Comparison of two methods for choosing repeatable control strategies for kinematically redundant manipulators, A

Includes bibliographical references.A kinematically redundant manipulator is a robotic system that has more than the minimum number of degrees of freedom that are required for a specified task. Due to this additional freedom, control strategies may yield solutions which are not repeatable in the sense that the manipulator may not return to its initial joint configuration for closed end effector paths. This paper presents two methods for choosing repeatable control strategies which minimize their distance from a non-repeatable inverse with desirable properties. The first method minimizes the integral norm of the difference of the desired inverse and a repeatable inverse. While this is the more appropriate criterion, it results in a difficult optimization. The second method, which minimizes the distance of the null vectors associated with the desired and the repeatable inverses, is somewhat easier to implement. As an illustrative example the pseudoinverse is approximated in a region of the joint space using both techniques.This work was supported by Sandia National Laboratories under contract number I8-4379B. Additional support was provided by the NEC Corporation and the TRW Foundation

Calculation of repeatable control strategies for kinematically redundant manipulators

Includes bibliographical references (page 130).A kinematically redundant manipulator is a robotic system that has more than the minimum number of degrees of freedom that are required for a specified task. Due to this additional freedom, control strategies may yield solutions which are not repeatable in the sense that the manipulator may not return to its initial joint configuration for closed end-effector paths. This paper compares two methods for choosing repeatable control strategies which minimize their distance from a nonrepeatable inverse with desirable properties. The first method minimizes the integral norm of the difference of the desired inverse and a repeatable inverse while the second method minimizes the distance of the null vectors associated with the desired and the repeatable inverses. It is then shown how the two techniques can be combined in order to obtain the advantages of both methods. As an illustrative example the pseudoinverse is approximated in a region of the joint space for a seven-degree-of-freedom manipulator

Postprocesamiento CAM-ROBOTICA orientado al prototipado y mecanizado en células robotizadas complejas

The main interest of this thesis consists of the study and implementation of postprocessors to adapt the toolpath generated by a Computer Aided Manufacturing (CAM) system to a complex robotic workcell of eight joints, devoted to the rapid prototyping of 3D CAD-defined products. It consists of a 6R industrial manipulator mounted on a linear track and synchronized with a rotary table. To accomplish this main objective, previous work is required. Each task carried out entails a methodology, objective and partial results that complement each other, namely: - It is described the architecture of the workcell in depth, at both displacement and joint-rate levels, for both direct and inverse resolutions. The conditioning of the Jacobian matrix is described as kinetostatic performance index to evaluate the vicinity to singular postures. These ones are analysed from a geometric point of view. - Prior to any machining, the additional external joints require a calibration done in situ, usually in an industrial environment. A novel Non-contact Planar Constraint Calibration method is developed to estimate the external joints configuration parameters by means of a laser displacement sensor. - A first control is originally done by means of a fuzzy inference engine at the displacement level, which is integrated within the postprocessor of the CAM software. - Several Redundancy Resolution Schemes (RRS) at the joint-rate level are compared for the configuration of the postprocessor, dealing not only with the additional joints (intrinsic redundancy) but also with the redundancy due to the symmetry on the milling tool (functional redundancy). - The use of these schemes is optimized by adjusting two performance criterion vectors related to both singularity avoidance and maintenance of a preferred reference posture, as secondary tasks to be done during the path tracking. Two innovative fuzzy inference engines actively adjust the weight of each joint in these tasks.Andrés De La Esperanza, FJ. (2011). Postprocesamiento CAM-ROBOTICA orientado al prototipado y mecanizado en células robotizadas complejas [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/10627Palanci

Real-Time Hybrid Visual Servoing of a Redundant Manipulator via Deep Reinforcement Learning

Fixtureless assembly may be necessary in some manufacturing tasks and environ-ments due to various constraints but poses challenges for automation due to non-deterministic characteristics not favoured by traditional approaches to industrial au-tomation. Visual servoing methods of robotic control could be effective for sensitive manipulation tasks where the desired end-effector pose can be ascertained via visual cues. Visual data is complex and computationally expensive to process but deep reinforcement learning has shown promise for robotic control in vision-based manipu-lation tasks. However, these methods are rarely used in industry due to the resources and expertise required to develop application-specific systems and prohibitive train-ing costs. Training reinforcement learning models in simulated environments offers a number of benefits for the development of robust robotic control algorithms by reducing training time and costs, and providing repeatable benchmarks for which algorithms can be tested, developed and eventually deployed on real robotic control environments. In this work, we present a new simulated reinforcement learning envi-ronment for developing accurate robotic manipulation control systems in fixtureless environments. Our environment incorporates a contemporary collaborative industrial robot, the KUKA LBR iiwa, with the goal of positioning its end effector in a generic fixtureless environment based on a visual cue. Observational inputs are comprised of the robotic joint positions and velocities, as well as two cameras, whose positioning reflect hybrid visual servoing with one camera attached to the robotic end-effector, and another observing the workspace respectively. We propose a state-of-the-art deep reinforcement learning approach to solving the task environment and make prelimi-nary assessments of the efficacy of this approach to hybrid visual servoing methods for the defined problem environment. We also conduct a series of experiments ex-ploring the hyperparameter space in the proposed reinforcement learning method. Although we could not prove the efficacy of a deep reinforcement approach to solving the task environment with our initial results, we remain confident that such an ap-proach could be feasible to solving this industrial manufacturing challenge and that our contributions in this work in terms of the novel software provide a good basis for the exploration of reinforcement learning approaches to hybrid visual servoing in accurate manufacturing contexts

