1,230 research outputs found

    A comparison of remotely-sensed and inventory datasets for burned area in Mediterranean Europe

    Get PDF
    Quantitative estimate of observational uncertainty is an essential ingredient to correctly interpret changes in climatic and environmental variables such as wildfires. In this work we compare four state-of-the-art satellite fire products with the gridded, ground-based EFFIS dataset for Mediterranean Europe and analyse their statistical differences. The data are compared for spatial and temporal similarities at different aggregations to identify a spatial scale at which most of the observations provide equivalent results. The results of the analysis indicate that the datasets show high temporal correlation with each other (0.5/0.6) when aggregating the data at resolution of at least 1.0° or at NUTS3 level. However, burned area estimates vary widely between datasets. Filtering out satellite fires located on urban and crop land cover classes greatly improves the agreement with EFFIS data. Finally, in spite of the differences found in the area estimates, the spatial pattern is similar for all the datasets, with spatial correlation increasing as the resolution decreases. Also, the general reasonable agreement between satellite products builds confidence in using these datasets and in particular the most-recent developed dataset, FireCCI51, shows the best agreement with EFFIS overall. As a result, the main conclusion of the study is that users should carefully consider the limitations of the satellite fire estimates currently available, as their uncertainties cannot be neglected in the overall uncertainty estimate/cascade that should accompany global or regional change studies and that removing fires on human-dominated land areas is key to analyze forest fires estimation from satellite products.The authors thank EFFIS (European Forest Fire Information System of the European Commission Joint Research Centre, http://effis.jrc.ec.europa.eu) for providing access to fire series EFFIS. M.T. and E.T. have received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 740073 (CLIM4CROP project) and grant agreement No. 748750 (SPFireSD project), respectively. The work of A.P. has been supported by the European Union's Horizon 2020 ECOPOTENTIAL project (grant agreement No. 641762)

    Understanding fire regimes in Europe

    Get PDF
    Wildland fire effects are strongly associated with fire regime characteristics. Here, we developed the first European pyrogeography based on different fire regime components to better understand fire regimes across the continent. We identified four large-scale pyroregions: a non-fire-prone (NFP) pyroregion featuring nominal fire activity across central and northern Europe; a cool-season fire (CSF) pyroregion scattered throughout Europe; a fire-prone (FP) pyroregion extending mostly across southern Europe; and a highly fire-prone (HFP) pyroregion spanning across northern Portugal, Sicily, and western Balkans. Land cover analysis indicates that pyroregions were first shaped by vegetation and then by anthropogenic factors. On interannual timescales the spatial extent of pyroregions was found to vary, with NFP showing more stability. Interannual correlations between climate and burned area, fire frequency, and the length of fire period exhibited distinct patterns, strengthening in fire-prone pyroregions (FP and HFP) and weakening in NFP and CSF. Proportion of cool-season fires and large fires were related to fuel accumulation in fire-prone pyroregions. Overall, our findings indicate that such a pyrogeography should allow a more accurate estimate of the effects of climate on fire regimes while providing an appropriate framework to better understand fire in Europ

    Remote sensing for the Spanish forests in the 21st century: a review of advances, needs, and opportunities

