An Interpolative Analytical Cache Model with Application to Performance-Power Design Space Exploration

Caches are known to consume up to half of all system power in embedded processors. Co-optimizing performance and power of the cache subsystems is therefore an important step in the design of embedded systems, especially those employing application specific instruction processors. In this project, we propose an analytical cache model that succinctly captures the miss performance of an application over the entire cache parameter space. Unlike exhaustive trace driven simulation, our model requires that the program be simulated once so that a few key characteristics can be obtained. Using these application-dependent characteristics, the model can span the entire cache parameter space consisting of cache sizes, associativity and cache block sizes. In our unified model, we are able to cater for direct-mapped, set and fully associative instruction, data and unified caches. Validation against full trace-driven simulations shows that our model has a high degree of fidelity. Finally, we show how the model can be coupled with a power model for caches such that one can very quickly decide on pareto-optimal performance-power design points for rapid design space exploration.Singapore-MIT Alliance (SMA

HWP: Hardware Support to Reconcile Cache Energy, Complexity, Performance and WCET Estimates in Multicore Real-Time Systems

High-performance processors have deployed multilevel cache (MLC) systems for decades. In the embedded real-time market, the use of MLC is also on the rise, with processors for future systems in space, railway, avionics and automotive already featuring two or more cache levels. One of the most critical elements for MLC is the write policy that not only affects several key metrics such as performance, WCET estimates, energy/power, and reliability, but also the design of complexity-prone cache coherence protocol and cache reliability solutions. In this paper we make an extensive analysis of existing write policies, namely write-through (WT) and write-back (WB). In the context of the real-time domain, we show that no write policy is superior for all metrics: WT simplifies the design of the coherence and reliability solutions at the cost of performance, WCET, and energy; while WB improves performance and energy results, but complicates cache design. To take the best of each policy, we propose Hybrid Write Policy (HWP) a low-complexity hardware mechanism that reconciles the benefits of WT in terms of simplifying the cache design (e.g. coherence solution) and the benefits of WB in improved average performance and WCET estimates as the pressure on the interconnection network increases. Guaranteed performance results show that HWP scales with core count similar to WB. Likewise, HWP reduces cache energy usage of WT, to levels similar to those of WB. These benefits are obtained while retaining the reduced coherence complexity of WT, in contrast to high coherence costs under WB

Efficient Instruction and Data Caching for High Performance Embedded Processors

In the last years, embedded systems have evolved so that they offer capabilities we could only find before in high performance systems. Portable devices already have multiprocessors on-chip (such as PowerPC 476FP or ARM Cortex A9 MP), usually multi-threaded, and a powerful multi-level cache memory hierarchy on-chip. As most of these systems are battery-powered, the power consumption becomes a critical issue. Achieving high performance and low power consumption is a high complexity challenge where some proposals have been already made. Suarez et al. proposed a new cache hierarchy on-chip, the LP-NUCA (Low Power NUCA), which is able to reduce the access latency taking advantage of NUCA (Non-Uniform Cache Architectures) properties. The key points are decoupling the functionality, and utilizing three specialized networks on-chip. This structure has been proved to be efficient for data hierarchies, achieving a good performance and reducing the energy consumption. On the other hand, instruction caches have different requirements and characteristics than data caches, contradicting the low-power embedded systems requirements, especially in SMT (simultaneous multi-threading) environments. We want to study the benefits of utilizing small tiled caches for the instruction hierarchy, so we propose a new design, ID-LP-NUCAs. Thus, we need to re-evaluate completely our previous design in terms of structure design, interconnection networks (including topologies, flow control and routing), content management (with special interest in hardware/software content allocation policies), and structure sharing. In CMP environments (chip multiprocessors) with parallel workloads, coherence plays an important role, and must be taken into consideration

Performance and Energy Trade-offs Analysis of L2 on-Chip Cache Architectures for Embedded MPSoCs

On-chip memory organization is one of the most important aspects that can influence the overall system behavior in multi-processor systems. Following the trend set by high-performance processors, high-end embedded cores are moving from single-level on chip caches to a two-level on-chip cache hierarchy. Whereas in the embedded world there is general consensus on L1 private caches, for L2 there is still not a dominant architectural paradigm. Cache architectures that work for high performance computers turn out to be inefficient for embedded systems (mainly due to power-efficiency issues). This paper presents a virtual platform for design space exploration of L2 cache architectures in low-power Multi-Processor-Systems-on-Chip (MPSoCs). The tool contains several L2 caches templates, and new architectures can be easily added using our flexible plugin system. Given a set of constrains for a specific system (power, area, performance), our tool will perform extensive exploration to find the cache organization that best suits our needs. Through some practical experiments, we show how it is possible to select the optimal L2 cache, and how this kind of tool can help designers avoid some common misconceptions. Benchmarking results in the experiments section will show that for a case study with multiple processors running communicating tasks allocated on different cores, the private L2 cache organization still performs better than the shared one

Fast, predictable and low energy memory references through architecture-aware compilation

The design of future high-performance embedded systems is hampered by two problems: First, the required hardware needs more energy than is available from batteries. Second, current cache-based approaches for bridging the increasing speed gap between processors and memories cannot guarantee predictable real-time behavior. A contribution to solving both problems is made in this paper which describes a comprehensive set of algorithms that can be applied at design time in order to maximally exploit scratch pad memories (SPMs). We show that both the energy consumption as well as the computed worst case execution time (WCET) can be reduced by up to to 80% and 48%, respectively, by establishing a strong link between the memory architecture and the compiler

A Survey of Techniques For Improving Energy Efficiency in Embedded Computing Systems

Recent technological advances have greatly improved the performance and features of embedded systems. With the number of just mobile devices now reaching nearly equal to the population of earth, embedded systems have truly become ubiquitous. These trends, however, have also made the task of managing their power consumption extremely challenging. In recent years, several techniques have been proposed to address this issue. In this paper, we survey the techniques for managing power consumption of embedded systems. We discuss the need of power management and provide a classification of the techniques on several important parameters to highlight their similarities and differences. This paper is intended to help the researchers and application-developers in gaining insights into the working of power management techniques and designing even more efficient high-performance embedded systems of tomorrow