Use of accelerometers in the control of practical prosthetic arms

Accelerometers can be used to augment the control of powered prosthetic arms. They can detect the orientation of the joint and limb and the controller can correct for the amount of torque required to move the limb. They can also be used to create a platform, with a fixed orientation relative to gravity for the object held in the hand. This paper describes three applications for this technology, in a powered wrist and powered arm. By adding sensors to the arm making these data available to the controller, the input from the user can be made simpler. The operator will not need to correct for changes in orientation of their body as they move. Two examples of the correction for orientation against gravity are described and an example of the system designed for use by a patient. The controller for all examples is a distributed set of microcontrollers, one node for each joint, linked with the Control Area Network (CAN) bus. The clinical arm uses a version of the Southampton Adaptive Manipulation Scheme to control the arm and hand. In this control form the user gives simpler input commands and leaves the detailed control of the arm to the controller

Mind-Body-Technology: ‘Nosce te Ipsum’ and a theory of prosthetic ‘trialism’

This chapter will discuss a profound and fundamental interrelationship between mind, body and technology in terms of what it means to be ‘human’, or, what ‘being’ human might mean. One historical, yet enduring, theory of the human subject is René Descartes’s philosophy of the mind distinct from the body – this is termed ‘Cartesian dualism’. Whilst this is a classical, if outmoded, model of conceiving of a philosophy of the subject, it also provides a useful conceptual framework through which to critique, and arrive at, a different concept of how the terms ‘mind’ and ‘body’ might operate. For example, the mind/body binary distinction can be interrogated and deconstructed to accommodate the role of technology as having an ontologically embedded position within the very definition of ‘humanity’. Indeed, ‘anthropogenesis’ – the very becoming of humanity – might instead incorporate the role of technological prosthesis to any mind/body dualism in defining the ‘human subject’. We will propose that this ‘dualism’ should be reconsidered for a fundamentally entangled mind-body-technology ‘trialism’ in the emergence of a distinct human being. However, at the same time, this interconnected relationship is also the object of power and control

Development of an externally powered prosthetic hook for amputees

The powered hook with trigger finger appears to be a useful adaptation of a terminal device for an amputee when performing vocational activities involving the use of a powered tool requiring a trigger control. The proportional control system includes transducers and amplifiers and appears to have widespread application for control of any external power, whether it be in the orthotic or prosthetic field

Neuro-electronic technology in medicine and beyond

This dissertation looks at the technology and social issues involved with interfacing electronics directly to the human nervous system, in particular the methods for both reading and stimulating nerves. The development and use of cochlea implants is discussed, and is compared with recent developments in artificial vision. The final sections consider a future for non-medicinal applications of neuro-electronic technology. Social attitudes towards use for both medicinal and non-medicinal purposes are discussed, and the viability of use in the latter case assessed

What is embodiment? a psychometric approach

What is it like to have a body? The present study takes a psychometric approach to this question. We collected structured introspective reports of the rubber hand illusion, to systematically investigate the structure of bodily self-consciousness. Participants observed a rubber hand that was stroked either synchronously or asynchronously with their own hand and then made proprioceptive judgments of the location of their own hand and used Likert scales to rate their agreement or disagreement with 27 statements relating to their subjective experience of the illusion. Principal components analysis of this data revealed four major components of the experience across conditions, which we interpret as: embodiment of rubber hand, loss of own hand, movement, and affect. In the asynchronous condition, an additional fifth component, deafference, was found. Secondary analysis of the embodiment of runner hand component revealed three subcomponents in both conditions: ownership, location, and agency. The ownership and location components were independent significant predictors of proprioceptive biases induced by the illusion. These results suggest that psychometric tools may provide a rich method for studying the structure of conscious experience, and point the way towards an empirically rigorous phenomenology

Design and fabrication of an end effector

The construction is described of a prototype mechanical hand or 'end effector' for use on a remotely controlled robot, but with possible application as a prosthetic device. An analysis of hand motions is reported, from which it is concluded that the two most important manipulations (apart from grasps) are to be able to pick up a tool and draw it into a nested grip against the palm, and to be able to hold a pistol-grip tool such as an electric drill and pull the trigger. A model was tested and found capable of both these operations

