Secure Routing in Wireless Mesh Networks

Wireless mesh networks (WMNs) have emerged as a promising concept to meet the challenges in next-generation networks such as providing flexible, adaptive, and reconfigurable architecture while offering cost-effective solutions to the service providers. Unlike traditional Wi-Fi networks, with each access point (AP) connected to the wired network, in WMNs only a subset of the APs are required to be connected to the wired network. The APs that are connected to the wired network are called the Internet gateways (IGWs), while the APs that do not have wired connections are called the mesh routers (MRs). The MRs are connected to the IGWs using multi-hop communication. The IGWs provide access to conventional clients and interconnect ad hoc, sensor, cellular, and other networks to the Internet. However, most of the existing routing protocols for WMNs are extensions of protocols originally designed for mobile ad hoc networks (MANETs) and thus they perform sub-optimally. Moreover, most routing protocols for WMNs are designed without security issues in mind, where the nodes are all assumed to be honest. In practical deployment scenarios, this assumption does not hold. This chapter provides a comprehensive overview of security issues in WMNs and then particularly focuses on secure routing in these networks. First, it identifies security vulnerabilities in the medium access control (MAC) and the network layers. Various possibilities of compromising data confidentiality, data integrity, replay attacks and offline cryptanalysis are also discussed. Then various types of attacks in the MAC and the network layers are discussed. After enumerating the various types of attacks on the MAC and the network layer, the chapter briefly discusses on some of the preventive mechanisms for these attacks.Comment: 44 pages, 17 figures, 5 table

Flexible cross layer design for improved quality of service in MANETs

This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel UniversityMobile Ad hoc Networks (MANETs) are becoming increasingly important because of their unique characteristics of connectivity. Several delay sensitive applications are starting to appear in these kinds of networks. Therefore, an issue in concern is to guarantee Quality of Service (QoS) in such constantly changing communication environment. The classical QoS aware solutions that have been used till now in the wired and infrastructure wireless networks are unable to achieve the necessary performance in the MANETs. The specialized protocols designed for multihop ad hoc networks offer basic connectivity with limited delay awareness and the mobility factor in the MANETs makes them even more unsuitable for use. Several protocols and solutions have been emerging in almost every layer in the protocol stack. The majority of the research efforts agree on the fact that in such dynamic environment in order to optimize the performance of the protocols, there is the need for additional information about the status of the network to be available. Hence, many cross layer design approaches appeared in the scene. Cross layer design has major advantages and the necessity to utilize such a design is definite. However, cross layer design conceals risks like architecture instability and design inflexibility. The aggressive use of cross layer design results in excessive increase of the cost of deployment and complicates both maintenance and upgrade of the network. The use of autonomous protocols like bio-inspired mechanisms and algorithms that are resilient on cross layer information unavailability, are able to reduce the dependence on cross layer design. In addition, properties like the prediction of the dynamic conditions and the adaptation to them are quite important characteristics. The design of a routing decision algorithm based on Bayesian Inference for the prediction of the path quality is proposed here. The accurate prediction capabilities and the efficient use of the plethora of cross layer information are presented. Furthermore, an adaptive mechanism based on the Genetic Algorithm (GA) is used to control the flow of the data in the transport layer. The aforementioned flow control mechanism inherits GA’s optimization capabilities without the need of knowing any details about the network conditions, thus, reducing the cross layer information dependence. Finally, is illustrated how Bayesian Inference can be used to suggest configuration parameter values to the other protocols in different layers in order to improve their performance.National Foundation of Scholarships of Greece(I.K.Y.

Cross-layer design of multi-hop wireless networks

MULTI -hop wireless networks are usually defined as a collection of nodes equipped with radio transmitters, which not only have the capability to communicate each other in a multi-hop fashion, but also to route each others’ data packets. The distributed nature of such networks makes them suitable for a variety of applications where there are no assumed reliable central entities, or controllers, and may significantly improve the scalability issues of conventional single-hop wireless networks. This Ph.D. dissertation mainly investigates two aspects of the research issues related to the efficient multi-hop wireless networks design, namely: (a) network protocols and (b) network management, both in cross-layer design paradigms to ensure the notion of service quality, such as quality of service (QoS) in wireless mesh networks (WMNs) for backhaul applications and quality of information (QoI) in wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of this Ph.D. dissertation, different network settings are used as illustrative examples, however the proposed algorithms, methodologies, protocols, and models are not restricted in the considered networks, but rather have wide applicability. First, this dissertation proposes a cross-layer design framework integrating a distributed proportional-fair scheduler and a QoS routing algorithm, while using WMNs as an illustrative example. The proposed approach has significant performance gain compared with other network protocols. Second, this dissertation proposes a generic admission control methodology for any packet network, wired and wireless, by modeling the network as a black box, and using a generic mathematical 0. Abstract 3 function and Taylor expansion to capture the admission impact. Third, this dissertation further enhances the previous designs by proposing a negotiation process, to bridge the applications’ service quality demands and the resource management, while using WSNs as an illustrative example. This approach allows the negotiation among different service classes and WSN resource allocations to reach the optimal operational status. Finally, the guarantees of the service quality are extended to the environment of multiple, disconnected, mobile subnetworks, where the question of how to maintain communications using dynamically controlled, unmanned data ferries is investigated

Review of Ad Hoc Networks scenarios and challenges in years 2015-2019

A Mobile Ad-hoc Network (MANET) protocol performance analysis depends on the type of simulation tools, mobility models, and metrics used. These parameters\u27 choice is crucial to researchers because it may produce an inaccurate result if it is not well chosen. The challenges researcher is facing are on the choice of these four parameters. Our survey shows an inclination to used Ad-hoc On-Demand Distance Vector routing (AODV) for performance comparison and enhancement of it by the researcher. Network simulation 2 (NS2) was the most selected tool, but we observe a decline in its utilization in recent years. Random Waypoint Mobility model (RWPM) was the most used mobility model. We have found a high percentage of the published article did not mention the mobility models use; this will make the result difficult for performance comparison with other works. Packet Delivery Ratio (PDR), End to End Delay (E2ED) were the most used metrics. Some authors have self-developed their simulation tools; the authors have also used new metrics and protocols to get a particular result based on their research objective. However, some criteria of choosing a protocol, metrics, mobility model, and simulation tool were not described, decreasing the credibility of their papers\u27 results. Improvement needs to be done in the Ad-hoc network in terms of benchmark, acceptable scenario parameters. This survey will give the best practice to be used and some recommendations to the Ad-hoc network community