    Get PDF
    [EN] Forest ecosystems provide a host of services and societal benefits, including carbon storage, habitat for fauna, recreation, and provision of wood or non-wood products. In a context of complex demands on forest resources, identifying priorities for biodiversity and carbon budgets require accurate tools with sufficient temporal frequency. Moreover, understanding long term forest dynamics is necessary for sustainable planning and management. Remote sensing (RS) is a powerful means for analysis, synthesis, and report, providing insights and contributing to inform decisions upon forest ecosystems. In this communication we review current applications of RS techniques in Spanish forests, examining possible trends, needs, and opportunities offered by RS in a forestry context. Currently, wall-to-wall optical and LiDAR data are extensively used for a wide range of applications-many times in combination-whilst radar or hyperspectral data are rarely used in the analysis of Spanish forests. Unmanned Aerial Vehicles (UAVs) carrying visible and infrared sensors are gaining ground in acquisition of data locally and at small scale, particularly for health assessments. Forest fire identification and characterization are prevalent applications at the landscape scale, whereas structural assessments are the most widespread analyses carried out at limited extents. Unparalleled opportunities are offered by the availability of diverse RS data like those provided by the European Copernicus programme and recent satellite LiDAR launches, processing capacity, and synergies with other ancillary sources to produce information of our forests. Overall, we live in times of unprecedented opportunities for monitoring forest ecosystems with a growing support from RS technologies.Part of this work was funded by the Spanish Ministry of Science, innovation and University through the project AGL2016-76769-C2-1-R "Influence of natural disturbance regimes and management on forests dynamics. structure and carbon balance (FORESTCHANGE)".Gómez, C.; Alejandro, P.; Hermosilla, T.; Montes, F.; Pascual, C.; Ruiz Fernández, LÁ.; Álvarez-Taboada, F.... (2019). Remote sensing for the Spanish forests in the 21st century: a review of advances, needs, and opportunities. Forest Systems. 28(1):1-33. https://doi.org/10.5424/fs/2019281-14221S133281Ungar S, Pearlman J, Mendenhall J, Reuter D, 2003. Overview of the Earth Observing-1 (EO-1) mission. IEEE T Geosci Remote 41: 1149−1159.Valbuena R, Mauro F, Arjonilla FJ, Manzanera JA, 2011. Comparing Airborne Laser Scanning-Imagery Fusion Methods Based on Geometric Accuracy in Forested Areas. Remote Sens Environ 115(8): 1942-1956.Valbuena R, Mauro F, Rodríguez-Solano R, Manzanera JA, 2012. Partial Least Squares for Discriminating Variance Components in GNSS Accuracy Obtained Under Scots Pine Canopies. Forest Sci 58(2): 139-153.Valbuena R, De Blas A, Martín Fernández S, Maltamo M, Nabuurs GJ, Manzanera JA, 2013a. Within-Species Benefits of Back-projecting Laser Scanner and Multispectral Sensors in Monospecific P. sylvestris Forests. Eur J Remote Sens 46: 401-416.Valbuena R, Maltamo M, Martín-Fernández S, Packalen P, Pascual C, Nabuurs G-J, 2013b. Patterns of covariance between airborne laser scanning metrics and Lorenz curve descriptors of tree size inequality. Can J Remote Sens 39(1): 18-31.Valbuena R, Packalen P, García-Abril A, Mehtätalo L, Maltamo M, 2013c. Characterizing Forest Structural Types and Shelterwood Dynamics from Lorenz-based Indicators Predicted by Airborne Laser Scanning. Can J For Res 43: 1063-1074.Valbuena R, Maltamo M, Packalen P, 2016a. Classification of Multi-Layered Forest Development Classes from Low-Density National Airborne LiDAR Datasets. Forestry 89: 392-341.Valbuena R, Maltamo M, Packalen P, 2016b. Classification of Forest Development Stages from National Low-Density LiDAR Datasets: a Comparison of Machine Learning Methods. Revista de Teledetección 45: 15-25.Valbuena R, Hernando A, Manzanera JA, Martínez-Falero E, García-Abril A, Mola-Yudego B, 2017a. Most Similar Neighbour Imputation of Forest Attributes Using Metrics Derived from Combined Airborne LIDAR and Multispectral Sensors. Int J Digit Earth 11 (12): 1205-1218.Valbuena R, Hernando A, Manzanera JA, Görgens EB, Almeida DRA, Mauro F, García-Abril A, Coomes DA, 2017b. Enhancing of accuracy assessment for forest above-ground biomass estimates obtained from remote sensing via hypothesis testing and overfitting evaluation. Eco Mod 622: 15-26.Valbuena-Rabadán M, Santamaría-Pe-a J, Sanz-Adán F, 