Virtual viewpoint three-dimensional panorama

Conventional panoramic images are known to provide for an enhanced field of view in which the scene always has a fixed appearance. The idea presented in this paper focuses on the use of the concept of virtual viewpoint creation to generate different panoramic images of the same scene with three-dimensional component. Three-dimensional effect in a resultant panorama is realized by superimposing a stereo-pair of panoramic images

Camera positioning for 3D panoramic image rendering

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University London.Virtual camera realisation and the proposition of trapezoidal camera architecture are the two broad contributions of this thesis. Firstly, multiple camera and their arrangement constitute a critical component which affect the integrity of visual content acquisition for multi-view video. Currently, linear, convergence, and divergence arrays are the prominent camera topologies adopted. However, the large number of cameras required and their synchronisation are two of prominent challenges usually encountered. The use of virtual cameras can significantly reduce the number of physical cameras used with respect to any of the known camera structures, hence adequately reducing some of the other implementation issues. This thesis explores to use image-based rendering with and without geometry in the implementations leading to the realisation of virtual cameras. The virtual camera implementation was carried out from the perspective of depth map (geometry) and use of multiple image samples (no geometry). Prior to the virtual camera realisation, the generation of depth map was investigated using region match measures widely known for solving image point correspondence problem. The constructed depth maps have been compare with the ones generated using the dynamic programming approach. In both the geometry and no geometry approaches, the virtual cameras lead to the rendering of views from a textured depth map, construction of 3D panoramic image of a scene by stitching multiple image samples and performing superposition on them, and computation of virtual scene from a stereo pair of panoramic images. The quality of these rendered images were assessed through the use of either objective or subjective analysis in Imatest software. Further more, metric reconstruction of a scene was performed by re-projection of the pixel points from multiple image samples with a single centre of projection. This was done using sparse bundle adjustment algorithm. The statistical summary obtained after the application of this algorithm provides a gauge for the efficiency of the optimisation step. The optimised data was then visualised in Meshlab software environment, hence providing the reconstructed scene. Secondly, with any of the well-established camera arrangements, all cameras are usually constrained to the same horizontal plane. Therefore, occlusion becomes an extremely challenging problem, and a robust camera set-up is required in order to resolve strongly the hidden part of any scene objects. To adequately meet the visibility condition for scene objects and given that occlusion of the same scene objects can occur, a multi-plane camera structure is highly desirable. Therefore, this thesis also explore trapezoidal camera structure for image acquisition. The approach here is to assess the feasibility and potential of several physical cameras of the same model being sparsely arranged on the edge of an efficient trapezoid graph. This is implemented both Matlab and Maya. The quality of the depth maps rendered in Matlab are better in Quality

Remote Visual Observation of Real Places Through Virtual Reality Headsets

Virtual Reality has always represented a fascinating yet powerful opportunity that has attracted studies and technology developments, especially since the latest release on the market of powerful high-resolution and wide field-of-view VR headsets. While the great potential of such VR systems is common and accepted knowledge, issues remain related to how to design systems and setups capable of fully exploiting the latest hardware advances. The aim of the proposed research is to study and understand how to increase the perceived level of realism and sense of presence when remotely observing real places through VR headset displays. Hence, to produce a set of guidelines that give directions to system designers about how to optimize the display-camera setup to enhance performance, focusing on remote visual observation of real places. The outcome of this investigation represents unique knowledge that is believed to be very beneficial for better VR headset designs towards improved remote observation systems. To achieve the proposed goal, this thesis presents a thorough investigation of existing literature and previous researches, which is carried out systematically to identify the most important factors ruling realism, depth perception, comfort, and sense of presence in VR headset observation. Once identified, these factors are further discussed and assessed through a series of experiments and usability studies, based on a predefined set of research questions. More specifically, the role of familiarity with the observed place, the role of the environment characteristics shown to the viewer, and the role of the display used for the remote observation of the virtual environment are further investigated. To gain more insights, two usability studies are proposed with the aim of defining guidelines and best practices. The main outcomes from the two studies demonstrate that test users can experience an enhanced realistic observation when natural features, higher resolution displays, natural illumination, and high image contrast are used in Mobile VR. In terms of comfort, simple scene layouts and relaxing environments are considered ideal to reduce visual fatigue and eye strain. Furthermore, sense of presence increases when observed environments induce strong emotions, and depth perception improves in VR when several monocular cues such as lights and shadows are combined with binocular depth cues. Based on these results, this investigation then presents a focused evaluation on the outcomes and introduces an innovative eye-adapted High Dynamic Range (HDR) approach, which the author believes to be of great improvement in the context of remote observation when combined with eye-tracked VR headsets. Within this purpose, a third user study is proposed to compare static HDR and eye-adapted HDR observation in VR, to assess that the latter can improve realism, depth perception, sense of presence, and in certain cases even comfort. Results from this last study confirmed the author expectations, proving that eye-adapted HDR and eye tracking should be used to achieve best visual performances for remote observation in modern VR systems

