Reliable and Energy Efficient Network Protocols for Wireless Body Area Networks

In a wireless Body Area Network (WBAN) various sensors are attached on clothing, on the body or are even implanted under the skin. The wireless nature of the network and the wide variety of sensors offers numerous new, practical and innovative applications. A motivating example can be found in the world of health monitoring. The sensors of the WBAN measure for example the heartbeat, the body temperature or record a prolonged electrocardiogram. Using a WBAN, the patient experiences a greater physical mobility and is no longer compelled to stay in a hospital. A WBAN imposes the networks some strict and specific requirements. The devices are tiny, leaving only limited space for a battery. It is therefore of uttermost importance to restrict the energy consumption in the network. A possible solution is the development of energy efficient protocols that regulate the communication between the radios. Further, it is also important to consider the reliability of the communication. The data sent contains medical information and one has to make sure that it is correctly received at the personal device. It is not allowed that a critical message gets lost. In addition, a WBAN has to support the heterogeneity of its devices. This thesis focuses on the development of energy efficient and reliable network protocols for WBANs. Considered solutions are the use of multi-hop communication and the improved interaction between the different network layers. Mechanisms to reduce the energy consumption and to grade up the reliability of the communication are presented. In a first step, the physical layer of the communication near the human body is studied and investigated. The probability of a connection between two nodes on the body is modeled and used to investigate which network topologies can be considered as the most energy efficient and reliable. Next, MOFBAN, a lightweight framework for network architecture is presented. Finally, CICADA is presented: a new cross layer protocol for WBANs that both handles channel medium access and routing

Analysis and Design of Footwear Antennas

Wearable technologies are found in an increasing number of applications including sport and medical monitoring, gaming and consumer electronics. Sensors are used to monitor vital signs and are located on various parts of the body. Footwear sensors permit the collection of data relating to gait, running style, physiotherapy and research. The data is sent from sensors to on-body hubs, often using wired technology, which can impact gait characteristics. This thesis describes the design of footwear antennas for wireless sensor telemetry. The work addresses the challenges of placing antennas close to the foot as well as the proximity to the ground. Guidelines for polarization are presented. The channel link between footwear and wrist is investigated for both narrowband and wideband channels across different frequencies. The effects of the body proximity and movement were gauged for walking subjects and are described in terms of the Rician Distribution K-factor. Different antenna solutions are presented including UWB antennas on various footwear locations as well as 433 MHz integrated antennas in the insole. Both directional and omnidirectional antennas were considered for UWB and the evaluation was for both time-domain and frequencydomain. The research established new ideas that challenge the old paradigm of the waist as the best hub position, demonstrating that a hub on the footwear using directional antennas outperforms a hub on the waist using an omnidirectional antenna. The cumulative distribution functions of measured path gains are evaluated and the results are described in terms of the achievable minimum data rate considering the Body Area Network standard

Ultra Wideband

Ultra wideband (UWB) has advanced and merged as a technology, and many more people are aware of the potential for this exciting technology. The current UWB field is changing rapidly with new techniques and ideas where several issues are involved in developing the systems. Among UWB system design, the UWB RF transceiver and UWB antenna are the key components. Recently, a considerable amount of researches has been devoted to the development of the UWB RF transceiver and antenna for its enabling high data transmission rates and low power consumption. Our book attempts to present current and emerging trends in-research and development of UWB systems as well as future expectations

