Logic synthesis and testing techniques for switching nano-crossbar arrays

Beyond CMOS, new technologies are emerging to extend electronic systems with features unavailable to silicon-based devices. Emerging technologies provide new logic and interconnection structures for computation, storage and communication that may require new design paradigms, and therefore trigger the development of a new generation of design automation tools. In the last decade, several emerging technologies have been proposed and the time has come for studying new ad-hoc techniques and tools for logic synthesis, physical design and testing. The main goal of this project is developing a complete synthesis and optimization methodology for switching nano-crossbar arrays that leads to the design and construction of an emerging nanocomputer. New models for diode, FET, and four-terminal switch based nanoarrays are developed. The proposed methodology implements logic, arithmetic, and memory elements by considering performance parameters such as area, delay, power dissipation, and reliability. With combination of logic, arithmetic, and memory elements a synchronous state machine (SSM), representation of a computer, is realized. The proposed methodology targets variety of emerging technologies including nanowire/nanotube crossbar arrays, magnetic switch-based structures, and crossbar memories. The results of this project will be a foundation of nano-crossbar based circuit design techniques and greatly contribute to the construction of emerging computers beyond CMOS. The topic of this project can be considered under the research area of â\u80\u9cEmerging Computing Modelsâ\u80\u9d or â\u80\u9cComputational Nanoelectronicsâ\u80\u9d, more specifically the design, modeling, and simulation of new nanoscale switches beyond CMOS

2022 roadmap on neuromorphic computing and engineering

Modern computation based on von Neumann architecture is now a mature cutting-edge science. In the von Neumann architecture, processing and memory units are implemented as separate blocks interchanging data intensively and continuously. This data transfer is responsible for a large part of the power consumption. The next generation computer technology is expected to solve problems at the exascale with 10$^{18}$ calculations each second. Even though these future computers will be incredibly powerful, if they are based on von Neumann type architectures, they will consume between 20 and 30 megawatts of power and will not have intrinsic physically built-in capabilities to learn or deal with complex data as our brain does. These needs can be addressed by neuromorphic computing systems which are inspired by the biological concepts of the human brain. This new generation of computers has the potential to be used for the storage and processing of large amounts of digital information with much lower power consumption than conventional processors. Among their potential future applications, an important niche is moving the control from data centers to edge devices. The aim of this roadmap is to present a snapshot of the present state of neuromorphic technology and provide an opinion on the challenges and opportunities that the future holds in the major areas of neuromorphic technology, namely materials, devices, neuromorphic circuits, neuromorphic algorithms, applications, and ethics. The roadmap is a collection of perspectives where leading researchers in the neuromorphic community provide their own view about the current state and the future challenges for each research area. We hope that this roadmap will be a useful resource by providing a concise yet comprehensive introduction to readers outside this field, for those who are just entering the field, as well as providing future perspectives for those who are well established in the neuromorphic computing community

Embedding Logic and Non-volatile Devices in CMOS Digital Circuits for Improving Energy Efficiency

