Reliability-aware and energy-efficient system level design for networks-on-chip

2015 Spring.Includes bibliographical references.With CMOS technology aggressively scaling into the ultra-deep sub-micron (UDSM) regime and application complexity growing rapidly in recent years, processors today are being driven to integrate multiple cores on a chip. Such chip multiprocessor (CMP) architectures offer unprecedented levels of computing performance for highly parallel emerging applications in the era of digital convergence. However, a major challenge facing the designers of these emerging multicore architectures is the increased likelihood of failure due to the rise in transient, permanent, and intermittent faults caused by a variety of factors that are becoming more and more prevalent with technology scaling. On-chip interconnect architectures are particularly susceptible to faults that can corrupt transmitted data or prevent it from reaching its destination. Reliability concerns in UDSM nodes have in part contributed to the shift from traditional bus-based communication fabrics to network-on-chip (NoC) architectures that provide better scalability, performance, and utilization than buses. In this thesis, to overcome potential faults in NoCs, my research began by exploring fault-tolerant routing algorithms. Under the constraint of deadlock freedom, we make use of the inherent redundancy in NoCs due to multiple paths between packet sources and sinks and propose different fault-tolerant routing schemes to achieve much better fault tolerance capabilities than possible with traditional routing schemes. The proposed schemes also use replication opportunistically to optimize the balance between energy overhead and arrival rate. As 3D integrated circuit (3D-IC) technology with wafer-to-wafer bonding has been recently proposed as a promising candidate for future CMPs, we also propose a fault-tolerant routing scheme for 3D NoCs which outperforms the existing popular routing schemes in terms of energy consumption, performance and reliability. To quantify reliability and provide different levels of intelligent protection, for the first time, we propose the network vulnerability factor (NVF) metric to characterize the vulnerability of NoC components to faults. NVF determines the probabilities that faults in NoC components manifest as errors in the final program output of the CMP system. With NVF aware partial protection for NoC components, almost 50% energy cost can be saved compared to the traditional approach of comprehensively protecting all NoC components. Lastly, we focus on the problem of fault-tolerant NoC design, that involves many NP-hard sub-problems such as core mapping, fault-tolerant routing, and fault-tolerant router configuration. We propose a novel design-time (RESYN) and a hybrid design and runtime (HEFT) synthesis framework to trade-off energy consumption and reliability in the NoC fabric at the system level for CMPs. Together, our research in fault-tolerant NoC routing, reliability modeling, and reliability aware NoC synthesis substantially enhances NoC reliability and energy-efficiency beyond what is possible with traditional approaches and state-of-the-art strategies from prior work

BlackOut: Enabling fine-grained power gating of buffers in Network-on-Chip routers

The Network-on-Chip (NoC) router buffers play an instrumental role in the performance of both the interconnection fabric and the entire multi-/many-core system. Nevertheless, the buffers also constitute the major leakage power consumers in NoC implementations. Traditionally, they are designed to accommodate worst-case traffic scenarios, so they tend to remain idle, or under-utilized, for extended periods of time. The under-utilization of these valuable resources is exemplified when one profiles real application workloads; the generated traffic is bursty in nature, whereby high traffic periods are sporadic and infrequent, in general. The mitigation of the leakage power consumption of NoC buffers via power gating has been explored in the literature, both at coarse (router-level) and fine (buffer-level) granularities. However, power gating at the router granularity is suitable only for low and medium traffic conditions, where the routers have enough opportunities to be powered down. Under high traffic, the sleeping potential rapidly diminishes. Moreover, disabling an entire router greatly affects the NoC functionality and the network connectivity. This article presents BlackOut, a fine-grained power-gating methodology targeting individual router buffers. The goal is to minimize leakage power consumption, without adversely impacting the system performance. The proposed framework is agnostic of the routing algorithm and the network topology, and it is applicable to any router micro-architecture. Evaluation results obtained using both synthetic traffic patterns and real applications in 64-core systems indicate energy savings of up to 70%, as compared to a baseline NoC, with a near-negligible performance overhead of around 2%. BlackOut is also shown to significantly outperformby 35%, on averagetwo current state-of-the-art power-gating solutions, in terms of energy savings. Not tailored to any topology, routing algorithm and NoC router architecture.Router-to-router communication. No need for custom, region-based/global networks.Effective at low, medium and high traffic. Other solutions are more restrictive.+35% energy saving, on average, against two state-of-the-art power-gating solutions.Negligible performance overhead (+2%) compared to the baseline architecture

