Netlist Decomposition and Candidate Generation for Analog IC Routing

Netlist decomposition and candidate generation is a non-conventional approach in the routing stage of the place and route (PnR) flow. While there has been significant research and advancement in the digital domain for automation with respect to this as well as other techniques, very little work has been done in the analog domain due to its complex constraints and specific requirements. With this proposed method, the most common requirements of Analog circuits are taken into consideration to provide candidate routes for netlists of analog Integrated Chips (IC). Netlist decomposition is an important stage of breaking down multi-pin nets into two-pin nets by adding additional nodes for each net. The proposed method takes into account blockages and constraints such as symmetry and bends to develop a new algorithm using Steiner trees and Hanan grids to generate optimal Steiner points. This method also breaks down multi-pin nets to 3-pin nets which reduces the wirelength and computations significantly. The decomposed net segments are run through Dijkstra algorithm to generate multiple candidates and an Integer Linear programming (ILP) solver is used to pick the best candidates that follow all the constraints and design rules. The experimental results show that overall wirelength is reduced by 5.16% while using 3-pin net decomposition when compared to 2-pin net decomposition. There is also a reduction in the number of metal layers used and the number of Steiner points generated. The method shows lesser computations when compared to other decomposition techniques as it avoids multiple reroutes to obtain Design Rule Check (DRC) clean routes

Netlist Decomposition and Candidate Generation for Analog IC Routing

Netlist decomposition and candidate generation is a non-conventional approach in the routing stage of the place and route (PnR) flow. While there has been significant research and advancement in the digital domain for automation with respect to this as well as other techniques, very little work has been done in the analog domain due to its complex constraints and specific requirements. With this proposed method, the most common requirements of Analog circuits are taken into consideration to provide candidate routes for netlists of analog Integrated Chips (IC). Netlist decomposition is an important stage of breaking down multi-pin nets into two-pin nets by adding additional nodes for each net. The proposed method takes into account blockages and constraints such as symmetry and bends to develop a new algorithm using Steiner trees and Hanan grids to generate optimal Steiner points. This method also breaks down multi-pin nets to 3-pin nets which reduces the wirelength and computations significantly. The decomposed net segments are run through Dijkstra algorithm to generate multiple candidates and an Integer Linear programming (ILP) solver is used to pick the best candidates that follow all the constraints and design rules. The experimental results show that overall wirelength is reduced by 5.16% while using 3-pin net decomposition when compared to 2-pin net decomposition. There is also a reduction in the number of metal layers used and the number of Steiner points generated. The method shows lesser computations when compared to other decomposition techniques as it avoids multiple reroutes to obtain Design Rule Check (DRC) clean routes

Using Remote Sensing and Biogeographic Modeling to Understand the Oak Savannas of the Sheyenne National Grassland, North Dakota, USA

Oak savannas are valuable and complex ecosystems that provide multiple ecosystem goods and services, including grazing for livestock, watershed regulation, and recreation. These ecosystems of the woodland-prairie ecoregion of the Midwestern United States are, however, in danger of disappearing. The Sheyenne National Grassland, North Dakota, a protected Prairie grassland-savanna, is a representative of such rare habitats, where oak savanna is found at the landscape scale. In this research, I map the distribution patterns of oak savanna in the Sheyenne using a combination of remote sensing and geospatial datasets, including landscape topography, soils, and fire disturbance. Further, I interpret the performance of a suite of advanced Species Distribution Modeling approaches including Maximum Entropy, Random Forest, Generalized Boosted Model, and Classification Tree to analyze the primary environmental and management factors influencing oak distributions at landscape scales. Woody canopy cover was estimated with high classification accuracy (80-95%) for two study areas of the Sheyenne National Grassland. Among the four species distribution modeling approaches tested, the Random Forest (RF) approach provided the best predictive model. RF model parameters indicate that oak trees favor gently sloping locations, on well-drained upland and sandy soils, with north-facing aspect. While no direct data on water relationships were possible in this research, the importance of the topographic and soil variables in the SDM presumably reflect oak preference for locations and soils that are not prone to water saturation, with milder summer temperatures (i.e. northern aspects), providing conditions suitable for seedling establishment and growth. This research increases our understanding of the biogeography of Midwestern tall-grass oak savannas and provides a decision-support tool for oak savanna management

