15,416 research outputs found
Virtual manufacturing: prediction of work piece geometric quality by considering machine and set-up
Lien vers la version Ă©diteur: http://www.tandfonline.com/doi/full/10.1080/0951192X.2011.569952#.U4yZIHeqP3UIn the context of concurrent engineering, the design of the parts, the production planning and the manufacturing facility must be considered simultaneously. The design and development cycle can thus be reduced as manufacturing constraints are taken into account as early as possible. Thus, the design phase takes into account the manufacturing constraints as the customer requirements; more these constraints must not restrict the creativity of design. Also to facilitate the choice of the most suitable system for a specific process, Virtual Manufacturing is supplemented with developments of numerical computations (Altintas et al. 2005, Bianchi et al. 1996) in order to compare at low cost several solutions developed with several hypothesis without manufacturing of prototypes. In this context, the authors want to predict the work piece geometric more accurately by considering machine defects and work piece set-up, through the use of process simulation. A particular case study based on a 3 axis milling machine will be used here to illustrate the authorsâ point of view. This study focuses on the following geometric defects: machine geometric errors, work piece positioning errors due to fixture system and part accuracy
Compliance error compensation in robotic-based milling
The paper deals with the problem of compliance errors compensation in
robotic-based milling. Contrary to previous works that assume that the
forces/torques generated by the manufacturing process are constant, the
interaction between the milling tool and the workpiece is modeled in details.
It takes into account the tool geometry, the number of teeth, the feed rate,
the spindle rotation speed and the properties of the material to be processed.
Due to high level of the disturbing forces/torques, the developed compensation
technique is based on the non-linear stiffness model that allows us to modify
the target trajectory taking into account nonlinearities and to avoid the
chattering effect. Illustrative example is presented that deals with
robotic-based milling of aluminum alloy
ModĂšle des interactions dynamiques
In robotic-based machining, an interaction between the workpiece and technological tool causes essential deflections that significantly decrease the manufacturing accuracy. Relevant compliance errors highly depend on the manipulator configuration and essentially differ throughout the workspace. Their influence is especially important for heavy serial robots. To overcome this difficulty this report presents a new technique for compensation of the compliance errors caused by technological process. In contrast to previous works, this technique is based on the non-linear stiffness model and the reduced elasto-dynamic model of the robotic based milling process. The advantages and practical significance of the proposed approach are illustrated by milling with of KUKA KR270. It is shown that after error compensation technique significantly increase the accuracy of milling.ANR COROUSS
Parametric stiffness analysis of the Orthoglide
This paper presents a parametric stiffness analysis of the Orthoglide. A
compliant modeling and a symbolic expression of the stiffness matrix are
conducted. This allows a simple systematic analysis of the influence of the
geometric design parameters and to quickly identify the critical link
parameters. Our symbolic model is used to display the stiffest areas of the
workspace for a specific machining task. Our approach can be applied to any
parallel manipulator for which stiffness is a critical issue
Mechatronics of a ball screw drive using a N degrees of freedom dynamic model
High performance position control in machine tools can only be achieved modelling the dynamic behavior of the mechatronic system composed by the motor, transmission and control during the design stage. In this work, a complex analytical model of a ball screw drive is presented and integrated in a mechatronic model of the actuator to predict the dynamic behaviour and analyze the impact of each component of the transmission. First, a simple 2 degrees of freedom model is presented, and is analysis sets the basis for the development of a more complex model of several degrees of freedom, whose resulting fundamental transfer functions are represented using natural and modal coordinates. The modeling in modal coordinates carries a reduction of the transfer function that reduces computational work. The two models are compared and experimentally validated in time and frequency domain by means of experimental tests carried out on a specifically developed ball screw drive test benchMinisterio de EconomĂa y Competitividad: Project DPI2015-64450-R (MINECO/FEDER, UE)
University of the Basque Country (UPV/EHU) under the program UFI 11/29
Departamento de EducaciĂłn, PolĂtica LingĂŒĂstica y Culturaâ of the regional government of the Basque Country (IT949-16
SecDec-3.0: numerical evaluation of multi-scale integrals beyond one loop
SecDec is a program which can be used for the factorization of dimensionally
regulated poles from parametric integrals, in particular multi-loop integrals,
and the subsequent numerical evaluation of the finite coefficients. Here we
present version 3.0 of the program, which has major improvements compared to
version 2: it is faster, contains new decomposition strategies, an improved
user interface and various other new features which extend the range of
applicability.Comment: 46 pages, version to appear in Comput.Phys.Com
Development and validation of a calibration gauge for length measurement systems
Due to accuracy requirements, robots and machine-tools need to be periodically verified and calibrated through associated verification systems that sometimes use extensible guidance systems. This work presents the development of a reference artefact to evaluate the performance characteristics of different extensible precision guidance systems applicable to robot and machine tool verification. To this end, we present the design, modeling, manufacture and experimental validation of a reference artefact to evaluate the behavior of these extensible guidance systems. The system should be compatible with customized designed guides, as well as with commercial and existing telescopic guidance systems. Different design proposals are evaluated with finite element analysis, and two final prototypes are experimentally tested assuring that the design performs the expected function. An estimation of the uncertainty of the reference artefact is evaluated with a Monte Carlo simulation
Optimal workplacement for robotic friction stir welding task
Robotic manipulators are widely used in industry for welding processes. Inadequate joint stiffness in the manipulators often limits their use for high quality welding operations because of the deformation errors produced during the process. As a matter of fact, welding quality deteriorates with decreasing joint stiffness. This paper presents an approach to determine an optimal workspace of operation by minimizing the lateral deflection errors in position and orientation of the end effector during Friction Stir Welding. This has been done by estimating the errors in position and orientation of the end effector, also the point of contact with work piece which directly affects welding quality, when it experiences a wrench during welding operation. The technique was applied to an elastodynamic model of a 6 DOF manipulator with different path constraints for welding process to achieve optimal task placement. In a nutshell, optimal starting position or an optimal direction of motion for best welding quality can be precisely computed or even both together can be calculated but with numerical complexity.ANR COROUSS
- âŠ