2016. Estimation of diameter and height of individual trees for Pinus sylvestris L. based on the individualising of crowns using airborne LiDAR and the National Forest Inventory data. For Sys 25(1): e046Varo-Martínez MA, Navarro-Cerrillo RM, Hernández-Clemente R, Duque-Lazo J, 2017. Semi-automated stand delineation in Mediterranean Pinus sylvestris plantations through segmentation of LiDAR data: The influence of pulse density. Int J Appl Earth Obs 56: 54-64.Vázquez de la Cueva A, 2008. Structural attributes of three forest types in central Spain and Landsat ETM+ information evaluated with redundancy analysis. Int J Remote Sens 29: 5657-5676.Verdú F, Salas J, 2010. Cartografía de áreas quemadas mediante análisis visual de imágenes de satélite en la Espa-a peninsular para el periodo 1991–2005. Geofocus 10: 54–81.Viana-Soto A, Aguado I, Martínez S, 2017. Assessment of post-fire vegetation recovery using fire severity and geographical data in the Mediterranean region (Spain). Environments 4: 90.Vicente-Serrano SG, Pérez-Cabello F, Lasanta T, 2011. Pinus halepensis regeneration after a wildfire in a semiarid environment: assessment using multitemporal Landsat images. Int J Wildland Fire 20Ñ 195-208.Viedma O, Quesada J, Torres I, De Santis A, Moreno JM, 2015. Fire severity in a large fire in a Pinus pinaster forest is highly predictable from burning conditions, stand structure, and topography. Ecosystems 18: 237-250.Yebra M, Chuvieco E, 2009. Generation of a species-specific look-up table for fuel moisture content assessment. IEEE J Selected topics in applied earth observation and RS 2 (1): 21-26.White JC, Wulder MA, Varhola A, Vastaranta M, Coops NC, Cook BD, Pitt D, Woods M, 2013. A best practices guide for generating forest inventory attributes from airborne laser scanning data using an area-based approach. Natural Resources Canada, Canadian Forest Service, Canadian Wood Fibre Centre, Victoria, BC. Information Report FI-X-010, 39 pp.White JC, Wulder MA, Hobart GW, Luther JE, Hermosilla T, Griffiths P, Coops NC, Hall RJ, Hostert P, Dyk A, Guindon L, 2014. Pixel-based image compositing for large-area dense time series applications and science. Can J Remote Sens 40 (3): 192-212.White JC, Coops NC, Wulder MA, Vastaranta M, Hilker T, Tompalski P, 2016. Remote sensing technologies for enhancing forest inventories: a review. Can J Remote Sens 42: 619-641.White JC, Wulder MA, Hermosilla T, Coops NC, Hobart GW, 2017. A nationwide characterization of 25 years of forest disturbance and recovery for Canada using Landsat time series. Remote Sens Environ 194: 303-321.Wulder MA, 1998. Optical remote-sensing techniques for the assessment of forest inventory and biophysical parameters. Progr Phys Geog 22 (4): 449-476.Wulder MA, Dymond CC, 2004. Remote sensing in survey of Mountain Pine impacts: review and recommendations. MPBI Report. Canadian Forest Service. Natural Resources Canada, Victoria, BC, Canada. 89 pp.Wulder MA, Masek JG, Cohen WB, Loveland TR, Woodcock CE, 2012. Opening the archive: how free data has enabled the science and monitoring promise of Landsat. Remote Sens Environ 122: 2-10.Wulder MA, Hilker T, White JC, Coops NC, Masek JG, Pflugmacher D, Crevier Y, 2015. Virtual constellations for global terrestrial monitoring. Remote Sens Environ 170: 62-76.Wulder MA, White JC, Loveland TR, Woodcock CE, Belward AS, Cohen WB, Fosnight EA, Shaw J, Masek JG, Roy DP, 2016. The global Landsat archive: Status, consolidation, and direction. Remote Sens Environ 185: 271-283.Xie Q, Zhu J, Wang Ch, Fu H, López-Sánchez JM, Ballester-Berman JD, 2017. A modified dual-baseline PolInSAR method for forest height estimation. Remote Sens-Basel 9 (8): 819.Xie Y, Sha Z, Yu M, 2008. Remote sensing imagery in vegetation mapping: a review. J Plant Ecol 1 (1): 9-23.Zald HSJ, Wulder MA, White JC, Hilker T, Hermosilla T, Hobart GW, Coops NC, 2016. Integrating Landsat pixel composites and change metrics with LiDAR plots to predictively map forest structure and aboveground biomass in Saskatchewan, Canada. Remote Sens Environ 176: 188-201.Zarco-Tejada PJ, Diaz-Varela R, Angileri V, Loudjani P, 2014. Tree height quantification using very high resolution imagery acquired from an unmanned aerial vehicle (UAV) and automatic 3D photo-reconstruction methods. Eur J Agron 55: 89-99.Zarco-Tejada PJ, Hornero A, Hernández-Clemente R, Beck PSA, 2018. Understanding the temporal dimension of the red-edge spectral region for forest decline detection using high-resolution hyperspectral and Sentinel-2A imagery. ISPRS J Photogramm 137: 134-148

