Interference Management of Inband Underlay Device-toDevice Communication in 5G Cellular Networks

The explosive growth of data traffic demands, emanating from smart mobile devices and bandwidth-consuming applications on the cellular network poses the need to drastically modify the cellular network architecture. A challenge faced by the network operators is the inability of the finite spectral resources to support the growing data traffic. The Next Generation Network (NGN) is expected to meet defined requirements such as massively connecting billions of devices with heterogeneous applications and services through enhanced mobile broadband networks, which provides higher data rates with improved network reliability and availability, lower end-to-end latency and increased energy efficiency. Device-to-Device (D2D) communication is one of the several emerging technologies that has been proposed to support NGN in meeting these aforementioned requirements. D2D communication leverages the proximity of users to provide direct communication with or without traversing the base station. Hence, the integration of D2D communication into cellular networks provides potential gains in terms of throughput, energy efficiency, network capacity and spectrum efficiency. D2D communication underlaying a cellular network provides efficient utilisation of the scarce spectral resources, however, there is an introduction of interference emanating from the reuse of cellular channels by D2D pairs. Hence, this dissertation focuses on the technical challenge with regards to interference management in underlay D2D communication. In order to tackle this challenge to be able to exploit the potentials of D2D communication, there is the need to answer some important research questions concerning the problem. Thus, the study aims to find out how cellular channels can be efficiently allocated to D2D pairs for reuse as an underlay to cellular network, and how mode selection and power control approaches influence the degree of interference caused by D2D pairs to cellular users. Also, the research study continues to determine how the quality of D2D communication can be maintained with factors such as bad channel quality or increased distance. In addressing these research questions, resource management techniques of mode selection, power control, relay selection and channel allocation are applied to minimise the interference caused by D2D pairs when reusing cellular channels to guarantee the Quality of Service (QoS) of cellular users, while optimally improving the number of permitted D2D pairs to reuse channels. The concept of Open loop power control scheme is examined in D2D communication underlaying cellular network. The performance of the fractional open loop power control components on SINR is studied. The simulation results portrayed that the conventional open loop power control method provides increased compensation for the path loss with higher D2D transmit power when compared with the fractional open loop power control method. Furthermore, the problem of channel allocation to minimise interference is modelled in two system model scenarios, consisting of cellular users coexisting with D2D pairs with or without relay assistance. The channel allocation problem is solved as an assignment problem by using a proposed heuristic channel allocation, random channel allocation, Kuhn-Munkres (KM) and Gale-Shapley (GS) algorithms. A comparative performance evaluation for the algorithms are carried out in the two system model scenarios, and the results indicated that D2D communication with relay assistance outperformed the conventional D2D communication without relay assistance. This concludes that the introduction of relay-assisted D2D communication can improve the quality of a network while utilising the available spectral resources without additional infrastructure deployment costs. The research work can be extended to apply an effective relay selection approach for a user mobility scenario

Recent Advances in Cellular D2D Communications

Device-to-device (D2D) communications have attracted a great deal of attention from researchers in recent years. It is a promising technique for offloading local traffic from cellular base stations by allowing local devices, in physical proximity, to communicate directly with each other. Furthermore, through relaying, D2D is also a promising approach to enhancing service coverage at cell edges or in black spots. However, there are many challenges to realizing the full benefits of D2D. For one, minimizing the interference between legacy cellular and D2D users operating in underlay mode is still an active research issue. With the 5th generation (5G) communication systems expected to be the main data carrier for the Internet-of-Things (IoT) paradigm, the potential role of D2D and its scalability to support massive IoT devices and their machine-centric (as opposed to human-centric) communications need to be investigated. New challenges have also arisen from new enabling technologies for D2D communications, such as non-orthogonal multiple access (NOMA) and blockchain technologies, which call for new solutions to be proposed. This edited book presents a collection of ten chapters, including one review and nine original research works on addressing many of the aforementioned challenges and beyond

Efficient offloading and load distribution based on D2D relaying and UAVs for emergent wireless networks

