Algorithms for Modular Self-reconfigurable Robots: Decision Making, Planning, and Learning

Modular self-reconfigurable robots (MSRs) are composed of multiple robotic modules which can change their connections with each other to take different shapes, commonly known as configurations. Forming different configurations helps the MSR to accomplish different types of tasks in different environments. In this dissertation, we study three different problems in MSRs: partitioning of modules, configuration formation planning and locomotion learning, and we propose algorithmic solutions to solve these problems. Partitioning of modules is a decision-making problem for MSRs where each module decides which partition or team of modules it should be in. To find the best set of partitions is a NP-complete problem. We propose game theory based both centralized and distributed solutions to solve this problem. Once the modules know which set of modules they should team-up with, they self-aggregate to form a specific shaped configuration, known as the configuration formation planning problem. Modules can be either singletons or connected in smaller configurations from which they need to form the target configuration. The configuration formation problem is difficult as multiple modules may select the same location in the target configuration to move to which might result in occlusion and consequently failure of the configuration formation process. On the other hand, if the modules are already in connected configurations in the beginning, then it would be beneficial to preserve those initial configurations for placing them into the target configuration as disconnections and re-connections are costly operations. We propose solutions based on an auction-like algorithm and (sub) graph-isomorphism technique to solve the configuration formation problem. Once the configuration is built, the MSR needs to move towards its goal location as a whole configuration for completing its task. If the configuration’s shape and size is not known a priori, then planning its locomotion is a difficult task as it needs to learn the locomotion pattern in dynamic time – the problem is known as adaptive locomotion learning. We have proposed reinforcement learning based fault-tolerant solutions for locomotion learning by MSRs

Design of an UAV swarm

This master thesis tries to give an overview on the general aspects involved in the design of an UAV swarm. UAV swarms are continuoulsy gaining popularity amongst researchers and UAV manufacturers, since they allow greater success rates in task accomplishing with reduced times. Appart from this, multiple UAVs cooperating between them opens a new field of missions that can only be carried in this way. All the topics explained within this master thesis will explain all the agents involved in the design of an UAV swarm, from the communication protocols between them, navigation and trajectory analysis and task allocation

Coordinating construction by a distributed multi-robot system

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2010.Cataloged from PDF version of thesis.Includes bibliographical references (p. 147-156).This thesis presents a decentralized algorithm for the coordinated assembly of 3D objects that consist of multiple types of parts, using a networked team of robots. We describe the algorithm and analyze its stability and adaptation properties. We partition construction in two tasks, tool delivery and assembly. Each task is performed by a networked team of specialized robots. We analyze the performance of the algorithms using the balls into bins problem, and show their adaptation to failure of robots, dynamic constraints, multiple types of elements and reconfiguration. We instantiate the algorithm to building truss-like objects using rods and connectors. The algorithm has been implemented in simulation and results for constructing 2D and 3D parts are shown. Finally, we describe hardware implementation of the algorithms where mobile manipulators assemble smarts parts with IR beacons.by Seung-kook Yun.Ph.D

FPGA design methodology for industrial control systems—a review

This paper reviews the state of the art of fieldprogrammable gate array (FPGA) design methodologies with a focus on industrial control system applications. This paper starts with an overview of FPGA technology development, followed by a presentation of design methodologies, development tools and relevant CAD environments, including the use of portable hardware description languages and system level programming/design tools. They enable a holistic functional approach with the major advantage of setting up a unique modeling and evaluation environment for complete industrial electronics systems. Three main design rules are then presented. These are algorithm refinement, modularity, and systematic search for the best compromise between the control performance and the architectural constraints. An overview of contributions and limits of FPGAs is also given, followed by a short survey of FPGA-based intelligent controllers for modern industrial systems. Finally, two complete and timely case studies are presented to illustrate the benefits of an FPGA implementation when using the proposed system modeling and design methodology. These consist of the direct torque control for induction motor drives and the control of a diesel-driven synchronous stand-alone generator with the help of fuzzy logic

A Decentralized Architecture for Active Sensor Networks

This thesis is concerned with the Distributed Information Gathering (DIG) problem in which a Sensor Network is tasked with building a common representation of environment. The problem is motivated by the advantages offered by distributed autonomous sensing systems and the challenges they present. The focus of this study is on Macro Sensor Networks, characterized by platform mobility, heterogeneous teams, and long mission duration. The system under consideration may consist of an arbitrary number of mobile autonomous robots, stationary sensor platforms, and human operators, all linked in a network. This work describes a comprehensive framework called Active Sensor Network (ASN) which addresses the tasks of information fusion, decistion making, system configuration, and user interaction. The main design objectives are scalability with the number of robotic platforms, maximum flexibility in implementation and deployment, and robustness to component and communication failure. The framework is described from three complementary points of view: architecture, algorithms, and implementation. The main contribution of this thesis is the development of the ASN architecture. Its design follows three guiding principles: decentralization, modularity, and locality of interactions. These principles are applied to all aspects of the architecture and the framework in general. To achieve flexibility, the design approach emphasizes interactions between components rather than the definition of the components themselves. The architecture specifies a small set of interfaces sufficient to implement a wide range of information gathering systems. In the area of algorithms, this thesis builds on the earlier work on Decentralized Data Fusion (DDF) and its extension to information-theoretic decistion making. It presents the Bayesian Decentralized Data Fusion (BDDF) algorithm formulated for environment features represented by a general probability density function. Several specific representations are also considered: Gaussian, discrete, and the Certainty Grid map. Well known algorithms for these representations are shown to implement various aspects of the Bayesian framework. As part of the ASN implementation, a practical indoor sensor network has been developed and tested. Two series of experiments were conducted, utilizing two types of environment representation: 1) point features with Gaussian position uncertainty and 2) Certainty Grid maps. The network was operational for several days at a time, with individual platforms coming on and off-line. On several occasions, the network consisted of 39 software components. The lessons learned during the system's development may be applicable to other heterogeneous distributed systems with data-intensive algorithms

