Dynamics of thermoelastic thin plates: A comparison of four theories

Four distinct theories describing the flexural motion of thermoelastic thin plates are compared. The theories are due to Chadwick, Lagnese and Lions, Simmonds, and Norris. Chadwick's theory requires a 3D spatial equation for the temperature but is considered the most accurate as the others are derivable from it by different approximations. Attention is given to the damping of flexural waves. Analytical and quantitative comparisons indicate that the Lagnese and Lions model with a 2D temperature equation captures the essential features of the thermoelastic damping, but contains systematic inaccuracies. These are attributable to the approximation for the first moment of the temperature used in deriving the Lagnese and Lions equation. Simmonds' model with an explicit formula for temperature in terms of plate deflection is the simplest of all but is accurate only at low frequency, where the damping is linearly proportional to the frequency. It is shown that the Norris model, which is almost as simple as Simmond's, is as accurate as the more precise but involved theory of Chadwick.Comment: 2 figures, 1 tabl

The dynamics of cracks in torn thin sheets

Motivated by recent experiments, we present a study of the dynamics of cracks in thin sheets. While the equations of elasticity for thin plates are well known, there remains the question of path selection for a propagating crack. We invoke a generalization of the principle of local symmetry to provide a criterion for path selection and demonstrate qualitative agreement with the experimental findings. The nature of the singularity at the crack tip is studied with and without the interference of nonlinear terms.Comment: 7 pages, 11 figure

Elastic theory of unconstrained non-Euclidean plates

Non-Euclidean plates are a subset of the class of elastic bodies having no stress-free configuration. Such bodies exhibit residual stress when relaxed from all external constraints, and may assume complicated equilibrium shapes even in the absence of external forces. In this work we present a mathematical framework for such bodies in terms of a covariant theory of linear elasticity, valid for large displacements. We propose the concept of non-Euclidean plates to approximate many naturally formed thin elastic structures. We derive a thin plate theory, which is a generalization of existing linear plate theories, valid for large displacements but small strains, and arbitrary intrinsic geometry. We study a particular example of a hemispherical plate. We show the occurrence of a spontaneous buckling transition from a stretching dominated configuration to bending dominated configurations, under variation of the plate thickness

On Stability of Hyperbolic Thermoelastic Reissner-Mindlin-Timoshenko Plates

In the present article, we consider a thermoelastic plate of Reissner-Mindlin-Timoshenko type with the hyperbolic heat conduction arising from Cattaneo's law. In the absense of any additional mechanical dissipations, the system is often not even strongly stable unless restricted to the rotationally symmetric case, etc. We present a well-posedness result for the linear problem under general mixed boundary conditions for the elastic and thermal parts. For the case of a clamped, thermally isolated plate, we show an exponential energy decay rate under a full damping for all elastic variables. Restricting the problem to the rotationally symmetric case, we further prove that a single frictional damping merely for the bending compoment is sufficient for exponential stability. To this end, we construct a Lyapunov functional incorporating the Bogovski\u{i} operator for irrotational vector fields which we discuss in the appendix.Comment: 27 page

SOUND SYNTHESIS OF GONGS OBTAINED FROM NONLINEAR THIN PLATES VIBRATIONS: COMPARISON BETWEEN A MODAL APPROACH AND A FINITE DIFFERENCE SCHEME

International audienceThe sound of a gong is simulated through the vibrations of thin elastic plates. The dynamical equations are necessarily nonlinear, crashing and shimmering being typical nonlinear effects. In this work two methods are used to simulate the nonlinear plates: a finite difference scheme and a modal approach. The striking force is approximated to the first order by a raised cosine of varying amplitude and contact duration acting on one point of the surface. It will be seen that for linear and moderately nonlinear vibrations the modal approach is particularly appealing as it allows the implementation of a rich damping mechanism by introducing a damping coefficient for each mode. In this way, the frequency-dependent decay rates can be tuned to get a very realistic sound. However, in many cases cymbal vibrations are found in strongly nonlinear regimes, where an energy cascade through lengthscales brings energy up to high-frequency modes. Hence, the number of modes retained in the truncation becomes a crucial parameter of the simulation. In this sense the finite difference scheme is usually better suited for reproducing crash and gong-like sounds, because this scheme retains all the modes up to (almost) Nyquist. However, the modal equations will be shown to have useful symmetry properties that can be used to speed up the off-line calculation process, leading to large memory and time savings and thus giving the possibility to simulate higher frequency ranges using modes

Controllability of a viscoelastic plate using one boundary control in displacement or bending

In this paper we consider a viscoelastic plate (linear viscoelasticity of the Maxwell-Boltzmann type) and we compare its controllability properties with the (known) controllability of a purely elastic plate (the control acts on the boundary displacement or bending). By combining operator and moment methods, we prove that the viscoelastic plate inherits the controllability properties of the purely elastic plate

A novel 2.5D spectral approach for studying thin-walled waveguides with fluid-acoustic interaction

This paper presents a novel formulation of two spectral elements to study guided waves in coupled problems involving thin-walled structures and fluid-acoustic enclosures. The aim of the proposed work is the development of a new efficient computational method to study problems where geometry and properties are invariant in one direction, commonly found in the analysis of guided waves. This assumption allows using a two-and-a-half dimensional (2.5D) spectral formulation in the wavenumber-frequency domain. The novelty of the proposed work is the formulation of spectral plate and fluid elements with an arbitrary order in 2.5D. A plate element based on a Reissner-Mindlin/Kirchhoff-Love mixed formulation is proposed to represent the thin-walled structure. This element uses approximation functions to overcome the difficulties to formulate elements with an arbitrary order from functions. The proposed element uses a substitute transverse shear strain field to avoid shear locking effects. Three benchmark problems are studied to check the convergence and the computational effort for different strategies. Accurate results are found with an appropriate combination of element size and order of the approximation functions allowing at least six nodes per wavelength. The effectiveness of the proposed elements is demonstrated studying the wave propagation in a water duct with a flexible side and an acoustic cavity coupled to a Helmholtz resonator.Ministerio de Economía y Competitividad BIA2013-43085-P y BIA2016-75042-C2-1-RCentro Informático Científico de Andalucía (CICA