Distributed video coding for wireless video sensor networks: a review of the state-of-the-art architectures

Distributed video coding (DVC) is a relatively new video coding architecture originated from two fundamental theorems namely, Slepian–Wolf and Wyner–Ziv. Recent research developments have made DVC attractive for applications in the emerging domain of wireless video sensor networks (WVSNs). This paper reviews the state-of-the-art DVC architectures with a focus on understanding their opportunities and gaps in addressing the operational requirements and application needs of WVSNs

DCT Video Compositing with Embedded Zerotree Coding for Multi-Point Video Conferencing

In this thesis, DCT domain video compositing with embedded zerotree coding for multi-point video conferencing is considered. In a typical video compositing system, video sequences coming from different sources are composited into one video stream and sent using a single channel to the receiver points. There are mainly three stages of video compositing: decoding of incoming video streams, decimation of video frames, andencoding of the composited video. Conventional spatial domain video compositing requires transformations between the DCT and the spatial domains increasing the complexity of computations. The advantage of the DCT domain video compositing is that the decoding, decimation and encoding remain fully in the DCT domain resulting in faster processing time and better quality of the composited videos. The composited videos are encoded via a DCT based embedded zerotree coder which was originally developed for wavelet coding. An adaptive arithmetic coder is used to encode the symbols obtained from the DCT based zerotree codingresulting in embedded bit stream. By using the embedded zerotree coder the quality of the composited videos is improved when compared to a conventional encoder. An advanced versionof zerotree coder is also used to increase the performance of the compositing system. Another improvement is due to the use of local cosine transform to decrease the blocking effect at low bit rates. We also apply the proposed DCT decimation/interpolation for single stream video coding achieving better quality than regular encoding process at low bit rates. The bit rate control problem is easily solved by taking the advantage the embedded property of zerotree coding since the coding control parameter is the bit rate itself. We also achieve the optimum bit rate allocation among the composited frames in a GOP without using subframe layer bit rate allocation, since zerotree coding uses successive approximation quantization allowing DCT coefficients to be encoded in descending significance order

Region-based object tracking for multipoint video conferencing using wavelet transform

2000-2001 > Academic research: refereed > Refereed conference paperVersion of RecordPublishe

The JPEG2000 still image coding system: An overview

With the increasing use of multimedia technologies, image compression requires higher performance as well as new features. To address this need in the specific area of still image encoding, a new standard is currently being developed, the JPEG2000. It is not only intended to provide rate-distortion and subjective image quality performance superior to existing standards, but also to provide features and functionalities that current standards can either not address efficiently or in many cases cannot address at all. Lossless and lossy compression, embedded lossy to lossless coding, progressive transmission by pixel accuracy and by resolution, robustness to the presence of bit-errors and region-of-interest coding, are some representative features. It is interesting to note that JPEG2000 is being designed to address the requirements of a diversity of applications, e.g. Internet, color facsimile, printing, scanning, digital photography, remote sensing, mobile applications, medical imagery, digital library and E-commerce

Adaptive video delivery using semantics

The diffusion of network appliances such as cellular phones, personal digital assistants and hand-held computers has created the need to personalize the way media content is delivered to the end user. Moreover, recent devices, such as digital radio receivers with graphics displays, and new applications, such as intelligent visual surveillance, require novel forms of video analysis for content adaptation and summarization. To cope with these challenges, we propose an automatic method for the extraction of semantics from video, and we present a framework that exploits these semantics in order to provide adaptive video delivery. First, an algorithm that relies on motion information to extract multiple semantic video objects is proposed. The algorithm operates in two stages. In the first stage, a statistical change detector produces the segmentation of moving objects from the background. This process is robust with regard to camera noise and does not need manual tuning along a sequence or for different sequences. In the second stage, feedbacks between an object partition and a region partition are used to track individual objects along the frames. These interactions allow us to cope with multiple, deformable objects, occlusions, splitting, appearance and disappearance of objects, and complex motion. Subsequently, semantics are used to prioritize visual data in order to improve the performance of adaptive video delivery. The idea behind this approach is to organize the content so that a particular network or device does not inhibit the main content message. Specifically, we propose two new video adaptation strategies. The first strategy combines semantic analysis with a traditional frame-based video encoder. Background simplifications resulting from this approach do not penalize overall quality at low bitrates. The second strategy uses metadata to efficiently encode the main content message. The metadata-based representation of object's shape and motion suffices to convey the meaning and action of a scene when the objects are familiar. The impact of different video adaptation strategies is then quantified with subjective experiments. We ask a panel of human observers to rate the quality of adapted video sequences on a normalized scale. From these results, we further derive an objective quality metric, the semantic peak signal-to-noise ratio (SPSNR), that accounts for different image areas and for their relevance to the observer in order to reflect the focus of attention of the human visual system. At last, we determine the adaptation strategy that provides maximum value for the end user by maximizing the SPSNR for given client resources at the time of delivery. By combining semantic video analysis and adaptive delivery, the solution presented in this dissertation permits the distribution of video in complex media environments and supports a large variety of content-based applications