abstract: Static CMOS logic has remained the dominant design style of digital systems for more than four decades due to its robustness and near zero standby current. Static CMOS logic circuits consist of a network of combinational logic cells and clocked sequential elements, such as latches and flip-flops that are used for sequencing computations over time. The majority of the digital design techniques to reduce power, area, and leakage over the past four decades have focused almost entirely on optimizing the combinational logic. This work explores alternate architectures for the flip-flops for improving the overall circuit performance, power and area. It consists of three main sections. First, is the design of a multi-input configurable flip-flop structure with embedded logic. A conventional D-type flip-flop may be viewed as realizing an identity function, in which the output is simply the value of the input sampled at the clock edge. In contrast, the proposed multi-input flip-flop, named PNAND, can be configured to realize one of a family of Boolean functions called threshold functions. In essence, the PNAND is a circuit implementation of the well-known binary perceptron. Unlike other reconfigurable circuits, a PNAND can be configured by simply changing the assignment of signals to its inputs. Using a standard cell library of such gates, a technology mapping algorithm can be applied to transform a given netlist into one with an optimal mixture of conventional logic gates and threshold gates. This approach was used to fabricate a 32-bit Wallace Tree multiplier and a 32-bit booth multiplier in 65nm LP technology. Simulation and chip measurements show more than 30% improvement in dynamic power and more than 20% reduction in core area. The functional yield of the PNAND reduces with geometry and voltage scaling. The second part of this research investigates the use of two mechanisms to improve the robustness of the PNAND circuit architecture. One is the use of forward and reverse body biases to change the device threshold and the other is the use of RRAM devices for low voltage operation. The third part of this research focused on the design of flip-flops with non-volatile storage. Spin-transfer torque magnetic tunnel junctions (STT-MTJ) are integrated with both conventional D-flipflop and the PNAND circuits to implement non-volatile logic (NVL). These non-volatile storage enhanced flip-flops are able to save the state of system locally when a power interruption occurs. However, manufacturing variations in the STT-MTJs and in the CMOS transistors significantly reduce the yield, leading to an overly pessimistic design and consequently, higher energy consumption. A detailed analysis of the design trade-offs in the driver circuitry for performing backup and restore, and a novel method to design the energy optimal driver for a given yield is presented. Efficient designs of two nonvolatile flip-flop (NVFF) circuits are presented, in which the backup time is determined on a per-chip basis, resulting in minimizing the energy wastage and satisfying the yield constraint. To achieve a yield of 98%, the conventional approach would have to expend nearly 5X more energy than the minimum required, whereas the proposed tunable approach expends only 26% more energy than the minimum. A non-volatile threshold gate architecture NV-TLFF are designed with the same backup and restore circuitry in 65nm technology. The embedded logic in NV-TLFF compensates performance overhead of NVL. This leads to the possibility of zero-overhead non-volatile datapath circuits. An 8-bit multiply-and- accumulate (MAC) unit is designed to demonstrate the performance benefits of the proposed architecture. Based on the results of HSPICE simulations, the MAC circuit with the proposed NV-TLFF cells is shown to consume at least 20% less power and area as compared to the circuit designed with conventional DFFs, without sacrificing any performance.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Double-gate single electron transistor : modeling, design & evaluation of logic architectures

Dans les années à venir, l'industrie de la microélectronique doit développer de nouvelles filières technologiques qui pourront devenir des successeurs ou des compléments de la technologie CMOS ultime. Parmi ces technologies émergentes relevant du domaine « Beyond CMOS », ce travail de recherche porte sur les transistors mono-électroniques (SET) dont le fonctionnement est basé sur la quantification de la charge électrique, le transport quantique et la répulsion Coulombienne. Les SETs doivent être étudiés à trois niveaux : composants, circuits et système. Ces nouveaux composants, utilisent à leur profit le phénomène dit de blocage de Coulomb permettant le transit des électrons de manière séquentielle, afin de contrôler très précisément le courant véhiculé. En effet, l'émergence du caractère granulaire de la charge électrique dans le transport des électrons par effet tunnel, permet d'envisager la réalisation de remplaçants potentiels des transistors ou de cellules mémoire à haute densité d'intégration, basse consommation. L'objectif principal de ce travail de thèse est d'explorer et d'évaluer le potentiel des transistors mono-électroniques double-grille métalliques (DG-SETs) pour les circuits logiques numériques. De ce fait, les travaux de recherches proposés sont divisés en trois parties : i) le développement des outils de simulation et tout particulièrement un modèle analytique de DG-SET ; ii) la conception de circuits numériques à base de DG-SETs dans une approche « cellules standards » ; et iii) l'exploration d'architectures logiques versatiles à base de DG-SETs en exploitant la double-grille du dispositif. Un modèle analytique pour les DG-SETs métalliques fonctionnant à température ambiante et au-delà est présenté. Ce modèle est basé sur des paramètres physiques et géométriques et implémenté en langage Verilog-A. Il est utilisable pour la conception de circuits analogiques ou numériques hybrides SET-CMOS. A l'aide de cet outil, nous avons conçu, simulé et évalué les performances de circuits logiques à base de DG-SETs afin de mettre en avant leur utilisation dans les futurs circuits ULSI. Une bibliothèque de cellules logiques, à base de DG-SETs, fonctionnant à haute température est présentée. Des résultats remarquables ont été atteints notamment en termes de consommation d'énergie. De plus, des architectures logiques telles que les blocs élémentaires pour le calcul (ALU, SRAM, etc.) ont été conçues entièrement à base de DG-SETs. La flexibilité offerte par la seconde grille du DG-SET a permis de concevoir une nouvelle famille de circuits logiques flexibles à base de portes de transmission. Une réduction du nombre de transistors par fonction et de consommation a été atteinte. Enfin, des analyses Monte-Carlo sont abordées afin de déterminer la robustesse des circuits logiques conçus à l'égard des dispersions technologiques