Appearance Modelling and Reconstruction for Navigation in Minimally Invasive Surgery

Minimally invasive surgery is playing an increasingly important role for patient care. Whilst its direct patient benefit in terms of reduced trauma, improved recovery and shortened hospitalisation has been well established, there is a sustained need for improved training of the existing procedures and the development of new smart instruments to tackle the issue of visualisation, ergonomic control, haptic and tactile feedback. For endoscopic intervention, the small field of view in the presence of a complex anatomy can easily introduce disorientation to the operator as the tortuous access pathway is not always easy to predict and control with standard endoscopes. Effective training through simulation devices, based on either virtual reality or mixed-reality simulators, can help to improve the spatial awareness, consistency and safety of these procedures. This thesis examines the use of endoscopic videos for both simulation and navigation purposes. More specifically, it addresses the challenging problem of how to build high-fidelity subject-specific simulation environments for improved training and skills assessment. Issues related to mesh parameterisation and texture blending are investigated. With the maturity of computer vision in terms of both 3D shape reconstruction and localisation and mapping, vision-based techniques have enjoyed significant interest in recent years for surgical navigation. The thesis also tackles the problem of how to use vision-based techniques for providing a detailed 3D map and dynamically expanded field of view to improve spatial awareness and avoid operator disorientation. The key advantage of this approach is that it does not require additional hardware, and thus introduces minimal interference to the existing surgical workflow. The derived 3D map can be effectively integrated with pre-operative data, allowing both global and local 3D navigation by taking into account tissue structural and appearance changes. Both simulation and laboratory-based experiments are conducted throughout this research to assess the practical value of the method proposed

Survey of image-based representations and compression techniques

In this paper, we survey the techniques for image-based rendering (IBR) and for compressing image-based representations. Unlike traditional three-dimensional (3-D) computer graphics, in which 3-D geometry of the scene is known, IBR techniques render novel views directly from input images. IBR techniques can be classified into three categories according to how much geometric information is used: rendering without geometry, rendering with implicit geometry (i.e., correspondence), and rendering with explicit geometry (either with approximate or accurate geometry). We discuss the characteristics of these categories and their representative techniques. IBR techniques demonstrate a surprising diverse range in their extent of use of images and geometry in representing 3-D scenes. We explore the issues in trading off the use of images and geometry by revisiting plenoptic-sampling analysis and the notions of view dependency and geometric proxies. Finally, we highlight compression techniques specifically designed for image-based representations. Such compression techniques are important in making IBR techniques practical.published_or_final_versio