System design and performance analysis of wireless body area networks

One key solution to provide affordable and proactive healthcare facilities to overcome the fast world population growth and a shortage of medical professionals is through health monitoring systems capable of early disease detection and real-time data transmission leading to considerable improvements in the quality of human life. Wireless body area networks (WBANs) are proposed as promising approaches to providing better mobility and flexibility experience than traditional wired medical systems by using low-power, miniaturised sensors inside, around, or off the human body and are employed to monitor physiological signals. However, the design of reliable and energy efficient in-body communication systems is still a major research challenge since implant devices are characterised by strict requirements on size, energy consumption and safety. Moreover, there is still no agreement regarding QoS support in WBANs. The first part of this work concentrates on the design and performance evaluation of WBAN communication systems involving the ‘in-body to in-body’ and ‘in-body to on-body’ scenarios. The essential step is to derive the statistical WBAN path loss (PL) models, which characterise the signal propagation energy loss transmitting via intra-body region. Moreover, from the point of view of human body safety evaluation, the obtained specific absorption rate (SAR) values are compared with the latest Institute of Electrical and Electronics Engineers (IEEE) 802.15.6 Task Group technical standard and the International Commission on Non-Ionizing Radiation Protection (ICNIRP) safety guidelines. Link budget analysis is then presented using a range of energy-efficient modulation schemes, and the results are given including the transmission distance, data rate and transmitting power in individual sections. On the other hand, major quality of service (QoS) support challenges in WBANs are discussed and investigated. To achieve higher lifetime and lower network energy consumption, different data routing protocol methods, including incremental relaying and the two-relay based routing technique are taken into account. A set of key QoS metrics for linear mathematical models is given along with the related subjective functions. The incremental relaying routing protocol promises significant enhancements in in-body WBAN network lifetime by minimising the overall communication distance while the two-relay based routing method achieves better performance in terms of emergency data transmission and high traffic condition, QoS-aware WBANs design. Moreover, to handle real-time high data transmission applications such as capsule endoscope image transmission, a flexible QoS-aware wireless body area sensor networks (WBASNs) model is proposed and evaluated that can bring novel solutions for a realistic multi-user hospital environment regarding information packet collision probability, manageable numbers of sensor nodes and a wide range of data rates

Near field sensing and antenna design for wireless body area network

PhD ThesisWireless body area network (WBAN) has emerged in recent years as a special class of wireless sensor network; hence, WBAN inherits the wireless sensor network challenges of interference by passive objects in indoor environments. However, attaching wireless nodes to a person’s body imposes a unique challenge, presented by continuous changes in the working environment, due to the normal activities of the monitored personnel. Basic activities, like sitting on a metallic chair or standing near a metallic door, drastically change the antenna behaviour when the metallic object is within the antenna near field. Although antenna coupling with the human body has been investigated by many recent studies, the coupling of the WBAN node antenna with other objects within the surrounding environment has not been thoroughly studied. To address the problems above, the thesis investigates the state-of-the art of WBAN, eximanes the influence of metallic object near an antenna through experimental studies and proposes antenna design and their applications for near field environments. This thesis philosophy for the previously mentioned challenge is to examine and improve the WBAN interaction with its surrounding by enabling the WBAN node to detect nearby objects based solely on change in antenna measurements. The thesis studies the interference caused by passive objects on WBAN node antenna and extracts relevant features to sense the object presence within the near field, and proposes new design of WBAN antenna suitable for this purpose. The major contributions of this study can be summarised as follows. First, it observes and defines the changes in the return loss of a narrow band antenna when a metallic object is introduced in its near field. Two methods were proposed to detect the object, based on the refelction coefficient and transmission coefficient of an antenna in free space. Then, the thesis introduces a new antenna design that conforms to the WBAN requirements of size, while achieving very low sensitivity to human body. This was achieved through combining two opposite Vivaldi shapes on one PCB and using a metallic sheet to act as a reflector, which minimised the antenna coupling with the human body and reduced the radiation pattern towards the body. Finally, the proposed antennas were tested on several human body parts with nearby metallic objects, to compare the change in antenna s-parameters due to presence of the human body and presence of the metallic object. Based on the measurements, basic statistical indicators and Principal Component Analysis were proposed to detect object presense and estimate its distance. In conclusion, the thesis successfully shows WBAN antenna’s ability to detect nearby metallic objects through a set of proposed indicators and novel antenna design. The thesis is wrapped up by the suggestion to investigate time domain features and modulated signal for future work in WBAN near field sensing

Design of a correlator for UWB transceivers

Master'sMASTER OF ENGINEERIN