Self-concatenated coding for wireless communication systems

In this thesis, we have explored self-concatenated coding schemes that are designed for transmission over Additive White Gaussian Noise (AWGN) and uncorrelated Rayleigh fading channels. We designed both the symbol-based Self-ConcatenatedCodes considered using Trellis Coded Modulation (SECTCM) and bit-based Self- Concatenated Convolutional Codes (SECCC) using a Recursive Systematic Convolutional (RSC) encoder as constituent codes, respectively. The design of these codes was carried out with the aid of Extrinsic Information Transfer (EXIT) charts. The EXIT chart based design has been found an efficient tool in finding the decoding convergence threshold of the constituent codes. Additionally, in order to recover the information loss imposed by employing binary rather than non-binary schemes, a soft decision demapper was introduced in order to exchange extrinsic information withthe SECCC decoder. To analyse this information exchange 3D-EXIT chart analysis was invoked for visualizing the extrinsic information exchange between the proposed Iteratively Decoding aided SECCC and soft-decision demapper (SECCC-ID). Some of the proposed SECTCM, SECCC and SECCC-ID schemes perform within about 1 dB from the AWGN and Rayleigh fading channels’ capacity. A union bound analysis of SECCC codes was carried out to find the corresponding Bit Error Ratio (BER) floors. The union bound of SECCCs was derived for communications over both AWGN and uncorrelated Rayleigh fading channels, based on a novel interleaver concept.Application of SECCCs in both UltraWideBand (UWB) and state-of-the-art video-telephone schemes demonstrated its practical benefits.In order to further exploit the benefits of the low complexity design offered by SECCCs we explored their application in a distributed coding scheme designed for cooperative communications, where iterative detection is employed by exchanging extrinsic information between the decoders of SECCC and RSC at the destination. In the first transmission period of cooperation, the relay receives the potentially erroneous data and attempts to recover the information. The recovered information is then re-encoded at the relay using an RSC encoder. In the second transmission period this information is then retransmitted to the destination. The resultant symbols transmitted from the source and relay nodes can be viewed as the coded symbols of a three-component parallel-concatenated encoder. At the destination a Distributed Binary Self-Concatenated Coding scheme using Iterative Decoding (DSECCC-ID) was employed, where the two decoders (SECCC and RSC) exchange their extrinsic information. It was shown that the DSECCC-ID is a low-complexity scheme, yet capable of approaching the Discrete-input Continuous-output Memoryless Channels’s (DCMC) capacity.Finally, we considered coding schemes designed for two nodes communicating with each other with the aid of a relay node, where the relay receives information from the two nodes in the first transmission period. At the relay node we combine a powerful Superposition Coding (SPC) scheme with SECCC. It is assumed that decoding errors may be encountered at the relay node. The relay node then broadcasts this information in the second transmission period after re-encoding it, again, using a SECCC encoder. At the destination, the amalgamated block of Successive Interference Cancellation (SIC) scheme combined with SECCC then detects and decodes the signal either with or without the aid of a priori information. Our simulation results demonstrate that the proposed scheme is capable of reliably operating at a low BER for transmission over both AWGN and uncorrelated Rayleigh fading channels. We compare the proposed scheme’s performance to a direct transmission link between the two sources having the same throughput

Capacity Approaching Coding Strategies for Machine-to-Machine Communication in IoT Networks

Radio access technologies for mobile communications are characterized by multiple access (MA) strategies. Orthogonal MA techniques were a reasonable choice for achieving good performance with single user detection. With the tremendous growth in the number of mobile users and the new internet of things (IoT) shifting paradigm, it is expected that the monthly mobile data traffic worldwide will exceed 24.3 exabytes by 2019, over 100 billion IoT connections by 2025, and the financial impact of IoT on the global economy varies in the range of 3.9 to 11.1 trillion dollars by 2025. In light of the envisaged exponential growth and new trends, one promising solution to further enhance data rates without increasing the bandwidth is by increasing the spectral efficiency of the channel. Non-orthogonal MA techniques are potential candidates for future wireless communications. The two corner points on the boundary region of the MA channel are known to be achievable by single user decoding followed by successive decoding (SD). Other points can also be achieved using time sharing or rate splitting. On the other hand, machine-to-machine (M2M) communication which is an enabling technology for the IoT, enables massive multipurpose networked devices to exchange information among themselves with minor or no human intervention. This thesis consists of three main parts. In the first part, we propose new practical encoding and joint belief propagation (BP) decoding techniques for 2-user MA erasure channel (MAEC) that achieve any rate pair close to the boundary of the capacity region without using time sharing nor rate splitting. While at the encoders, the corresponding parity check matrices are randomly built from a half-rate LDPC matrix, the joint BP decoder employs the associated Tanner graphs of the parity check matrices to iteratively recover the erasures in the received combined codewords. Specifically, the joint decoder performs two steps in each decoding iteration: 1) simultaneously and independently runs the BP decoding process at each constituent sub-graph to recover some of the common erasures, 2) update the other sub-graph with newly recovered erasures and vice versa. When the number of erasures in the received combined codewords is less than or equal to the number of parity check constraints, the decoder may successfully decode both codewords, otherwise the decoder declares decoding failure. Furthermore, we calculate the probability of decoding failure and the outage capacity. Additionally, we show how the erasure probability evolves with the number of decoding iterations and the maximum tolerable loss. Simulations show that any rate pair close to the capacity boundary is achievable without using time sharing. In the second part, we propose a new cooperative joint network and rateless coding strategy for machine-type communication (MTC) devices in the multicast settings where three or more MTC devices dynamically form a cluster to disseminate messages between themselves. Specifically, in the basic cluster, three MTC devices transmit their respective messages simultaneously to the relay in the first phase. The relay broadcasts back the combined messages to all MTC devices within the basic cluster in the second phase. Given the fact that each MTC device can remove its own message, the received signal in the second phase is reduced to the combined messages coming from the other two MTC devices. Hence, this results in exploiting the interference caused by one message on the other and therefore improving the bandwidth efficiency. Furthermore, each group of three MTC devices in vicinity can form a basic cluster for exchanging messages, and the basic scheme extends to N MTC devices. Furthermore, we propose an efficient algorithm to disseminate messages among a large number of MTC devices. Moreover, we implement the proposed scheme employing practical Raptor codes with the use of two relaying schemes, namely amplify and forward (AF) and de-noise and forward (DNF). We show that with very little processing at the relay using DNF relaying scheme, performance can be further enhanced. We also show that the proposed scheme achieves a near optimal sum rate performance. In the third part, we present a comparative study of joint channel estimation and decoding of factor graph-based codes over flat fading channels and propose a simple channel approximation scheme that performs close to the optimal technique. Specifically, when channel state information (CSI) is not available at the receiver, a simpler approach is to estimate the channel state of a group of received symbols, then use the approximated value of the channel with the received signal to compute the log likelihood ratio. Simulation results show that the proposed scheme exhibits about 0.4 dB loss compared to the optimal solution when perfect CSI is available at the receiver