Discrete Wavelet Transforms

The discrete wavelet transform (DWT) algorithms have a firm position in processing of signals in several areas of research and industry. As DWT provides both octave-scale frequency and spatial timing of the analyzed signal, it is constantly used to solve and treat more and more advanced problems. The present book: Discrete Wavelet Transforms: Algorithms and Applications reviews the recent progress in discrete wavelet transform algorithms and applications. The book covers a wide range of methods (e.g. lifting, shift invariance, multi-scale analysis) for constructing DWTs. The book chapters are organized into four major parts. Part I describes the progress in hardware implementations of the DWT algorithms. Applications include multitone modulation for ADSL and equalization techniques, a scalable architecture for FPGA-implementation, lifting based algorithm for VLSI implementation, comparison between DWT and FFT based OFDM and modified SPIHT codec. Part II addresses image processing algorithms such as multiresolution approach for edge detection, low bit rate image compression, low complexity implementation of CQF wavelets and compression of multi-component images. Part III focuses watermaking DWT algorithms. Finally, Part IV describes shift invariant DWTs, DC lossless property, DWT based analysis and estimation of colored noise and an application of the wavelet Galerkin method. The chapters of the present book consist of both tutorial and highly advanced material. Therefore, the book is intended to be a reference text for graduate students and researchers to obtain state-of-the-art knowledge on specific applications

The 1992 4th NASA SERC Symposium on VLSI Design

Papers from the fourth annual NASA Symposium on VLSI Design, co-sponsored by the IEEE, are presented. Each year this symposium is organized by the NASA Space Engineering Research Center (SERC) at the University of Idaho and is held in conjunction with a quarterly meeting of the NASA Data System Technology Working Group (DSTWG). One task of the DSTWG is to develop new electronic technologies that will meet next generation electronic data system needs. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The NASA SERC is proud to offer, at its fourth symposium on VLSI design, presentations by an outstanding set of individuals from national laboratories, the electronics industry, and universities. These speakers share insights into next generation advances that will serve as a basis for future VLSI design

Efficient implementation of video processing algorithms on FPGA

The work contained in this portfolio thesis was carried out as part of an Engineering Doctorate (Eng.D) programme from the Institute for System Level Integration. The work was sponsored by Thales Optronics, and focuses on issues surrounding the implementation of video processing algorithms on field programmable gate arrays (FPGA). A description is given of FPGA technology and the currently dominant methods of designing and verifying firmware. The problems of translating a description of behaviour into one of structure are discussed, and some of the latest methodologies for tackling this problem are introduced. A number of algorithms are then looked at, including methods of contrast enhancement, deconvolution, and image fusion. Algorithms are characterised according to the nature of their execution flow, and this is used as justification for some of the design choices that are made. An efficient method of performing large two-dimensional convolutions is also described. The portfolio also contains a discussion of an FPGA implementation of a PID control algorithm, an overview of FPGA dynamic reconfigurability, and the development of a demonstration platform for rapid deployment of video processing algorithms in FPGA hardware

A novel parallel algorithm for surface editing and its FPGA implementation

A thesis submitted to the University of Bedfordshire in partial fulfilment of the requirements for the degree of Doctor of PhilosophySurface modelling and editing is one of important subjects in computer graphics. Decades of research in computer graphics has been carried out on both low-level, hardware-related algorithms and high-level, abstract software. Success of computer graphics has been seen in many application areas, such as multimedia, visualisation, virtual reality and the Internet. However, the hardware realisation of OpenGL architecture based on FPGA (field programmable gate array) is beyond the scope of most of computer graphics researches. It is an uncultivated research area where the OpenGL pipeline, from hardware through the whole embedded system (ES) up to applications, is implemented in an FPGA chip. This research proposes a hybrid approach to investigating both software and hardware methods. It aims at bridging the gap between methods of software and hardware, and enhancing the overall performance for computer graphics. It consists of four parts, the construction of an FPGA-based ES, Mesa-OpenGL implementation for FPGA-based ESs, parallel processing, and a novel algorithm for surface modelling and editing. The FPGA-based ES is built up. In addition to the Nios II soft processor and DDR SDRAM memory, it consists of the LCD display device, frame buffers, video pipeline, and algorithm-specified module to support the graphics processing. Since there is no implementation of OpenGL ES available for FPGA-based ESs, a specific OpenGL implementation based on Mesa is carried out. Because of the limited FPGA resources, the implementation adopts the fixed-point arithmetic, which can offer faster computing and lower storage than the floating point arithmetic, and the accuracy satisfying the needs of 3D rendering. Moreover, the implementation includes Bézier-spline curve and surface algorithms to support surface modelling and editing. The pipelined parallelism and co-processors are used to accelerate graphics processing in this research. These two parallelism methods extend the traditional computation parallelism in fine-grained parallel tasks in the FPGA-base ESs. The novel algorithm for surface modelling and editing, called Progressive and Mixing Algorithm (PAMA), is proposed and implemented on FPGA-based ES’s. Compared with two main surface editing methods, subdivision and deformation, the PAMA can eliminate the large storage requirement and computing cost of intermediated processes. With four independent shape parameters, the PAMA can be used to model and edit freely the shape of an open or closed surface that keeps globally the zero-order geometric continuity. The PAMA can be applied independently not only FPGA-based ESs but also other platforms. With the parallel processing, small size, and low costs of computing, storage and power, the FPGA-based ES provides an effective hybrid solution to surface modelling and editing

Dependable Embedded Systems

This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems

The role of cyclic strain on miRNA mediated human aortic smooth muscle cell (HAoSMC) dynamics

Vascular smooth muscle cells (VSMCs) are major contributors to regulation of vascular tone through their contractile flexibility. Along with other stimulus, they are exposed to mechanical cyclic strain. It is thought such stimulus can be a major regulator of phenotypic modulation in smooth muscle cells. Differentiated SMCs are characteristically quiescent and adapt elongated spindle morphology. In this state the cell expresses an extensive range of contractile proteins such as SM α-actin, Smoothelin and Calponin. SMCs in the synthetic end of the phenotype spectrum adapt a rhomboid morphology and display increased growth rate and higher migratory activity. Expression of the contractile proteins are significantly decreased and replaced with organelles involved in protein synthesis. Studies have shown that several non coding micro RNA (miRNA), which negatively regulate gene expression, are differentially expressed in altered SMC phenotypes. However, work into the effect of mechanical stimulus such as shear stress or cyclic strain on miRNA expression is scarce with only a handful so far identified. This study hypothesizes that “cyclic mechanical strain modulates vascular smooth muscle phenotype and ultimately function, mediated by miRNA regulation” This hypothesis was tested by exposing primary derived human aortic smooth muscle cells (HAoSMCs) to cyclic strain in an in vitro model. Results show cyclic strain at 5% and 10% levels of amplitude increases the abundance of contractile phenotype markers. A temporal study of the miRNA profile of SMCs exposed to 10% strain revealed a significant change in expression was evident after 24 hours of strain. Novel chemotaxis experiments demonstrated cyclic strain reduced cell migration, the effect of which was most evident at 24 hours where migration of the cells was less than half that of the static culture. To implicate miRNA as key coordinators in the reduced cell migration observed after cyclic strain, siRNA were targeted against an essential miRNA biogenesis molecule, Argonaute2 (Ago2). Cells transfected with siRNA for Ago2 negated the physiological stimulus of strain and had a marked increase in migration even over the static control. These investigastions highlight the physiological importance of cyclic strain on SMC phenotype and function how the cellular response to this stimulus is orchestrated via miRNA