Receiver-Driven Video Adaptation

In the span of a single generation, video technology has made an incredible impact on daily life. Modern use cases for video are wildly diverse, including teleconferencing, live streaming, virtual reality, home entertainment, social networking, surveillance, body cameras, cloud gaming, and autonomous driving. As these applications continue to grow more sophisticated and heterogeneous, a single representation of video data can no longer satisfy all receivers. Instead, the initial encoding must be adapted to each receiver's unique needs. Existing adaptation strategies are fundamentally flawed, however, because they discard the video's initial representation and force the content to be re-encoded from scratch. This process is computationally expensive, does not scale well with the number of videos produced, and throws away important information embedded in the initial encoding. Therefore, a compelling need exists for the development of new strategies that can adapt video content without fully re-encoding it. To better support the unique needs of smart receivers, diverse displays, and advanced applications, general-use video systems should produce and offer receivers a more flexible compressed representation that supports top-down adaptation strategies from an original, compressed-domain ground truth. This dissertation proposes an alternate model for video adaptation that addresses these challenges. The key idea is to treat the initial compressed representation of a video as the ground truth, and allow receivers to drive adaptation by dynamically selecting which subsets of the captured data to receive. In support of this model, three strategies for top-down, receiver-driven adaptation are proposed. First, a novel, content-agnostic entropy coding technique is implemented in which symbols are selectively dropped from an input abstract symbol stream based on their estimated probability distributions to hit a target bit rate. Receivers are able to guide the symbol dropping process by supplying the encoder with an appropriate rate controller algorithm that fits their application needs and available bandwidths. Next, a domain-specific adaptation strategy is implemented for H.265/HEVC coded video in which the prediction data from the original source is reused directly in the adapted stream, but the residual data is recomputed as directed by the receiver. By tracking the changes made to the residual, the encoder can compensate for decoder drift to achieve near-optimal rate-distortion performance. Finally, a fully receiver-driven strategy is proposed in which the syntax elements of a pre-coded video are cataloged and exposed directly to clients through an HTTP API. Instead of requesting the entire stream at once, clients identify the exact syntax elements they wish to receive using a carefully designed query language. Although an implementation of this concept is not provided, an initial analysis shows that such a system could save bandwidth and computation when used by certain targeted applications.Doctor of Philosoph

Adaptive intra refresh for robust wireless multi-view video

This thesis was submitted for the award of PhD and was awarded by Brunel University LondonMobile wireless communication technology is a fast developing field and every day new mobile communication techniques and means are becoming available. In this thesis multi-view video (MVV) is also refers to as 3D video. Thus, the 3D video signals through wireless communication are shaping telecommunication industry and academia. However, wireless channels are prone to high level of bit and burst errors that largely deteriorate the quality of service (QoS). Noise along the wireless transmission path can introduce distortion or make a compressed bitstream lose vital information. The error caused by noise progressively spread to subsequent frames and among multiple views due to prediction. This error may compel the receiver to pause momentarily and wait for the subsequent INTRA picture to continue decoding. The pausing of video stream affects the user's Quality of Experience (QoE). Thus, an error resilience strategy is needed to protect the compressed bitstream against transmission errors. This thesis focuses on error resilience Adaptive Intra Refresh (AIR) technique. The AIR method is developed to make the compressed 3D video more robust to channel errors. The process involves periodic injection of Intra-coded macroblocks in a cyclic pattern using H.264/AVC standard. The algorithm takes into account individual features in each macroblock and the feedback information sent by the decoder about the channel condition in order to generate an MVV-AIR map. MVV-AIR map generation regulates the order of packets arrival and identifies the motion activities in each macroblock. Based on the level of motion activity contained in each macroblock, the MVV-AIR map classifies frames as high or low motion macroblocks. A proxy MVV-AIR transcoder is used to validate the efficiency of the generated MVV-AIR map. The MVV-AIR transcoding algorithm uses spatial and views downscaling scheme to convert from MVV to single view. Various experimental results indicate that the proposed error resilient MVV-AIR transcoder technique effectively improves the quality of reconstructed 3D video in wireless networks. A comparison of MVV-AIR transcoder algorithm with some traditional error resilience techniques demonstrates that MVV-AIR algorithm performs better in an error prone channel. Results of simulation revealed significant improvements in both objective and subjective qualities. No additional computational complexity emanates from the scheme while the QoS and QoE requirements are still fully met.Tertiary Institution Trust Fund (TETFund) of Nigeri

Robust and efficient video/image transmission

The Internet has become a primary medium for information transmission. The unreliability of channel conditions, limited channel bandwidth and explosive growth of information transmission requests, however, hinder its further development. Hence, research on robust and efficient delivery of video/image content is demanding nowadays. Three aspects of this task, error burst correction, efficient rate allocation and random error protection are investigated in this dissertation. A novel technique, called successive packing, is proposed for combating multi-dimensional (M-D) bursts of errors. A new concept of basis interleaving array is introduced. By combining different basis arrays, effective M-D interleaving can be realized. It has been shown that this algorithm can be implemented only once and yet optimal for a set of error bursts having different sizes for a given two-dimensional (2-D) array. To adapt to variable channel conditions, a novel rate allocation technique is proposed for FineGranular Scalability (FGS) coded video, in which real data based rate-distortion modeling is developed, constant quality constraint is adopted and sliding window approach is proposed to adapt to the variable channel conditions. By using the proposed technique, constant quality is realized among frames by solving a set of linear functions. Thus, significant computational simplification is achieved compared with the state-of-the-art techniques. The reduction of the overall distortion is obtained at the same time. To combat the random error during the transmission, an unequal error protection (UEP) method and a robust error-concealment strategy are proposed for scalable coded video bitstreams

The JPEG 2000 still image compression standard

With the increasing use of multimedia technologies, image compression requires higher performance as well as new features. To address this need in the specific area of still image encoding, a new standard is currently being developed, the JPEC2000. It is not only intended to provide rate-distortion and subjective image quality performance superior to existing standards, but also to provide features and functionalities that current standards can either not address efficiently or in many cases cannot address at all. Lossless and lossy compression, embedded lossy to lossless coding, progressive transmission by pixel accuracy and by resolution, robustness to the presence of bit-errors and region-of-interest coding, are some representative features. It is interesting to note that JPEG2000 is being designed to address the requirements of a diversity of applications, e.g. Internet, color facsimile, printing, scanning, digital photography, remote sensing, mobile applications, medical imagery, digital library and E-commerce