    The role of remote sensing in assessing the impact of climate variability on vegetation dynamics in Europe

    Get PDF
    Tese de doutoramento em Ciências Geofísicas e da Geoinformação (Detecção Remota), apresentada à Universidade de Lisboa através da Faculdade de Ciências, 2008The study aims at investigating the relationship between climate variability and vegetation dynamics by combining meteorological and remote-sensed information. The vegetation response to both precipitation and temperature in two contrasting areas (Northeastern Europe and the Iberian Peninsula) of the European continent is analysed and special attention is devoted to the impact of the North Atlantic Oscillation (NAO) on the vegetative cycle in the two regions which is assessed taking into account the different land cover types and the respective responses to climate variability. An analysis is performed of the impact of climate variability on wheat yield in Portugal and. the role of NAO and of relevant meteorological variables (net solar radiation, temperature and precipitation) is investigated. Using spring NDVI and NAO in June as predictors, a simple regression model of wheat yield is built up that shows a general good agreement between observed and modelled wheat yield values. The severity of a given drought episode in Portugal is assessed by evaluating the cumulative impact over time of negative anomalies of NDVI. Special attention is devoted to the drought episodes of 1999, 2002 and 2005. While in the case of the drought episode of 1999 the scarcity of water in the soil persisted until spring, the deficit in greenness in 2005 was already apparent at the end of summer. Although the impact of dry periods on vegetation is clearly noticeable in both arable land and forest, the latter vegetation type shows a higher sensitivity to drought conditions. Persistence of negative anomalies of NDVI was also used to develop a procedure aiming to identify burned scars in Portugal and then assess vegetation recovery over areas stricken by large wildfires. The vulnerability of land cover to wildfire is assessed and a marked contrast is found between forest and shrubland vs. arable land and crops. Vegetation recovery reveals to strongly depend on meteorological conditions of the year following the fire event, being especially affected in case of a drought event.Fundação para a Ciência e Tecnologia (FCT), (SFRH/BD/32829/2006

    Using Pre-Fire High Point Cloud Density LiDAR Data to Predict Fire Severity in Central Portugal

    Get PDF
    [EN], The wall-to-wall prediction of fuel structural characteristics conducive to high fire severity is essential to provide integrated insights for implementing pre-fire management strategies designed to mitigate the most harmful ecological effects of fire in fire-prone plant communities. Here, we evaluate the potential of high point cloud density LiDAR data from the Portuguese áGiLTerFoRus project to characterize pre-fire surface and canopy fuel structure and predict wildfire severity. The study area corresponds to a pilot LiDAR flight area of around 21,000 ha in central Portugal intersected by a mixed-severity wildfire that occurred one month after the LiDAR survey. Fire severity was assessed through the differenced Normalized Burn Ratio (dNBR) index computed from pre- and post-fire Sentinel-2A Level 2A scenes. In addition to continuous data, fire severity was also categorized (low or high) using appropriate dNBR thresholds for the plant communities in the study area. We computed several metrics related to the pre-fire distribution of surface and canopy fuels strata with a point cloud mean density of 10.9 m−2. The Random Forest (RF) algorithm was used to evaluate the capacity of the set of pre-fire LiDAR metrics to predict continuous and categorized fire severity. The accuracy of RF regression and classification model for continuous and categorized fire severity data, respectively, was remarkably high (pseudo-R2 = 0.57 and overall accuracy = 81%) considering that we only focused on variables related to fuel structure and loading. The pre-fire fuel metrics with the highest contribution to RF models were proxies for horizontal fuel continuity (fractional cover metric) and the distribution of fuel loads and canopy openness up to a 10 m height (density metrics), indicating increased fire severity with higher surface fuel load and higher horizontal and vertical fuel continuity. Results evidence that the technical specifications of LiDAR acquisitions framed within the áGiLTerFoRus project enable accurate fire severity predictions through point cloud data with high density.SIPortuguese Foundation for Science and Technolog

    Combining ASTER multispectral imagery analysis and support vector machines for rapid and cost-effective post-fire assessment: a case study from the Greek wildland fires of 2007

    Get PDF
    Remote sensing is increasingly being used as a cost-effective and practical solution for the rapid evaluation of impacts from wildland fires. The present study investigates the use of the support vector machine (SVM) classification method with multispectral data from the Advanced Spectral Emission and Reflection Radiometer (ASTER) for obtaining a rapid and cost effective post-fire assessment in a Mediterranean setting. A further objective is to perform a detailed intercomparison of available burnt area datasets for one of the most catastrophic forest fire events that occurred near the Greek capital during the summer of 2007. For this purpose, two ASTER scenes were acquired, one before and one closely after the fire episode. Cartography of the burnt area was obtained by classifying each multi-band ASTER image into a number of discrete classes using the SVM classifier supported by land use/cover information from the CORINE 2000 land nomenclature. Overall verification of the derived thematic maps based on the classification statistics yielded results with a mean overall accuracy of 94.6% and a mean Kappa coefficient of 0.93. In addition, the burnt area estimate derived from the post-fire ASTER image was found to have an average difference of 9.63% from those reported by other operationally-offered burnt area datasets available for the test region