The device to device (D2D) and unmanned aerial vehicle (UAV) communications are considered as enabling technologies of the emergent 5th generation of wireless and cellular system (5G). Consequently, it is important to determine their corresponding performance with respect to the 5G requirements. In particular, we focus on enhancing the offloading and load balancing performance in three directions. In the first direction, we study the achievable data rate of user relay assisting other users in two-tier networks. We propose a novel heuristic communication scheme called device-for-device (D4D). The D4D enables moving users to share their resource by taking advantage of cooperative communication. We study the moving user rate sensitivity to the relay selection and blocking probability. In the second direction, we study the offloading from macrocell to small cell and load balancing among small cell. Also, we design a new utility weight function that enables a balanced relay assignment. We propose a novel low complexity algorithm for centralized scheme maximizing the load among small cells as well as users subject to SINR threshold constraints. The simulations show that our proposed schemes achieve performance in load balancing compared to those obtained with the previous or traditional method. In the third direction, we study the 3D deployment of multiple UAVs for emergent on-demand offloading. We propose a novel on-demand deployment scheme based on maximizing both the operator’s profit and the quality of service. The proposed scheme is based on solving a non-convex problem by combining k-means clustering with pattern search to find the suboptimal location of UAVs. The simulation results show that our proposed scheme maximizes the operator’s profit and improves offloading traffic efficiency. Our global contribution was the development of a scheme to improve the quality of service and the performance in emergent networks through the improvement of the load distribution and resource sharing using D2D and UAV

Machine Learning for Unmanned Aerial System (UAS) Networking

Fueled by the advancement of 5G new radio (5G NR), rapid development has occurred in many fields. Compared with the conventional approaches, beamforming and network slicing enable 5G NR to have ten times decrease in latency, connection density, and experienced throughput than 4G long term evolution (4G LTE). These advantages pave the way for the evolution of Cyber-physical Systems (CPS) on a large scale. The reduction of consumption, the advancement of control engineering, and the simplification of Unmanned Aircraft System (UAS) enable the UAS networking deployment on a large scale to become feasible. The UAS networking can finish multiple complex missions simultaneously. However, the limitations of the conventional approaches are still a big challenge to make a trade-off between the massive management and efficient networking on a large scale. With 5G NR and machine learning, in this dissertation, my contributions can be summarized as the following: I proposed a novel Optimized Ad-hoc On-demand Distance Vector (OAODV) routing protocol to improve the throughput of Intra UAS networking. The novel routing protocol can reduce the system overhead and be efficient. To improve the security, I proposed a blockchain scheme to mitigate the malicious basestations for cellular connected UAS networking and a proof-of-traffic (PoT) to improve the efficiency of blockchain for UAS networking on a large scale. Inspired by the biological cell paradigm, I proposed the cell wall routing protocols for heterogeneous UAS networking. With 5G NR, the inter connections between UAS networking can strengthen the throughput and elasticity of UAS networking. With machine learning, the routing schedulings for intra- and inter- UAS networking can enhance the throughput of UAS networking on a large scale. The inter UAS networking can achieve the max-min throughput globally edge coloring. I leveraged the upper and lower bound to accelerate the optimization of edge coloring. This dissertation paves a way regarding UAS networking in the integration of CPS and machine learning. The UAS networking can achieve outstanding performance in a decentralized architecture. Concurrently, this dissertation gives insights into UAS networking on a large scale. These are fundamental to integrating UAS and National Aerial System (NAS), critical to aviation in the operated and unmanned fields. The dissertation provides novel approaches for the promotion of UAS networking on a large scale. The proposed approaches extend the state-of-the-art of UAS networking in a decentralized architecture. All the alterations can contribute to the establishment of UAS networking with CPS