Shortest Paths and Steiner Trees in VLSI Routing

Routing is one of the major steps in very-large-scale integration (VLSI) design. Its task is to find disjoint wire connections between sets of points on a chip, subject to numerous constraints. This problem is solved in a two-stage approach, which consists of so-called global and detailed routing steps. For each set of metal components to be connected, global routing reduces the search space by computing corridors in which detailed routing sequentially determines the desired connections as shortest paths. In this thesis, we present new theoretical results on Steiner trees and shortest paths, the two main mathematical concepts in routing. In the practical part, we give computational results of BonnRoute, a VLSI routing tool developed at the Research Institute for Discrete Mathematics at the University of Bonn. Interconnect signal delays are becoming increasingly important in modern chip designs. Therefore, the length of paths or direct delay measures should be taken into account when constructing rectilinear Steiner trees. We consider the problem of finding a rectilinear Steiner minimum tree (RSMT) that --- as a secondary objective --- minimizes a signal delay related objective. Given a source we derive some structural properties of RSMTs for which the weighted sum of path lengths from the source to the other terminals is minimized. Also, we present an exact algorithm for constructing RSMTs with weighted sum of path lengths as secondary objective, and a heuristic for various secondary objectives. Computational results for industrial designs are presented. We further consider the problem of finding a shortest rectilinear Steiner tree in the plane in the presence of rectilinear obstacles. The Steiner tree is allowed to run over obstacles; however, if it intersects an obstacle, then no connected component of the induced subtree must be longer than a given fixed length. This kind of length restriction is motivated by its application in VLSI routing where a large Steiner tree requires the insertion of repeaters which must not be placed on top of obstacles. We show that there are optimal length-restricted Steiner trees with a special structure. In particular, we prove that a certain graph (called augmented Hanan grid) always contains an optimal solution. Based on this structural result, we give an approximation scheme for the special case that all obstacles are of rectangular shape or are represented by at most a constant number of edges. Turning to the shortest paths problem, we present a new generic framework for Dijkstra's algorithm for finding shortest paths in digraphs with non-negative integral edge lengths. Instead of labeling individual vertices, we label subgraphs which partition the given graph. Much better running times can be achieved if the number of involved subgraphs is small compared to the order of the original graph and the shortest path problems restricted to these subgraphs is computationally easy. As an application we consider the VLSI routing problem, where we need to find millions of shortest paths in partial grid graphs with billions of vertices. Here, the algorithm can be applied twice, once in a coarse abstraction (where the labeled subgraphs are rectangles), and once in a detailed model (where the labeled subgraphs are intervals). Using the result of the first algorithm to speed up the second one via goal-oriented techniques leads to considerably reduced running time. We illustrate this with the routing program BonnRoute on leading-edge industrial chips. Finally, we present computational results of BonnRoute obtained on real-world VLSI chips. BonnRoute fulfills all requirements of modern VLSI routing and has been used by IBM and its customers over many years to produce more than one thousand different chips. To demonstrate the strength of BonnRoute as a state-of-the-art industrial routing tool, we show that it performs excellently on all traditional quality measures such as wire length and number of vias, but also on further criteria of equal importance in the every-day work of the designer

Hardness and Approximation of Octilinear Steiner Trees

Given a point set K of terminals in the plane, the octilinear Steiner tree problem is to find a shortest tree that interconnects all terminals and edges run either in horizontal, vertical, or 45° diagonal direction. This problem is fundamental for the novel octilinear routing paradigm in VLSI design, the so-called X-architecture. As the related rectilinear and the Euclidian Steiner tree problem are well-known to be NP-hard, the same was widely believed for the octilinear Steiner tree problem but left open for quite some time. In this paper, we prove the NP-completeness of the decision version of the octilinear Steiner tree problem. We also show how to reduce the octilinear Steiner tree problem to the Steiner tree problem in graphs of polynomial size with the following approximation guarantee. We construct a graph of size O(n^2/epsilon^2) which contains a (1+epsilon)-approximation of a minimum octilinear Steiner tree for every epsilon > 0 and n = |K|. Hence, we can apply any k-approximation algorithm for the Steiner tree problem in graphs (the currently best known bound is k=1.55) and achieve an (k+epsilon)-approximation bound for the octilinear Steiner tree problem. This approximation guarantee also holds for the more difficult case where the Steiner tree has to avoid blockages (obstacles bounded by octilinear polygons)

Netlist Decomposition and Candidate Generation for Analog IC Routing

Netlist decomposition and candidate generation is a non-conventional approach in the routing stage of the place and route (PnR) flow. While there has been significant research and advancement in the digital domain for automation with respect to this as well as other techniques, very little work has been done in the analog domain due to its complex constraints and specific requirements. With this proposed method, the most common requirements of Analog circuits are taken into consideration to provide candidate routes for netlists of analog Integrated Chips (IC). Netlist decomposition is an important stage of breaking down multi-pin nets into two-pin nets by adding additional nodes for each net. The proposed method takes into account blockages and constraints such as symmetry and bends to develop a new algorithm using Steiner trees and Hanan grids to generate optimal Steiner points. This method also breaks down multi-pin nets to 3-pin nets which reduces the wirelength and computations significantly. The decomposed net segments are run through Dijkstra algorithm to generate multiple candidates and an Integer Linear programming (ILP) solver is used to pick the best candidates that follow all the constraints and design rules. The experimental results show that overall wirelength is reduced by 5.16% while using 3-pin net decomposition when compared to 2-pin net decomposition. There is also a reduction in the number of metal layers used and the number of Steiner points generated. The method shows lesser computations when compared to other decomposition techniques as it avoids multiple reroutes to obtain Design Rule Check (DRC) clean routes

Netlist Decomposition and Candidate Generation for Analog IC Routing

Netlist decomposition and candidate generation is a non-conventional approach in the routing stage of the place and route (PnR) flow. While there has been significant research and advancement in the digital domain for automation with respect to this as well as other techniques, very little work has been done in the analog domain due to its complex constraints and specific requirements. With this proposed method, the most common requirements of Analog circuits are taken into consideration to provide candidate routes for netlists of analog Integrated Chips (IC). Netlist decomposition is an important stage of breaking down multi-pin nets into two-pin nets by adding additional nodes for each net. The proposed method takes into account blockages and constraints such as symmetry and bends to develop a new algorithm using Steiner trees and Hanan grids to generate optimal Steiner points. This method also breaks down multi-pin nets to 3-pin nets which reduces the wirelength and computations significantly. The decomposed net segments are run through Dijkstra algorithm to generate multiple candidates and an Integer Linear programming (ILP) solver is used to pick the best candidates that follow all the constraints and design rules. The experimental results show that overall wirelength is reduced by 5.16% while using 3-pin net decomposition when compared to 2-pin net decomposition. There is also a reduction in the number of metal layers used and the number of Steiner points generated. The method shows lesser computations when compared to other decomposition techniques as it avoids multiple reroutes to obtain Design Rule Check (DRC) clean routes