    Fuel Type Classification Using Airborne Laser Scanning and Sentinel 2 Data in Mediterranean Forest Affected by Wildfires

    Get PDF
    Mediterranean forests are recurrently affected by fire. The recurrence of fire in such environments and the number and severity of previous fire events are directly related to fire risk. Fuel type classification is crucial for estimating ignition and fire propagation for sustainable forest management of these wildfire prone environments. The aim of this study is to classify fuel types according to Prometheus classification using low-density Airborne Laser Scanner (ALS) data, Sentinel 2 data, and 136 field plots used as ground-truth. The study encompassed three different Mediterranean forests dominated by pines (Pinus halepensis, P. pinaster y P. nigra), oaks (Quercus ilex) and quercus (Q. faginea) in areas affected by wildfires in 1994 and their surroundings. Two metric selection approaches and two non-parametric classification methods with variants were compared to classify fuel types. The best-fitted classification model was obtained using Support Vector Machine method with radial kernel. The model includes three ALS and one Sentinel-2 metrics: the 25th percentile of returns height, the percentage of all returns above mean, rumple structural diversity index and NDVI. The overall accuracy of the model after validation was 59%. The combination of data from active and passive remote sensing sensors as well as the use of adapted structural diversity indices derived from ALS data improved accuracy classification. This approach demonstrates its value for mapping fuel type spatial patterns at a regional scale under different heterogeneous and topographically complex Mediterranean forests

    Thermally enhanced spectral indices to discriminate burn severity in Mediterranean forest ecosystems

    Get PDF
    P. 1-8Fires are a problematic and recurrent issue in Mediterranean forest ecosystems. Accurate discrimination of burn severity level is fundamental for the rehabilitation planning of affected areas. Though fieldwork is still necessary for measuring post-fire burn severity, remote sensing based techniques are being widely used to predict it because of their computational simplicity and straightforward application. Among them, spectral indices classification (especially difference Normalized Burn Ratio–dNBR- based ones) may be considered the standard remote sensing based method to distinguish burn severity level. In this work we show how this methodology may be improved by using land surface temperature (LST) to enhance the standard spectral indices. We considered a large wildfire in August 2012 in North Western Spain. The Composite Burn Index (CBI) was measured in 111 field plots and grouped into three burn severity levels. Relationship between Landsat 7 Enhanced Thematic Mapper (ETM+) LST-enhanced spectral indices and CBI was evaluated by using the normalized distance between two burn severity levels and spectral dispersion graphs. Inclusion of LST in the spectral index equation resulted in higher discrimination between burn severity levels than standard spectral indices (0.90, 8.50, and 17.52 NIR-SWIR Temperature version 1 vs 0.60, 2.83, and 6.46 NBR). Our results demonstrate the potential of LST for improving burn severity discrimination and mapping. Future research, however, is needed to evaluate the performance of the proposed LST-enhanced spectral indices in other fire regimes, and forest ecosystems.S

    Evaluation of Prescribed Fires from Unmanned Aerial Vehicles (UAVs) Imagery and Machine Learning Algorithms

    Get PDF
    Producción CientíficaPrescribed fires have been applied in many countries as a useful management tool to prevent large forest fires. Knowledge on burn severity is of great interest for predicting post-fire evolution in such burned areas and, therefore, for evaluating the efficacy of this type of action. In this research work, the severity of two prescribed fires that occurred in “La Sierra de Uría” (Asturias, Spain) in October 2017, was evaluated. An Unmanned Aerial Vehicle (UAV) with a Parrot SEQUOIA multispectral camera on board was used to obtain post-fire surface reflectance images on the green (550 nm), red (660 nm), red edge (735 nm), and near-infrared (790 nm) bands at high spatial resolution (GSD 20 cm). Additionally, 153 field plots were established to estimate soil and vegetation burn severity. Severity patterns were explored using Probabilistic Neural Networks algorithms (PNN) based on field data and UAV image-derived products. PNN classified 84.3% of vegetation and 77.8% of soil burn severity levels (overall accuracy) correctly. Future research needs to be carried out to validate the efficacy of this type of action in other ecosystems under different climatic conditions and fire regimes.Ministerio de Economía, Industria y Competitividad - Fondo Europeo de Desarrollo Regional (project AGL2017-86075-C2-1-R)Junta de Castilla y León (project LE001P17
    corecore