Mobility and resource management for 5G heterogeneous networks

The conventional topology of current cellular networks is a star structure, where central control points usually serve as base stations (BSs). This provides the advantage of simplicity while still providing quality of service (QoS). For next-generation networks, however, this topology is disadvantageous and difficult to use due to the insufficient availability of network access. The hybrid topology radio network will thus naturally be the future mobile access network that can help to overcome current and future challenges efficiently. Therefore, relay technology can play an important role in a hybrid cellular network topology. Today, with the recent long-term evolution-advanced (LTE-A) standards, the 3rd Generation Partnership Project (3GPP) supports a single-hop relay technology in which the radio access link between the BS and users is relayed by only one relay station (RS). With the help of multi-hop relay, however, the radio link between the BS and users can be extended to more than two hops to improve the coverage and network capacity. Multiple hops to transmit data to and from the corresponding BS results in the reduction of path loss. However, using a multi-hop relay system requires more radio resources to transmit data through different hops. More interference is also created due to a greater number of simultaneous transmissions in the network. New mobility and resource management schemes are thus important for achieving a high QoS while increasing the whole network capacity. In the first part, the problem of relay selection and radio resource allocation is studied, and choosing how the bandwidth should be shared between direct, backhaul, and access links in multi-hop relay networks is discussed. In such a network, resource allocation plays a critical role because it manages channel access in both time and frequency domains and determines how resources are allocated for different links. The proposed solution includes a nonlinear programming technique and a heuristic method. First, the problem formulation of resource allocation and relay selection is presented to provide an integrated framework for multi-hop relay networks. Second, an analytical solution to the problem is presented using a nonlinear programming technique. Finally, an iterative two-stage algorithm is presented to address the joint resource allocation and relay selection problem in multi-hop relay networks Under backhaul and capacity limitation constraints. In particular, the first stage proposed a fast approximation analytical solution for a resource allocation algorithm that takes into account the trade-off between the optimality and the complexity of the multi-hop relay architecture; the second stage presented a heuristic relay selection strategy that considers the RS load and helps to keep the relay from being overloaded is proposed. In the second part, the mobility problem in downlink multi-hop relay networks is addressed. In addition to the resource allocation issue, the relay selection problem is studied from a network layer perspective. Therefore, this part includes the issue of radio path selection. As an alternative to the heuristic algorithm developed in the previous part, the presented work describes the development and evaluation of a relay-selection scheme based on a Markov decision process (MDP) that considers the RS load and the existing radio-link path to improve handoff performance. First, the problem formulation of resource allocation and relay selection is presented. Second, an MDP mathematical model is developed to solve the relay selection problem in a decentralized way and to make the selection process simple. This relay selection scheme has the objective of maintaining the throughput and ensuring seamless mobility and service continuity to all mobile terminals while reducing the handoff frequency and improving handoff performance. In the third part, the admission and power control problem of a general heterogeneous network (HetNet) consisting of several small cells (SCs) is solved. Compared to the first two parts of this work, the system is expanded from a multi-hop RS to a general SC context. This part therefore focuses only on the access link problem, assuming the capacity of the SC backhaul links are large enough not to be bottlenecks. This part mainly deals with the problem of how to maximize the number of admitted users in an overloaded system while minimizing the transmit power given a certain QoS level. First, the problem is formulated to address concerns about QoS requirements in a better way. Second, a Voronoi-based user association scheme for maximizing the number of admitted users in the system under QoS and capacity limitation constraints is proposed to find near-optimal solutions. Finally, a twostage algorithm is presented to address the joint admission and power control problem in a downlink heterogeneous SC network. In particular, the first stage proposes a dynamic call admission control policy that considers the SC load and call-level QoS while also helping to keep the system from being overloaded. The second stage presents an adaptive power allocation strategy that considers both user distribution and the density of SCs in HetNets. Finally, the proposed solutions are evaluated using extensive numerical simulations, and the numerical results are presented to provide a comparison with related works found in the literature

D3.2 First performance results for multi -node/multi -antenna transmission technologies

This deliverable describes the current results of the multi-node/multi-antenna technologies investigated within METIS and analyses the interactions within and outside Work Package 3. Furthermore, it identifies the most promising technologies based on the current state of obtained results. This document provides a brief overview of the results in its first part. The second part, namely the Appendix, further details the results, describes the simulation alignment efforts conducted in the Work Package and the interaction of the Test Cases. The results described here show that the investigations conducted in Work Package 3 are maturing resulting in valuable innovative solutions for future 5G systems.Fantini. R.; Santos, A.; De Carvalho, E.; Rajatheva, N.; Popovski, P.; Baracca, P.; Aziz, D.... (2014). D3.2 First performance results for multi -node/multi -antenna transmission technologies. http://hdl.handle.net/10251/7675

