A Breakdown Voltage Multiplier for High Voltage Swing Drivers

A novel breakdown voltage (BV) multiplier is introduced that makes it possible to generate high output voltage swings using transistors with low breakdown voltages. The timing analysis of the stage is used to optimize its dynamic response. A 10 Gb/s optical modulator driver with a differential output voltage swing of 8 V on a 50 Ω load was implemented in a SiGe BiCMOS process. It uses the BV-Doubler topology to achieve output swings twice the collector–emitter breakdown voltage without stressing any single transistor

Power Management ICs for Internet of Things, Energy Harvesting and Biomedical Devices

This dissertation focuses on the power management unit (PMU) and integrated circuits (ICs) for the internet of things (IoT), energy harvesting and biomedical devices. Three monolithic power harvesting methods are studied for different challenges of smart nodes of IoT networks. Firstly, we propose that an impedance tuning approach is implemented with a capacitor value modulation to eliminate the quiescent power consumption. Secondly, we develop a hill-climbing MPPT mechanism that reuses and processes the information of the hysteresis controller in the time-domain and is free of power hungry analog circuits. Furthermore, the typical power-performance tradeoff of the hysteresis controller is solved by a self-triggered one-shot mechanism. Thus, the output regulation achieves high-performance and yet low-power operations as low as 12 µW. Thirdly, we introduce a reconfigurable charge pump to provide the hybrid conversion ratios (CRs) as 1⅓× up to 8× for minimizing the charge redistribution loss. The reconfigurable feature also dynamically tunes to maximum power point tracking (MPPT) with the frequency modulation, resulting in a two-dimensional MPPT. Therefore, the voltage conversion efficiency (VCE) and the power conversion efficiency (PCE) are enhanced and flattened across a wide harvesting range as 0.45 to 3 V. In a conclusion, we successfully develop an energy harvesting method for the IoT smart nodes with lower cost, smaller size, higher conversion efficiency, and better applicability. For the biomedical devices, this dissertation presents a novel cost-effective automatic resonance tracking method with maximum power transfer (MPT) for piezoelectric transducers (PT). The proposed tracking method is based on a band-pass filter (BPF) oscillator, exploiting the PT’s intrinsic resonance point through a sensing bridge. It guarantees automatic resonance tracking and maximum electrical power converted into mechanical motion regardless of process variations and environmental interferences. Thus, the proposed BPF oscillator-based scheme was designed for an ultrasonic vessel sealing and dissecting (UVSD) system. The sealing and dissecting functions were verified experimentally in chicken tissue and glycerin. Furthermore, a combined sensing scheme circuit allows multiple surgical tissue debulking, vessel sealer and dissector (VSD) technologies to operate from the same sensing scheme board. Its advantage is that a single driver controller could be used for both systems simplifying the complexity and design cost. In a conclusion, we successfully develop an ultrasonic scalpel to replace the other electrosurgical counterparts and the conventional scalpels with lower cost and better functionality

High Voltage Energy Harvesters

Green energy helps in reducing carbon emission from fossil fuel, harvesting energy from natural resources like wind to power consumer appliances. To date, many researches have been focusing on designing circuits that harvest energy from electromagnetic signals wirelessly. While it could be designed to be efficient, the generated power however is insufficient to drive large loads. Wind energy is highly available environmentally but development of small-scale energy harvesting apparatus aiming to extract significant power from miniature brushless fan has received limited attention. The aim of this chapter is to give audience an insight of different voltage multipliers used in energy harvester and knowledge on various circuit techniques to configure voltage multipliers for use in different high voltage applications. These include AC-DC converter, AC-AC converter and variable AC-DC converter

Techniques for Frequency Synthesizer-Based Transmitters.