A family of stereoscopic image compression algorithms using wavelet transforms

With the standardization of JPEG-2000, wavelet-based image and video compression technologies are gradually replacing the popular DCT-based methods. In parallel to this, recent developments in autostereoscopic display technology is now threatening to revolutionize the way in which consumers are used to enjoying the traditional 2D display based electronic media such as television, computer and movies. However, due to the two-fold bandwidth/storage space requirement of stereoscopic imaging, an essential requirement of a stereo imaging system is efficient data compression. In this thesis, seven wavelet-based stereo image compression algorithms are proposed, to take advantage of the higher data compaction capability and better flexibility of wavelets. In the proposed CODEC I, block-based disparity estimation/compensation (DE/DC) is performed in pixel domain. However, this results in an inefficiency when DWT is applied on the whole predictive error image that results from the DE process. This is because of the existence of artificial block boundaries between error blocks in the predictive error image. To overcome this problem, in the remaining proposed CODECs, DE/DC is performed in the wavelet domain. Due to the multiresolution nature of the wavelet domain, two methods of disparity estimation and compensation have been proposed. The first method is performing DEJDC in each subband of the lowest/coarsest resolution level and then propagating the disparity vectors obtained to the corresponding subbands of higher/finer resolution. Note that DE is not performed in every subband due to the high overhead bits that could be required for the coding of disparity vectors of all subbands. This method is being used in CODEC II. In the second method, DEJDC is performed m the wavelet-block domain. This enables disparity estimation to be performed m all subbands simultaneously without increasing the overhead bits required for the coding disparity vectors. This method is used by CODEC III. However, performing disparity estimation/compensation in all subbands would result in a significant improvement of CODEC III. To further improve the performance of CODEC ill, pioneering wavelet-block search technique is implemented in CODEC IV. The pioneering wavelet-block search technique enables the right/predicted image to be reconstructed at the decoder end without the need of transmitting the disparity vectors. In proposed CODEC V, pioneering block search is performed in all subbands of DWT decomposition which results in an improvement of its performance. Further, the CODEC IV and V are able to perform at very low bit rates(< 0.15 bpp). In CODEC VI and CODEC VII, Overlapped Block Disparity Compensation (OBDC) is used with & without the need of coding disparity vector. Our experiment results showed that no significant coding gains could be obtained for these CODECs over CODEC IV & V. All proposed CODECs m this thesis are wavelet-based stereo image coding algorithms that maximise the flexibility and benefits offered by wavelet transform technology when applied to stereo imaging. In addition the use of a baseline-JPEG coding architecture would enable the easy adaptation of the proposed algorithms within systems originally built for DCT-based coding. This is an important feature that would be useful during an era where DCT-based technology is only slowly being phased out to give way for DWT based compression technology. In addition, this thesis proposed a stereo image coding algorithm that uses JPEG-2000 technology as the basic compression engine. The proposed CODEC, named RASTER is a rate scalable stereo image CODEC that has a unique ability to preserve the image quality at binocular depth boundaries, which is an important requirement in the design of stereo image CODEC. The experimental results have shown that the proposed CODEC is able to achieve PSNR gains of up to 3.7 dB as compared to directly transmitting the right frame using JPEG-2000

A family of stereoscopic image compression algorithms using wavelet transforms

With the standardization of JPEG-2000, wavelet-based image and video compression technologies are gradually replacing the popular DCT-based methods. In parallel to this, recent developments in autostereoscopic display technology is now threatening to revolutionize the way in which consumers are used to enjoying the traditional 2-D display based electronic media such as television, computer and movies. However, due to the two-fold bandwidth/storage space requirement of stereoscopic imaging, an essential requirement of a stereo imaging system is efficient data compression. In this thesis, seven wavelet-based stereo image compression algorithms are proposed, to take advantage of the higher data compaction capability and better flexibility of wavelets. [Continues.

Localisation and tracking of stationary users for extended reality

In this thesis, we investigate the topics of localisation and tracking in the context of Extended Reality. In many on-site or outdoor Augmented Reality (AR) applications, users are standing or sitting in one place and performing mostly rotational movements, i.e. stationary. This type of stationary motion also occurs in Virtual Reality (VR) applications such as panorama capture by moving a camera in a circle. Both applications require us to track the motion of a camera in potentially very large and open environments. State-of-the-art methods such as Structure-from-Motion (SfM), and Simultaneous Localisation and Mapping (SLAM), tend to rely on scene reconstruction from significant translational motion in order to compute camera positions. This can often lead to failure in application scenarios such as tracking for seated sport spectators, or stereo panorama capture where the translational movement is small compared to the scale of the environment. To begin with, we investigate the topic of localisation as it is key to providing global context for many stationary applications. To achieve this, we capture our own datasets in a variety of large open spaces including two sports stadia. We then develop and investigate these techniques in the context of these sports stadia using a variety of state-of-the-art localisation approaches. We cover geometry-based methods to handle dynamic aspects of a stadium environment, as well as appearance-based methods, and compare them to a state-of-the-art SfM system to identify the most applicable methods for server-based and on-device localisation. Recent work in SfM has shown that the type of stationary motion that we target can be reliably estimated by applying spherical constraints to the pose estimation. In this thesis, we extend these concepts into a real-time keyframe-based SLAM system for the purposes of AR, and develop a unique data structure for simplifying keyframe selection. We show that our constrained approach can track more robustly in these challenging stationary scenarios compared to state-of-the-art SLAM through both synthetic and real-data tests. In the application of capturing stereo panoramas for VR, this thesis demonstrates the unsuitability of standard SfM techniques for reconstructing these circular videos. We apply and extend recent research in spherically constrained SfM to creating stereo panoramas and compare this with state-of-the-art general SfM in a technical evaluation. With a user study, we show that the motion requirements of our SfM approach are similar to the natural motion of users, and that a constrained SfM approach is sufficient for providing stereoscopic effects when viewing the panoramas in VR