Frequency Reconfigurable Circular Patch Antenna with an Arc-Shaped Slot Ground Controlled by PIN Diodes

© Copyright 2017 Yao Chen et al. In this paper, a compact frequency reconfigurable circular patch antenna with an arc-shaped slot loaded in the ground layer is proposed for multiband wireless communication applications. By controlling the ON/OFF states of the five PIN diodes mounted on the arc-shaped slot, the effective length of the arc-shaped slot and the effective length of antennas current are changed, and accordingly six-frequency band reconfiguration can be achieved. The simulated and measured results show that the antenna can operate from 1.82 GHz to 2.46 GHz, which is located in DCS1800 (1.71-1.88 GHz), UMTS (2.11-2.20 GHz), WiBro (2.3-2.4 GHz), and Bluetooth (2.4-2.48 GHz) frequency bands and so forth. Compared to the common rectangular slot circular patch antenna, the proposed arc-shaped slot circular patch antenna not only has a better rotational symmetry with the circular patch and substrate but also has more compact size. For the given operating frequency at 1.82 GHz, over 55% area reduction is achieved in this design with respect to the common design with rectangular slot. Since the promising frequency reconfiguration, this antenna may have potential applications in modern multiband and multifunctional mobile communication systems

Compact printed multiband antenna with independent setting suitable for fixed and reconfigurable wireless communication systems

This is the author's accepted manuscript. The final published article is available from the link below. Copyright @ 2012 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.This paper presents the design of a low-profile compact printed antenna for fixed frequency and reconfigurable frequency bands. The antenna consists of a main patch, four sub-patches, and a ground plane to generate five frequency bands, at 0.92, 1.73, 1.98, 2.4, and 2.9 GHz, for different wireless systems. For the fixed-frequency design, the five individual frequency bands can be adjusted and set independently over the wide ranges of 18.78%, 22.75%, 4.51%, 11%, and 8.21%, respectively, using just one parameter of the antenna. By putting a varactor (diode) at each of the sub-patch inputs, four of the frequency bands can be controlled independently over wide ranges and the antenna has a reconfigurable design. The tunability ranges for the four bands of 0.92, 1.73, 1.98, and 2.9 GHz are 23.5%, 10.30%, 13.5%, and 3%, respectively. The fixed and reconfigurable designs are studied using computer simulation. For verification of simulation results, the two designs are fabricated and the prototypes are measured. The results show a good agreement between simulated and measured results

A Compact Tri-band Printed Antenna for MIMO Applications

In this paper, a compact tri-band printed multi-input multi-output (MIMO) antenna with high isolation is presented to operate within WLAN and WiMAX frequency bands. By adopting a rectangular open-ended slot combined with a rectangular strip with an inverted L-shaped open-ended slot, three operating frequency bands can be obtained. The proposed compact MIMO antenna occupies an overall size of 19×33 mm2. Good port-to-port isolation is obtained. The simulated and measured results show that the presented antenna is suitable for multiband MIMO applications

A Multiband CPW-Fed Slot Antenna with Fractal Stub and Parasitic Line

This paper presents a multiband CPW-fed slot antenna with fractal stub and parasitic line. The conventional wideband slot antenna with fractal stub is modified by inserting the parasitic line surrounding the fractal stub that affects the attribution to be a multiband operation suitable for some applications in wireless communication systems. The parasitic line surrounding the fractal stub can generate a dual-notched frequency that can be controlled by varying the parameters of the parasitic structure. The lengths of slit and stub on both sides of the parasitic line can control the lower and higher notched frequencies, respectively. Additionally, the prototype of the proposed antenna can operate and cover the applications of DCS 1800, WiMAX IEEE 802.16, WLAN IEEE 802.11a/b/g, and IMT advance system

A reconfigurable wideband and multiband antenna using dual-patch elements for compact wireless devices

