277 research outputs found

    On the Utility of Representation Learning Algorithms for Myoelectric Interfacing

    Get PDF
    Electrical activity produced by muscles during voluntary movement is a reflection of the firing patterns of relevant motor neurons and, by extension, the latent motor intent driving the movement. Once transduced via electromyography (EMG) and converted into digital form, this activity can be processed to provide an estimate of the original motor intent and is as such a feasible basis for non-invasive efferent neural interfacing. EMG-based motor intent decoding has so far received the most attention in the field of upper-limb prosthetics, where alternative means of interfacing are scarce and the utility of better control apparent. Whereas myoelectric prostheses have been available since the 1960s, available EMG control interfaces still lag behind the mechanical capabilities of the artificial limbs they are intended to steer—a gap at least partially due to limitations in current methods for translating EMG into appropriate motion commands. As the relationship between EMG signals and concurrent effector kinematics is highly non-linear and apparently stochastic, finding ways to accurately extract and combine relevant information from across electrode sites is still an active area of inquiry.This dissertation comprises an introduction and eight papers that explore issues afflicting the status quo of myoelectric decoding and possible solutions, all related through their use of learning algorithms and deep Artificial Neural Network (ANN) models. Paper I presents a Convolutional Neural Network (CNN) for multi-label movement decoding of high-density surface EMG (HD-sEMG) signals. Inspired by the successful use of CNNs in Paper I and the work of others, Paper II presents a method for automatic design of CNN architectures for use in myocontrol. Paper III introduces an ANN architecture with an appertaining training framework from which simultaneous and proportional control emerges. Paper Iv introduce a dataset of HD-sEMG signals for use with learning algorithms. Paper v applies a Recurrent Neural Network (RNN) model to decode finger forces from intramuscular EMG. Paper vI introduces a Transformer model for myoelectric interfacing that do not need additional training data to function with previously unseen users. Paper vII compares the performance of a Long Short-Term Memory (LSTM) network to that of classical pattern recognition algorithms. Lastly, paper vIII describes a framework for synthesizing EMG from multi-articulate gestures intended to reduce training burden

    Accessibility of Health Data Representations for Older Adults: Challenges and Opportunities for Design

    Get PDF
    Health data of consumer off-the-shelf wearable devices is often conveyed to users through visual data representations and analyses. However, this is not always accessible to people with disabilities or older people due to low vision, cognitive impairments or literacy issues. Due to trade-offs between aesthetics predominance or information overload, real-time user feedback may not be conveyed easily from sensor devices through visual cues like graphs and texts. These difficulties may hinder critical data understanding. Additional auditory and tactile feedback can also provide immediate and accessible cues from these wearable devices, but it is necessary to understand existing data representation limitations initially. To avoid higher cognitive and visual overload, auditory and haptic cues can be designed to complement, replace or reinforce visual cues. In this paper, we outline the challenges in existing data representation and the necessary evidence to enhance the accessibility of health information from personal sensing devices used to monitor health parameters such as blood pressure, sleep, activity, heart rate and more. By creating innovative and inclusive user feedback, users will likely want to engage and interact with new devices and their own data

    Brain Computations and Connectivity [2nd edition]

    Get PDF
    This is an open access title available under the terms of a CC BY-NC-ND 4.0 International licence. It is free to read on the Oxford Academic platform and offered as a free PDF download from OUP and selected open access locations. Brain Computations and Connectivity is about how the brain works. In order to understand this, it is essential to know what is computed by different brain systems; and how the computations are performed. The aim of this book is to elucidate what is computed in different brain systems; and to describe current biologically plausible computational approaches and models of how each of these brain systems computes. Understanding the brain in this way has enormous potential for understanding ourselves better in health and in disease. Potential applications of this understanding are to the treatment of the brain in disease; and to artificial intelligence which will benefit from knowledge of how the brain performs many of its extraordinarily impressive functions. This book is pioneering in taking this approach to brain function: to consider what is computed by many of our brain systems; and how it is computed, and updates by much new evidence including the connectivity of the human brain the earlier book: Rolls (2021) Brain Computations: What and How, Oxford University Press. Brain Computations and Connectivity will be of interest to all scientists interested in brain function and how the brain works, whether they are from neuroscience, or from medical sciences including neurology and psychiatry, or from the area of computational science including machine learning and artificial intelligence, or from areas such as theoretical physics