Internet of Things (IoT) devices are poised to be the largest market for the semiconductor industry. At the heart of a wireless IoT module is the radio and integral to any radio is the transmitter. Transmitters with low power consumption and small area are crucial to the ubiquity of IoT devices. The fairly simple modulation schemes used in IoT systems makes frequency synthesizer-based (also known as PLL-based) transmitters an ideal candidate for these devices. Because of the reduced number of analog blocks and the simple architecture, PLL-based transmitters lend themselves nicely to the highly integrated, low voltage nanometer digital CMOS processes of today. This thesis outlines techniques that not only reduce the power consumption and area, but also significantly improve the performance of PLL-based transmitters.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/113385/1/mammad_1.pd

Energy- and Area-Efficient DC-DC Converters Fabricated in Low Temperature Crystalline Silicon-on-Glass Technology

The display industry is moving toward the development of system-on-panel (SOP) architectures to make increasingly compact small-format displays and reduce manufacturing cost. Presently, the voltages required by pixel drivers, row scan logic, and timing circuitry, are generated from a single supply voltage using charge pumps fabricated on a high voltage, monolithic integrated circuit mounted off the glass panel. In this work, a new high-efficiency charge pump architecture for fabrication on display glass substrates is presented. The distinguishing feature of this work is the nestedclock timing scheme used to improve power efficiency and reduce output voltage noise without the use of external capacitors. The circuit is intended for implementation on a novel low-temperature crystalline silicon thin-film transistor technology (SiOG) that exhibits superior performance compared to other low-temperature fabrication processes. Based on simulation results, the proposed circuit exhibits both smaller ripple voltage (61% smaller) and improved power efficiency (80.6% vs. 67.8%) when compared to previous work

A Charge Pump Architecture with High Power-Efficiency and Low Output Ripple Noise in 0.5 μm CMOS Process Technology

The demand of portable consumer electronic devices is skyrocketing day-by-day. Such modern integrated microsystems have several functional blocks which require different voltages to operate adequately. DC-DC converter circuits are used to generate different voltage domains for different functional blocks on large integrated microsystems from a single voltage battery-operated power supply. Charge pump is an inductorless DC-DC converter which generates higher positive voltage or lower voltage or negative voltage from the applied reference voltage. A charge pump circuit uses switches for charge transfer action and capacitors for charge storage. The thesis presents a high power-efficiency charge pump architecture with low output ripple noise in the AMI N-well 0.5 µm CMOS process technology. The switching action of the proposed charge pump architecture is controlled by a dual phase non-overlapping clock system. In order to achieve high power-efficiency, the power losses due to the leakage currents, the finite switch resistance and the imperfect charge transfer between the capacitors are taken into consideration and are minimized by proper switching of the charge transfer switches and by using different auxiliary circuits. To achieve low output ripple noise, the continuous current pumping method is proposed and implemented in the charge pump architecture. The proposed charge pump can operate over the wide input voltage range varying from 3 V to 7 V with the power conversion efficiency of 90%. The loading current drive capability of the proposed charge pump is ranging from 0 to 45 mA. The worst case output ripple voltage is less than 25 mV. To prove the concept, the design of the proposed charge pump is simulated rigorously over different process, temperature and voltage corners

Low power CMOS IC, biosensor and wireless power transfer techniques for wireless sensor network application

The emerging field of wireless sensor network (WSN) is receiving great attention due to the interest in healthcare. Traditional battery-powered devices suffer from large size, weight and secondary replacement surgery after the battery life-time which is often not desired, especially for an implantable application. Thus an energy harvesting method needs to be investigated. In addition to energy harvesting, the sensor network needs to be low power to extend the wireless power transfer distance and meet the regulation on RF power exposed to human tissue (specific absorption ratio). Also, miniature sensor integration is another challenge since most of the commercial sensors have rigid form or have a bulky size. The objective of this thesis is to provide solutions to the aforementioned challenges

Resonant Integrated Nonlinear Photonics for the Development of Compact and Stable Soliton Microcombs

Nonlinear nanophotonic devices are crucial building blocks of a fully integrated photonic system. They enable high-speed, high-throughput and customizable transfer of information, with applications ranging from biology to cutting edge quantum information technologies. A particularly important nanophotonics component is the micro-resonator. Not only do micro-resonators confine light and allow an effective increased length of interaction with a desired material platform, they are also highly compact. Through the amplification of light-matter interaction, nonlinear phenomena such as soliton comb generation, record breaking second and third harmonic generation as well as electro-optic frequency conversion have been observed on an integrated on-chip platform. The work presented here investigates the methods of integration and optimization of many such nonlinear micro-resonators with the ultimate goal of developing the first fully integrated and stabilized soliton microcomb