Buffer-Aided Model Predictive Controller to Mitigate Model Mismatches and Localization Errors

Any vehicle needs to be aware of its localization, destination, and neighboring vehicles\u27 state information for collision free navigation. A centralized controller computes controls for cooperative adaptive cruise control (CACC) vehicles based on the assumed behavior of manually driven vehicles (MDVs) in a mixed vehicle scenario. The assumed behavior of the MDVs may be different from the actual behavior, which gives rise to a model mismatch. The use of erroneous localization information can generate erroneous controls. The presence of a model mismatch and the use of erroneous controls could potentially result into collisions. A controller robust to issues such as localization errors and model mismatches is thus required. This paper proposes a robust model predictive controller, which accounts for localization errors and mitigates model mismatches. Future control values computed by the centralized controller are shared with CACC vehicles and are stored in a buffer. Due to large localization errors or model mismatches when control computations are infeasible, control values from the buffer are used. Simulation results show that the proposed robust controller with buffer can avoid almost the same number of collisions in a scenario impacted by localization errors as that in a scenario with no localization errors despite model mismatch

Evaluating Model Mismatch Impacting CACC Controllers in Mixed Traffic using a Driving Simulator

International audienceAt early market penetration, automated vehicles will share the road with legacy vehicles. For a safe transportation system, automated vehicle controllers therefore need to estimate the behavior of the legacy vehicles. However, mismatches between the estimated and real human behaviors can lead to inefficient control inputs, and even collisions in the worst case. In this paper, we propose a framework for evaluating the impact of model mismatch by interfacing a controller under test with a driving simulator. As a proof-of-concept, an algorithm based on Model Predictive Control (MPC) is evaluated in a braking scenario. We show how model mismatch between estimated and real human behavior can lead to a decrease in avoided collisions by almost 46%, and an increase in discomfort by almost 91%. Model mismatch is therefore non-negligible and the proposed framework is a unique method to evaluate them

A Survey on Remote Operation of Road Vehicles

In recent years, the use of remote operation has been proposed as a bridge towards driverless mobility by providing human assistance remotely when an automated driving system finds a situation that is ambiguous and requires input from a remote operator. The remote operation of road vehicles has also been proposed as a way to enable drivers to operate vehicles from safer and more comfortable locations. While commercial solutions for remote operation exist, remaining challenges are being tackled by the research community, who is continuously testing and validating the feasibility of deploying remote operation of road vehicles on public roads. These tests range from the technological scope to social aspects such as acceptability and usability that affect human performance. This survey presents a compilation of works that approach the remote operation of road vehicles. We start by describing the basic architecture of remote operation systems and classify their modes of operation depending on the level of human intervention. We use this classification to organize and present recent and relevant work on the field from industry and academia. Finally, we identify the challenges in the deployment of remote operation systems in the technological, regulatory, and commercial scopes

Multiple vehicle cooperation and collision avoidance in automated vehicles : Survey and an AI‑enabled conceptual framework

Prospective customers are becoming more concerned about safety and comfort as the automobile industry swings toward automated vehicles (AVs). A comprehensive evaluation of recent AVs collision data indicates that modern automated driving systems are prone to rear-end collisions, usually leading to multiple-vehicle collisions. Moreover, most investigations into severe traffic conditions are confined to single-vehicle collisions. This work reviewed diverse techniques of existing literature to provide planning procedures for multiple vehicle cooperation and collision avoidance (MVCCA) strategies in AVs while also considering their performance and social impact viewpoints. Firstly, we investigate and tabulate the existing MVCCA techniques associated with single-vehicle collision avoidance perspectives. Then, current achievements are extensively evaluated, challenges and flows are identified, and remedies are intelligently formed to exploit a taxonomy. This paper also aims to give readers an AI-enabled conceptual framework and a decision-making model with a concrete structure of the training network settings to bridge the gaps between current investigations. These findings are intended to shed insight into the benefits of the greater efficiency of AVs set-up for academics and policymakers. Lastly, the open research issues discussed in this survey will pave the way for the actual implementation of driverless automated traffic systems