    Internet and Biometric Web Based Business Management Decision Support

    Get PDF
    Internet and Biometric Web Based Business Management Decision Support MICROBE MOOC material prepared under IO1/A5 Development of the MICROBE personalized MOOCs content and teaching materials Prepared by: A. Kaklauskas, A. Banaitis, I. Ubarte Vilnius Gediminas Technical University, Lithuania Project No: 2020-1-LT01-KA203-07810

    Exploring Animal Behavior Through Sound: Volume 1

    Get PDF
    This open-access book empowers its readers to explore the acoustic world of animals. By listening to the sounds of nature, we can study animal behavior, distribution, and demographics; their habitat characteristics and needs; and the effects of noise. Sound recording is an efficient and affordable tool, independent of daylight and weather; and recorders may be left in place for many months at a time, continuously collecting data on animals and their environment. This book builds the skills and knowledge necessary to collect and interpret acoustic data from terrestrial and marine environments. Beginning with a history of sound recording, the chapters provide an overview of off-the-shelf recording equipment and analysis tools (including automated signal detectors and statistical methods); audiometric methods; acoustic terminology, quantities, and units; sound propagation in air and under water; soundscapes of terrestrial and marine habitats; animal acoustic and vibrational communication; echolocation; and the effects of noise. This book will be useful to students and researchers of animal ecology who wish to add acoustics to their toolbox, as well as to environmental managers in industry and government

    25th Annual Computational Neuroscience Meeting: CNS-2016

    Get PDF
    Abstracts of the 25th Annual Computational Neuroscience Meeting: CNS-2016 Seogwipo City, Jeju-do, South Korea. 2–7 July 201

    A Design Science Research Approach to Architecting and Developing Information Systems for Collaborative Manufacturing : A Case for Human-Robot Collaboration

