added variety, to the trained model, can lead to an even better classification of any unknown image, which could eventually provide better modelling and better insights into surface water modelling. Moreover, the modelling phase can be extended, in future research, to deal with real-time parameters, by calibrating the model, after the classification phase, in order to observe the impact of classification on the actual calibration

The occurrence and origin of salinity in non-coastal groundwater in the Waikato region

Aims The aims of this project are to describe the occurrence, and determine the origin of non-coastal saline groundwater in the Waikato region. High salinity limits the use of the water for supply and agricultural use. Understanding the origin and distribution of non-coastal salinity will assist with development and management of groundwater resources in the Waikato. Method The occurrence of non-coastal groundwater salinity was investigated by examining driller’s records and regional council groundwater quality information. Selected wells were sampled for water quality analyses and temperatures were profiled where possible. Water quality analyses include halogens such as chloride, fluoride, iodide and bromide. Ratios of these ions are useful to differentiate between geothermal and seawater origins of salinity (Hem, 1992). Other ionic ratio approaches for differentiating sources and influences on salinity such as those developed by Alcala and Emilio (2008) and Sanchez-Martos et al., (2002), may also be applied. Potential sources of salinity include seawater, connate water, geothermal and anthropogenic influences. The hydrogeologic settings of saline occurrence were also investigated, to explore the potential to predict further occurrence. Results Numerous occurrences of non-coastal saline groundwater have been observed in the Waikato region. Where possible, wells with relatively high total dissolved solids (TDS) were selected for further investigation. Several groundwater samples are moderately saline and exceed the TDS drinking water aesthetic guideline of 1,000 g m-3 (Ministry of Health, 2008). Selected ion ratios (predominantly halogens) were used to assist in differentiating between influences on salinity such as seawater and geothermal. Bromide to iodide ratios, in particular, infer a greater geothermal influence on salinity, although other ratios are not definitive. The anomalously elevated salinity observed appears natural but nevertheless has constrained localised groundwater resource development for dairy factory, industrial and prison water supply use. Further work may show some relationship with geology or tectonics, which could assist prediction of inland saline groundwater occurrence

Urban Expansion, Land Use Land Cover Change and Human Impacts: A Case Study of Rawalpindi

Urbanization in Pakistan has increased rapidly from 25% in 1972 to 42% in 2012. Peripheral zones are being pushed by urbanization much beyond their previous extents. Moreover, dispersed developments along the highways/motorways and unplanned expansion of existing urban centres is instigating a substantial loss of vegetation and open spaces. This research is an effort to analyse the relationship between urban expansion and land use/cover change using a combination of remote sensing, census and field data. Rawalpindi has been chosen as a study area because of its rapidly changing population density and land cover over the last few decades, and availability of satellite and census data. Landsat MSS and TM images of 1972, 1979, 1998 and 2010 which are compatible with the 1972, 1981, 1998 and 2012 Census of Pakistan dates were classified using the Maximum Likelihood classifier. The results of the assessment of classification accuracy yielded an overall accuracy of 75.16%, 72.5%, for Landsat MSS 1972, 1979 images and 84.5% and 87.1% for Landsat TM 1998 and 2010 images. Results reveal that the built up area of the study area has been increased from 7,017 hectares to 36,220 hectares during the 1972 -2012 period. This expansion has been accompanied by the loss of agricultural and forest land. There has been a decrease of approximately 10,000 hectares in cropped area and 2,000 hectares in forest land of the study area during the 1998-2012 inter-censal period. Corroboration of official census data, remote sensing results and field based qualitative data supports the view that high population growth rate, industrialization, better educational and transportation facilities and proximity of the study area to the capital (Islamabad) are the major factors of urban expansion and resulting land cover changes The present research is expected to have significant implications for other rapidly urbanizing areas of Pakistan in particular, and the Global South in general, in delivering baseline information about long term land use/cover changes

SPATIAL TRANSFORMATION PATTERN DUE TO COMMERCIAL ACTIVITY IN KAMPONG HOUSE

ABSTRACT Kampung houses are houses in kampung area of the city. Kampung House oftenly transformed into others use as urban dynamics. One of the transfomation is related to the commercial activities addition by the house owner. It make house with full private space become into mixused house with more public spaces or completely changed into full public commercial building. This study investigate the spatial transformation pattern of the kampung houses due to their commercial activities addition. Site observations, interviews and questionnaires were performed to study the spatial transformation. This study found that in kampung houses, the spatial transformation pattern was depend on type of commercial activities and owner perceptions, and there are several steps of the spatial transformation related the commercial activity addition. Keywords: spatial transformation pattern; commercial activity; owner perception, kampung house; adaptabilit