CUTBUF: Buffer Management and Router Design for Traffic Mixing in VNET-Based NoCs

"© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works[EN] Router's buffer design and management strongly influence energy, area and performance of on-chip networks, hence it is crucial to encompass all of these aspects in the design process. At the same time, the NoC design cannot disregard preventing network-level and protocol-level deadlocks by devoting ad-hoc buffer resources to that purpose. In chip multiprocessor systems the coherence protocol usually requires different virtual networks (VNETs) to avoid deadlocks. Moreover, VNETutilization is highly unbalanced and there is no way to share buffers between them due to the need to isolate different traffic types. This paper proposes CUTBUF, a novel NoC router architecture to dynamically assign virtual channels (VCs) to VNETs depending on the actual VNETs load to significantly reduce the number of physical buffers in routers, thus saving area and power without decreasing NoC performance. Moreover, CUTBUF allows to reuse the same buffer for different traffic types while ensuring that the optimized NoC is deadlock-free both at network and protocol level. In this perspective, all the VCs are considered spare queues not statically assigned to a specific VNETand the coherence protocol only imposes a minimum number of queues to be implemented. Synthetic applications as well as real benchmarks have been used to validate CUTBUF, considering architectures ranging from 16 up to 48 cores. Moreover, a complete RTL router has been designed to explore area and power overheads. Results highlight how CUTBUF can reduce router buffers up to 33 percent with 2 percent of performance degradation, a 5 percent of operating frequency decrease and area and power saving up to 30.6 and 30.7 percent, respectively. Conversely, the flexibility of the proposed architecture improves by 23.8 percent the performance of the baseline NoC router when the same number of buffers is used.Zoni, D.; Flich Cardo, J.; Fornaciari, W. (2016). CUTBUF: Buffer Management and Router Design for Traffic Mixing in VNET-Based NoCs. IEEE Transactions on Parallel and Distributed Systems. 27(6):1603-1616. doi:10.1109/TPDS.2015.2468716S1603161627

Security of Electrical, Optical and Wireless On-Chip Interconnects: A Survey

The advancement of manufacturing technologies has enabled the integration of more intellectual property (IP) cores on the same system-on-chip (SoC). Scalable and high throughput on-chip communication architecture has become a vital component in today's SoCs. Diverse technologies such as electrical, wireless, optical, and hybrid are available for on-chip communication with different architectures supporting them. Security of the on-chip communication is crucial because exploiting any vulnerability would be a goldmine for an attacker. In this survey, we provide a comprehensive review of threat models, attacks, and countermeasures over diverse on-chip communication technologies as well as sophisticated architectures.Comment: 41 pages, 24 figures, 4 table

Aging-Aware Routing Algorithms for Network-on-Chips

Network-on-Chip (NoC) architectures have emerged as a better replacement of the traditional bus-based communication in the many-core era. However, continuous technology scaling has made aging mechanisms, such as Negative Bias Temperature Instability (NBTI) and electromigration, primary concerns in NoC design. In this work, a novel system-level aging model is proposed to model the effects of aging in NoCs, caused due to (a) asymmetric communication patterns between the network nodes, and (b) runtime traffic variations due to routing policies. This work observes a critical need of a holistic aging analysis, which when combined with power-performance optimization, poses a multi-objective design challenge. To solve this problem, two different aging-aware routing algorithms are proposed: (a) congestion-oblivious Mixed Integer Linear Programming (MILP)-based routing algorithm, and (b) congestion-aware adaptive routing algorithm and router micro-architecture. After extensive experimental evaluations, proposed routing algorithms reduce aging-induced power-performance overheads while also improving the system robustness