Future Roles for Autonomous Vertical Lift in Disaster Relief and Emergency Response

System analysis concepts are applied to the assessment of potential collaborative contributions of autonomous system and vertical lift (a.k.a. rotorcraft, VTOL, powered-lift, etc.) technologies to the important, and perhaps underemphasized, application domain of disaster relief and emergency response. In particular, an analytic framework is outlined whereby system design functional requirements for an application domain can be derived from defined societal good goals and objectives

The Hierarchical Control Method for Coordinating a Group of Connected Vehicles on Urban Roads

Safety, mobility and environmental impact are the three major challenges in today\u27s transportation system. As the advances in wireless communication and vehicle automation technologies, they have rapidly led to the emergence and development of connected and automated vehicles (CAVs). We can expect fully CAVs by 2030. The CAV technologies offer another solution for the issues we are dealing with in the current transportation system. In the meanwhile, urban roads are one of the most important part in the transportation network. Urban roads are characterized by multiple interconnected intersections. They are more complicated than highway traffic, because the vehicles on the urban roads are moving in multiple directions with higher relative velocity. Most of the traffic accidents happened at intersections and the intersections are the major contribution to the traffic congestions. Our urban road infrastructures are also becoming more intelligent. Sensor-embedded roadways are continuously gathering traffic data from passing vehicles. Our smart vehicles are meeting intelligent roads. However, we have not taken the fully advantages of the data rich traffic environment provided by the connected vehicle technologies and intelligent road infrastructures. The objective of this research is to develop a coordination control strategy for a group of connected vehicles under intelligent traffic environment, which can guide the vehicles passing through the intersections and make smart lane change decisions with the objective of improving overall fuel economy and traffic mobility. The coordination control strategy should also be robust to imperfect connectivity conditions with various connected vehicle penetration rate. This dissertation proposes a hierarchical control method to coordinate a group of connected vehicles travelling on urban roads with intersections. The dissertation includes four parts of the application of our proposed method: First, we focus on the coordination of the connected vehicles on the multiple interconnected unsignalized intersection roads, where the traffic signals are removed and the collision avoidance at the intersection area relays on the communication and cooperation of the connected vehicles and intersection controllers. Second, a fuel efficient hierarchical control method is proposed to control the connected vehicles travel on the signalized intersection roads. With the signal phase and timing (SPAT) information, our proposed approach is able to help the connected vehicles minimize red light idling and improve the fuel economy at the same time. Third, the research is extended form single lane to multiple lane, where the connected vehicle discretionary and cooperative mandatory lane change have been explored. Finally, we have analysis the real-world implementation potential of our proposed algorithm including the communication delay and real-time implementation analysis

Design and Evaluation of a Traffic Safety System based on Vehicular Networks for the Next Generation of Intelligent Vehicles

La integración de las tecnologías de las telecomunicaciones en el sector del automóvil permitirá a los vehículos intercambiar información mediante Redes Vehiculares, ofreciendo numerosas posibilidades. Esta tesis se centra en la mejora de la seguridad vial y la reducción de la siniestralidad mediante Sistemas Inteligentes de Transporte (ITS). El primer paso consiste en obtener una difusión eficiente de los mensajes de advertencia sobre situaciones potencialmente peligrosas. Hemos desarrollado un marco para simular el intercambio de mensajes entre vehículos, utilizado para proponer esquemas eficientes de difusión. También demostramos que la disposición de las calles tiene gran influencia sobre la eficiencia del proceso. Nuestros algoritmos de difusión son parte de una arquitectura más amplia (e-NOTIFY) capaz de detectar accidentes de tráfico e informar a los servicios de emergencia. El desarrollo y evaluación de un prototipo demostró la viabilidad del sistema y cómo podría ayudar a reducir el número de víctimas en carretera