Contact aware robust semi-autonomous teleoperation of mobile manipulators

In the context of human-robot collaboration, cooperation and teaming, the use of mobile manipulators is widespread on applications involving unpredictable or hazardous environments for humans operators, like space operations, waste management and search and rescue on disaster scenarios. Applications where the manipulator's motion is controlled remotely by specialized operators. Teleoperation of manipulators is not a straightforward task, and in many practical cases represent a common source of failures. Common issues during the remote control of manipulators are: increasing control complexity with respect the mechanical degrees of freedom; inadequate or incomplete feedback to the user (i.e. limited visualization or knowledge of the environment); predefined motion directives may be incompatible with constraints or obstacles imposed by the environment. In the latter case, part of the manipulator may get trapped or blocked by some obstacle in the environment, failure that cannot be easily detected, isolated nor counteracted remotely. While control complexity can be reduced by the introduction of motion directives or by abstraction of the robot motion, the real-time constraint of the teleoperation task requires the transfer of the least possible amount of data over the system's network, thus limiting the number of physical sensors that can be used to model the environment. Therefore, it is of fundamental to define alternative perceptive strategies to accurately characterize different interaction with the environment without relying on specific sensory technologies. In this work, we present a novel approach for safe teleoperation, that takes advantage of model based proprioceptive measurement of the robot dynamics to robustly identify unexpected collisions or contact events with the environment. Each identified collision is translated on-the-fly into a set of local motion constraints, allowing the exploitation of the system redundancies for the computation of intelligent control laws for automatic reaction, without requiring human intervention and minimizing the disturbance of the task execution (or, equivalently, the operator efforts). More precisely, the described system consist in two different building blocks. The first, for detecting unexpected interactions with the environment (perceptive block). The second, for intelligent and autonomous reaction after the stimulus (control block). The perceptive block is responsible of the contact event identification. In short, the approach is based on the claim that a sensorless collision detection method for robot manipulators can be extended to the field of mobile manipulators, by embedding it within a statistical learning framework. The control deals with the intelligent and autonomous reaction after the contact or impact with the environment occurs, and consist on an motion abstraction controller with a prioritized set of constrains, where the highest priority correspond to the robot reconfiguration after a collision is detected; when all related dynamical effects have been compensated, the controller switch again to the basic control mode

AI based Robot Safe Learning and Control

Introduction This open access book mainly focuses on the safe control of robot manipulators. The control schemes are mainly developed based on dynamic neural network, which is an important theoretical branch of deep reinforcement learning. In order to enhance the safety performance of robot systems, the control strategies include adaptive tracking control for robots with model uncertainties, compliance control in uncertain environments, obstacle avoidance in dynamic workspace. The idea for this book on solving safe control of robot arms was conceived during the industrial applications and the research discussion in the laboratory. Most of the materials in this book are derived from the authors’ papers published in journals, such as IEEE Transactions on Industrial Electronics, neurocomputing, etc. This book can be used as a reference book for researcher and designer of the robotic systems and AI based controllers, and can also be used as a reference book for senior undergraduate and graduate students in colleges and universities

Motion Planning for Manipulation With Heuristic Search

Heuristic searches such as A* search are a popular means of finding least-cost plans due to their generality, strong theoretical guarantees on completeness and optimality, simplicity in implementation, and consistent behavior. In planning for robotic manipulation, however, these techniques are commonly thought of as impractical due to the high-dimensionality of the planning problem. As part of this thesis work, we have developed a heuristic search-based approach to motion planning for manipulation that does deal effectively with the high-dimensionality of the problem. In this thesis, I will present the approach together with its theoretical properties and show how to apply it to single-arm and dual-arm motion planning with upright constraints on a PR2 robot operating in non-trivial cluttered spaces. Then I will explain how we extended our approach to manipulation planning for n-arms with regrasping. In this work, the planner itself makes all of the discrete decisions, including which arm to use for the pickup and putdown, whether handoffs are necessary and how the object should be grasped at each step along the way. An extensive experimental analysis in both simulation and on a physical PR2 shows that, in terms of runtime, our approach is on par with some of the most common sampling-based approaches. This includes benchmarking our planning framework on two domains that we constructed that are common to manufacturing: pick-and-place of fast moving objects and the autonomous assembly of small objects. Between these applications, the planner exhibited fast planning times and the ability to robustly plan paths into and out of tight working environments that are common to assembly. The closing work of this thesis includes an exhaustive study of the natural tradeoff that occurs between planning efficiency versus solution quality for different values of the heuristic inflation factor. A comparison of the solution quality of our planner to paths computed by an asymptotically optimal approach given a great deal of time for path optimization is included as well. Finally, a set of experimental results are included that show that due to our approach\u27s deterministic cost-minimization, similar input tends to lead to similarity in the output. This kind of local consistency is important to the predictability of the robot\u27s motions and contributes to human-robot safety