On the development of a cybernetic prosthetic hand

The human hand is the end organ of the upper limb, which in humans serves the important function of prehension, as well as being an important organ for sensation and communication. It is a marvellous example of how a complex mechanism can be implemented, capable of realizing very complex and useful tasks using a very effective combination of mechanisms, sensing, actuation and control functions. In this thesis, the road towards the realization of a cybernetic hand has been presented. After a detailed analysis of the model, the human hand, a deep review of the state of the art of artificial hands has been carried out. In particular, the performance of prosthetic hands used in clinical practice has been compared with the research prototypes, both for prosthetic and for robotic applications. By following a biomechatronic approach, i.e. by comparing the characteristics of these hands with the natural model, the human hand, the limitations of current artificial devices will be put in evidence, thus outlining the design goals for a new cybernetic device. Three hand prototypes with a high number of degrees of freedom have been realized and tested: the first one uses microactuators embedded inside the structure of the fingers, and the second and third prototypes exploit the concept of microactuation in order to increase the dexterity of the hand while maintaining the simplicity for the control. In particular, a framework for the definition and realization of the closed-loop electromyographic control of these devices has been presented and implemented. The results were quite promising, putting in evidence that, in the future, there could be two different approaches for the realization of artificial devices. On one side there could be the EMG-controlled hands, with compliant fingers but only one active degree of freedom. On the other side, more performing artificial hands could be directly interfaced with the peripheral nervous system, thus establishing a bi-directional communication with the human brain

Design of a robotic hand with a biologically-inspired parallel actuation system for prosthetic applications

Trabajo presentado al 34th Annual Mechanisms and Robotics Conference celebrado en Quebec del 15 al 18 de agosto de 2010.This paper presents the design of a robotic hand for prosthetic applications. The main characteristic of this robotic hand is its biologically-inspired parallel actuation system, which is based on the behavior/strength space of the Flexor Digitorum Profundus (FDP) and the Flexor Digitorum Superficialis (FDS) muscles. The design separates the strength space of the FDS and FDP muscles into a lighter strength region where finer manipulation and general approach tasks are executed, and a higher strength region where the more robust grasps are achieved. Two parallel actuator types and kinematic structures are designed to complement the requirements of both strength space regions.This research was performed under an award/contract from Telemedicine Advanced Technology Research Center (TATRC), of the U.S. Army Medical Research and Materiel Command (USAMRMC) of the U.S. Department of Defense.Peer Reviewe

Design of a robotic hand and simple EMG input controller with a biologically-inspired parallel actuation system for prosthetic applications

This paper presents the mechatronic design of a robotic hand for prosthetic applications. The main characteristic of this robotic hand is its biologically-inspired parallel actuation system, which is based on the behavior/strength space of the Flexor Digitorum Profundus (FDP) and the Flexor Digitorum Superficialis (FDS) muscles. The design separates the strength space of the FDS and FDP muscles into a lighter strength region where finer manipulation and general approach tasks are executed, and a higher strength region where the more robust grasps are achieved. Two parallel actuator types and kinematic structures are designed to complement the requirements of both strength space regions.This unique structure is intended to be driven by electromyographical (EMG) signals captured at the surface of the skin. The direct relation between signal and actuation system lends itself well to interpreting the EMG signals from the FDP and FDS muscles into effective task execution, with the goal of helping the user to achieve a good approximation of the full capabilities associated with the human hand, without compromising strength, dexterity, appearance, or weight; which are common issues associated with prosthetic hands. The designed finger’s capability of having a strength space similar to that of the FDS and FDP muscles is validated via direct inputs from a power supply and then via a controller using an actual EMG signal input from the human forearm. The controller is a simple feed forward system at this point in the research but provides the appropriate framework to integrate more elaborate control schemes and EMG signal conditioning as this portion of the research area matures.Peer ReviewedPostprint (author’s final draft

Prosthetic embodiment: systematic review on definitions, measures, and experimental paradigms

The term embodiment has become omnipresent within prosthetics research and is often used as a metric of the progress made in prosthetic technologies, as well as a hallmark for user acceptance. However, despite the frequent use of the term, the concept of prosthetic embodiment is often left undefined or described incongruently, sometimes even within the same article. This terminological ambiguity complicates the comparison of studies using embodiment as a metric of success, which in turn hinders the advancement of prosthetics research. To resolve these terminological ambiguities, we systematically reviewed the used definitions of embodiment in the prosthetics literature. We performed a thematic analysis of the definitions and found that embodiment is often conceptualized in either of two frameworks based on body representations or experimental phenomenology. We concluded that treating prosthetic embodiment within an experimental phenomenological framework as the combination of ownership and agency allows for embodiment to be a quantifiable metric for use in translational research. To provide a common reference and guidance on how to best assess ownership and agency, we conducted a second systematic review, analyzing experiments and measures involving ownership and agency. Together, we highlight a pragmatic definition of prosthetic embodiment as the combination of ownership and agency, and in an accompanying article, we provide a perspective on a multi-dimensional framework for prosthetic embodiment. Here, we concluded by providing recommendations on metrics that allow for outcome comparisons between studies, thereby creating a common reference for further discussions within prosthetics research