Design, modelling, simulation and integration of cyber physical systems: Methods and applications

The main drivers for the development and evolution of Cyber Physical Systems (CPS) are the reduction of development costs and time along with the enhancement of the designed products. The aim of this survey paper is to provide an overview of different types of system and the associated transition process from mechatronics to CPS and cloud-based (IoT) systems. It will further consider the requirement that methodologies for CPS-design should be part of a multi-disciplinary development process within which designers should focus not only on the separate physical and computational components, but also on their integration and interaction. Challenges related to CPS-design are therefore considered in the paper from the perspectives of the physical processes, computation and integration respectively. Illustrative case studies are selected from different system levels starting with the description of the overlaying concept of Cyber Physical Production Systems (CPPSs). The analysis and evaluation of the specific properties of a sub-system using a condition monitoring system, important for the maintenance purposes, is then given for a wind turbine

Computational Frameworks for Multi-Robot Cooperative 3D Printing and Planning

This dissertation proposes a novel cooperative 3D printing (C3DP) approach for multi-robot additive manufacturing (AM) and presents scheduling and planning strategies that enable multi-robot cooperation in the manufacturing environment. C3DP is the first step towards achieving the overarching goal of swarm manufacturing (SM). SM is a paradigm for distributed manufacturing that envisions networks of micro-factories, each of which employs thousands of mobile robots that can manufacture different products on demand. SM breaks down the complicated supply chain used to deliver a product from a large production facility from one part of the world to another. Instead, it establishes a network of geographically distributed micro-factories that can manufacture the product at a smaller scale without increasing the cost. In C3DP, many printhead-carrying mobile robots work together to print a single part cooperatively. While it holds the promise to mitigate issues associated with gantry-based 3D printers, such as lack of scalability in print size and print speed, its realization is challenging because existing studies in the relevant literature do not address the fundamental issues in C3DP that stem from the amalgamation of the mobile nature of the robots, and continuous nature of the manufacturing tasks. To address this challenge, this dissertation asks two fundamental research questions: RQ1) How can the traditional 3D printing process be transformed to enable multi-robot cooperative AM? RQ2) How can cooperative manufacturing planning be realized in the presence of inherent uncertainties in AM and constraints that are dynamic in both space and time? To answer RQ1, we discretize the process of 3D printing into multiple stages. These stages include chunking (dividing a part into smaller chunks), scheduling (assigning chunks to robots and generating print sequences), and path and motion planning. To test the viability of the approach, we conducted a study on the tensile strength of chunk-based parts to examine their mechanical integrity. The study demonstrates that the chunk-based part can be as strong as the conventionally 3D-printed part. Next, we present different computational frameworks to address scheduling issues in C3DP. These include the development of 1) the world-first working strategy for C3DP, 2) a framework for automatic print schedule generation, evaluation, and validation, and 3) a resource-constrained scheduling approach for C3DP that uses a meta-heuristic approach such as a modified Genetic Algorithm (MGA) and a new algorithm that uses a constraint-satisficing approach to obtain collision-free print schedules for C3DP. To answer RQ2, a multi-robot decentralized approach based on a simple set of rules is used to plan for C3DP. The approach is resilient to uncertainties such as variation in printing times and can even outperform the centralized approach that uses MGA with a conflict-based search for large-scale problems. By answering these two fundamental questions, the central objective of the research project to establish computational frameworks to enable multi-robot cooperative manufacturing was achieved. The search for answers to the RQs led to the development of novel concepts that can be used not only in C3DP, but many other manufacturing tasks, in general, requiring cooperation among multiple robots

Advanced manned space flight simulation and training: An investigation of simulation host computer system concepts

The findings of a preliminary investigation by Southwest Research Institute (SwRI) in simulation host computer concepts is presented. It is designed to aid NASA in evaluating simulation technologies for use in spaceflight training. The focus of the investigation is on the next generation of space simulation systems that will be utilized in training personnel for Space Station Freedom operations. SwRI concludes that NASA should pursue a distributed simulation host computer system architecture for the Space Station Training Facility (SSTF) rather than a centralized mainframe based arrangement. A distributed system offers many advantages and is seen by SwRI as the only architecture that will allow NASA to achieve established functional goals and operational objectives over the life of the Space Station Freedom program. Several distributed, parallel computing systems are available today that offer real-time capabilities for time critical, man-in-the-loop simulation. These systems are flexible in terms of connectivity and configurability, and are easily scaled to meet increasing demands for more computing power