This is the post-print version of the Article. The official published version can be accessed from the link below - Copyright @ 2012 IEEEA reconfigurable wideband and multiband C-Slot patch antenna with dual-patch elements is proposed and studied. It occupies a compact volume of 50 × 50 × 1.57 (3925 mm3), including the ground plane. The antenna can operate in two dual-band modes and a wideband mode from 5 to 7 GHz. Two parallel C-Slots on the patch elements are employed to perturb the surface current paths for excitation of the dual-band and the wideband modes. Two switches, implemented using PIN diodes, are placed on the connecting lines of a simple feed network to the patch elements. Dual-band modes are achieved by switching “ON” either one of the two patch elements, while the wideband mode with an impedance bandwidth of 33.52% is obtained by switching “ON” both patch elements. The frequencies in the dual-band modes can be independently controlled using positions and dimensions of the C-Slots without affecting the wideband mode. The advantage of the proposed antenna is that two dual-band operations and one wideband operation can be achieved using the same dimensions. This overcomes the need for increasing the surface area normally incurred when designing wideband patch antennas. Simulation results are validated experimentally through prototypes. The measured radiation patterns and peak gains show stable responses and are in good agreements. Coupling between the two patch elements plays a major role for achieving the wide bandwidth and the effects of mutual coupling between the patch elements are also studied

Design and Measurements of a Five Independent Band Patch Antenna for Different Wireless Applications

This paper presents the design of a compact microstrip patch antenna with the ability of controlling the number of bands and the operating frequencies independently. Numerical equations are derived using a curve fitting technique to obtain the centre frequency of each band. The antenna comprises a main patch and four sub-patches fed by a 50 microstrip line. It is designed to generate up to five separate modes to cover the frequency range from 900MHz to 3GHz for the operation of wireless devices supporting multiple standards including Global System for Mobile communication (GSM900, 880-960 MHz), Digital Communication System (DCS1800, 1710-1880 MHz), Universal Mobile Telecommunication System (UMTS, 1920-2170 MHz), Wireless Local Area Network (WLAN, 2400-2483.5 MHz) and low band Worldwide Interoperability for Microwave Access (WIMAX, 2.5 to 2.8 GHz).NPL SMART chamber were supported by the Measurements for Innovators (MFI) program and the National Measurement Office, an Executive Agency of the Department for Business, Innovation and Skill

Design of planar inverted-F antennas (PIFA) for multiband wireless applications

A small three bands printed inverted-F antenna with independently controlling the resonant frequency is presented. The proposed antenna consists of two arms supported by shorting walls fed by 50 Ω microstrip transmission line and a ground plane. The antenna occupied a compact size of 26 x 25 x 3.75 mm. The main radiated patch injected with slot and another arm to generate and control the three resonant frequencies to cover 2.4, 3.7 and 5.2GHz Wireless Local Area Network (WLAN) and Worldwide Interoperability for Microwave Access (WiMAX). The simulated and measured results show that the antenna achieves a gain of 2, 3 and 5 dBi respectively and radiation efficiency of 50%, 60% and 85% for the three bands respectively. The simulated and measured result for the return loss is in good agreements

A Novel Planar Fractal Antenna with CPW-Feed for Multiband applications

In this paper, a multiband antenna using a novel fractal design is presented. The antenna structure is formed by inscribing a hexagonal slot within a circle. This base structure is then scaled and arranged within the hexagon along its sides without touching the outer structure. The proposed CPW fed, low profile antenna offers good performance in the 1.65-2.59 GHz, 4.16-4.52 GHz and 5.54-6.42 GHz bands and is suitable for GSM 1800/1900, Bluetooth, IMT advanced system and upper WLAN applications. The antenna has been fabricated on a substrate of height 1.6mm and er=4.4 and simulation and experimental results are found to be in good agreement

Wideband and UWB antennas for wireless applications. A comprehensive review

A comprehensive review concerning the geometry, the manufacturing technologies, the materials, and the numerical techniques, adopted for the analysis and design of wideband and ultrawideband (UWB) antennas for wireless applications, is presented. Planar, printed, dielectric, and wearable antennas, achievable on laminate (rigid and flexible), and textile dielectric substrates are taken into account. The performances of small, low-profile, and dielectric resonator antennas are illustrated paying particular attention to the application areas concerning portable devices (mobile phones, tablets, glasses, laptops, wearable computers, etc.) and radio base stations. This information provides a guidance to the selection of the different antenna geometries in terms of bandwidth, gain, field polarization, time-domain response, dimensions, and materials useful for their realization and integration in modern communication systems