    Get PDF
    Konseptointi- ja suunnitteluvaiheessa sekä valmistuksen, käytön ja kehitysprosessin aikana syntyy tietoa, jonka hyödyntämisessä on valtavaa potentiaalia liike-elämän ja tuotantoprosessien muuttamiseen. Neljännen teollisen vallankumouksen ytimessä oleva digitaalinen muutos tunnistaa tämän painottaen erityisesti tämän tiedon yhdistämistä toimintojen ja järjestelmien tukemiseksi läpi tuotteen elinkaareen, mitä kutsutaan digitaaliseksi säikeen kehykseksi (digital thread framework). Tämän väitöskirjan tavoitteena on kehittää ja käyttää yhtä tällaista viitekehystä ihmisen ja robotin yhteistoiminnan asiayhteydessä. Tämä kehys pyrkii vastaamaan merkittävään ongelmaan, joka liittyy mukautuvuuden ja joustavuuden abstrakteihin ominaisuuksiin. Nykyiset ihmisen ja robotin yhteistyöjärjestelmät (human-robot collaboration (HRC)) on rakennettu pääasiassa pysyviksi järjestelmiksi, jotka sivuuttavat ihmisten intuitiivisen toiminnan asettamalla heidän roolinsa yhteistyötehtävissä etukäteen määritellyiksi. Lisäksi järjestelmien kyky vaihtaa tuotteesta toiseen on rajoittunutta. Tämä on erityisen ongelmallista nykyisellä laajan tuotevalikoiman aikakaudella, joka johtuu asiakkaiden räätälöidyistä vaatimuksista. Tähän taustaan vastaten, tämä väitöskirja käyttää design science research methodology -menetelmää suunnitellakseen, kehittääkseen ja ottaakseen käyttöön kolme pääasiallista artefaktia ihmisen ja robotin yhteistyösolussa laboratorioympäristössä. Ensimmäinen on digitaalisen säikeen kehys (digital thread framework), joka integroi tuotesuunnitteluympäristön toimijaksi monitoimijajärjestelmään käyttäen uusimpia tietoon perustuvia suunnittelujärjestelmiä, mikä tarjoaa prosessin toimijoille pääsyn tuotesuunnittelumalleihin reaaliajassa. Toinen on lisätyn todellisuuden malli, joka tarjoaa rajapinnan kokoonpanotehtävässä yhteistyöhön osallistuvan ihmisoperaattorin ja edellä mainitun kehyksen välille. Kolmas on tukitietomalli, jota yhteistyötä tekevät toimijat käyttävät tietopohjanaan täyttääkseen yhteistyössä tapahtuvan kokoonpanon tavoitteet mukautuvasti. Näitä kehitettyjä artefakteja käytettiin kokonaisuutena tapaustutkimuksissa, jotka liittyivät aidon dieselmoottorin kokoonpanoon, ja joissa todennettiin niiden hyödyllisyys ja että ne lisäävät joustavuutta, jota varten kehys (framework) suunniteltiin. Rajauslaatikoiden näyttäminen skaalautuvana informaationa, joka hahmottaa alikokoonpanon osien geometriaa, demostroi kehitettyjen artefaktien käytettävyyttä yhteistyötä tekevien toimijoiden aikomuksia heijastavien laajennetun todellisuuden projektioiden tuottamiseksi. Yhteenvetona tämän väitöskirjan tuloksena syntyi lähestymistapa älykkään ja mukautuvan robotiikan toteuttamiseksi hyödyntäen tietovirtoja ja mallinnusta ihmisen ja robotin yhteistoiminnan kontekstissa. Teollisuuden raportoima älykkäästi mukautuvien HRC-järjestelmien puute taas toimi osaltaan motivaationa tähän väitöskirjassa tehtyyn työhön. Kun tulevaisuuden tuotteet ja tuotantojärjestelmät muuttuvat monimutkaisemmiksi, tietojärjestelmiltä odotetaan suurempaa vastuuta korvaamaan ihmisen työmuistin luontaiset rajat ja mahdollistamaan siirtyminen kohti ihmiskeskeistä valmistusta, joihin viitataan termeillä Operator 4.0 ja Industry 5.0. Näin ollen on odotettavissa, että tietojärjestelmien tutkimus, kuten tämä väitöskirja, voi auttaa ottamaan merkittäviä askeleita tähän suuntaan.Information generated from the conceptualization, design, manufacturing, and use of a product has immense potential in transforming both the business and manufacturing processes of the manufacturing enterprise. The digital transformation at the heart of the fourth industrial revolution has acknowledged this with a special emphasis on weaving a thread of this information to support functions and systems throughout the life cycle of the product with what is known as a digital thread framework. This dissertation aims to develop and use one such framework in the context of human-robot collaborative assembly. The overarching problem that the framework aims to solve can be attributed to the abstract qualities of adaptability and flexibility. The human-robot collaboration (HRC) systems of today are built predominantly as static systems and ignore the intuitive role of humans by having their roles in collaborative tasks pre-defined. Furthermore, their ability to switch between products during product changeovers is also limited. This is especially problematic in the current era of product variety, stemming from the customised requirements of customers. To this end, this dissertation employs the design science research methodology to design, develop, and deploy predominantly three artefacts in a human-robot work cell in a laboratory setting. The first is the digital thread framework that integrates the product design environment using state-of-the-art knowledge-based engineering systems, as an agent of a multi-agent system, which provide the collaborative human-robot agents with access to product design models at run time. The second is a constituent mixed-reality model that provides an interface for the foregoing framework for the human operator engaged in collaborative assembly. The third is a supporting information model that the agents use as their knowledge base to fulfil adaptively the goals of collaborative assembly. Together, these developed artefacts were employed in case studies involving a real diesel engine assembly during which they were observed to provide utility and support the cause of adaptability for which the framework was designed. The identification of bounding boxes as a scalable information construct, that approximates the part geometry of the sub-assembly components, demonstrates the utility of the developed artefacts for spatially augmenting them as projections as intentions of collaborating agents. In summary, this dissertation contributes with an approach towards realising intelligent and adaptive robotics within the realms of information flows and modelling in the context of human-robot collaboration. The lack of intelligently adaptable HRC systems reported by the industry in part motivated the work undertaken in this dissertation. As future products and production systems become more complex, information systems are expected to assume greater responsibility to compensate for the inherent limits of the human working memory and enable transition towards a human-centred manufacturing, the current likes of which are labelled as Operator 4.0 and Industry 5.0. Thus, the expectation is that information systems research, such as this dissertation, can help take significant strides forward in this direction
    corecore