3,652 research outputs found
Optimization of imu indoor localization with wireless sensors
© 2018 IEEE. This paper presents the development process of a wireless inertial measurement unit (IMU). A wireless communication configuration is designed for this unit. Low cost micro-electro-mechanical-systems (MEMS) accelerometers are used in the hardware prototyping
Cooperative Relative Positioning of Mobile Users by Fusing IMU Inertial and UWB Ranging Information
Relative positioning between multiple mobile users is essential for many
applications, such as search and rescue in disaster areas or human social
interaction. Inertial-measurement unit (IMU) is promising to determine the
change of position over short periods of time, but it is very sensitive to
error accumulation over long term run. By equipping the mobile users with
ranging unit, e.g. ultra-wideband (UWB), it is possible to achieve accurate
relative positioning by trilateration-based approaches. As compared to vision
or laser-based sensors, the UWB does not need to be with in line-of-sight and
provides accurate distance estimation. However, UWB does not provide any
bearing information and the communication range is limited, thus UWB alone
cannot determine the user location without any ambiguity. In this paper, we
propose an approach to combine IMU inertial and UWB ranging measurement for
relative positioning between multiple mobile users without the knowledge of the
infrastructure. We incorporate the UWB and the IMU measurement into a
probabilistic-based framework, which allows to cooperatively position a group
of mobile users and recover from positioning failures. We have conducted
extensive experiments to demonstrate the benefits of incorporating IMU inertial
and UWB ranging measurements.Comment: accepted by ICRA 201
Inertial Sensor Estimation of Initial and Terminal Contact during In-Field Running.
Given the popularity of running-based sports and the rapid development of Micro-electromechanical systems (MEMS), portable wireless sensors can provide in-field monitoring and analysis of running gait parameters during exercise. This paper proposed an intelligent analysis system from wireless micro-Inertial Measurement Unit (IMU) data to estimate contact time (CT) and flight time (FT) during running based on gyroscope and accelerometer sensors in a single location (ankle). Furthermore, a pre-processing system that detected the running period was introduced to analyse and enhance CT and FT detection accuracy and reduce noise. Results showed pre-processing successfully detected the designated running periods to remove noise of non-running periods. Furthermore, accelerometer and gyroscope algorithms showed good consistency within 95% confidence interval, and average absolute error of 31.53 ms and 24.77 ms, respectively. In turn, the combined system obtained a consistency of 84-100% agreement within tolerance values of 50 ms and 30 ms, respectively. Interestingly, both accuracy and consistency showed a decreasing trend as speed increased (36% at high-speed fore-foot strike). Successful CT and FT detection and output validation with consistency checking algorithms make in-field measurement of running gait possible using ankle-worn IMU sensors. Accordingly, accurate IMU-based gait analysis from gyroscope and accelerometer information can inform future research on in-field gait analysis
- …