Radio resource management techniques for QoS provision in 5G networks

Premi extraordinari doctorat UPC curs 2017-2018. Àmbit d’Enginyeria de les TICAs numerous mobile applications and over-the-top (OTT) services emerge and mobile Internet connectivity becomes ubiquitous, the provision of high quality of service (QoS) is more challenging for mobile network operators (MNOs). Research efforts focus on the development of innovative resource management techniques and have introduced the long term evolution advanced (LTE-A) communication standard. Novel business models make the growth of network capacity sustainable by enabling MNOs to combine their resources. The fifth generation (5G) mobile networks will involve technologies and business stakeholders with different capabilities and demands that may affect the QoS provision, requiring efficient radio resource sharing. The need for higher network capacity has introduced novel technologies that improve resource allocation efficiency. Direct connectivity among user equipment terminals (UEs) circumventing the LTE-A infrastructure alleviates the network overload. Part of mobile traffic is offloaded to outband device-to-device (D2D) connections (in unlicensed spectrum) enabling data exchange between UEs directly or via UEs-relays. Still, MNOs need additional spectrum resources and infrastructure. The inter-operator network sharing concept has emerged motivating the adoption of virtualization that enables network slicing, i.e., dynamic separation of resources in virtual slices (VSs). VSs are managed in isolation by different tenants using software defined networking and encompass core and radio access network resources allocated periodically to UEs. When UEs access OTT applications, flows with different QoS demands and priorities determined by OTT service providers (OSPs) are generated. OSPs’ policies should be considered in VS allocation. The coexisting technologies, business models and stakeholders require sophisticated radio resource management (RRM) techniques. To that end, RRM is performed in a complex ecosystem. When D2D communication involves data concurrently downloaded by the mobile network, QoS may be affected by LTE-A network parameters (resource scheduling policy, downlink channel conditions). It is also affected by the relay selection, as UEs may not be willing to help unknown UE pairs and UEs’ social ties in mobile applications may influence willingness for D2D cooperation. Thus, effective medium access control (MAC) mechanisms should coordinate D2D transmissions employing advanced techniques, e.g., network coding (NC). When UEs access OTT applications, OSPs’ policies are not considered by MNOs in RRM and OSPs cannot apply flow prioritization. Network neutrality issues also arise when OSPs claim resources from MNOs aiming to minimize grade of service (GoS). OSPs’ intervention may delay flows’ accommodation due to the time required for OSP-MNO interaction and the time the flows spent waiting for resources. This thesis proposes novel solutions to the RRM issues of outband D2D communication and VS allocation for OSPs in 5G networks. We present a cooperative D2D MAC protocol that leverages the opportunities for NC in D2D communication under the influence of LTE-A network parameters and its throughput performance analysis. The protocol improves D2D throughput and energy efficiency, especially for UEs with better downlink channel conditions. We next introduce social awareness in D2D MAC design and present a social-aware cooperative D2D MAC protocol that employs UEs’ social ties to promote the use of friendly relays reducing the total energy consumption. Motivated by the lack of approaches for OSP-oriented RRM, we present a novel flow prioritization algorithm based on matching theory that applies OSPs’ policies respecting the network neutrality and the analysis of its GoS and delay performance. The algorithm maintains low overhead and delay without affecting fairness among OSPs. Our techniques highlight the QoS improvement induced by the joint consideration of different technologies and business stakeholders in RRM design.A medida que varias aplicaciones móviles y servicios over-the-top (OTT) surgen y el Internet móvil se vuelve ubicua, la prestación de alta calidad de servicio (QoS) es desafiante para los operadores de red móvil (MNOs). Los estudios de investigación se enfocan en técnicas innovadoras para la gestión de recursos de red y han resultado en la especificación del estándar de comunicación long term evolution advanced (LTE-A). Modelos comerciales nuevos hacen que el crecimiento de la capacidad de red sea sostenible al permitir que MNOs combinen sus recursos. La quinta generación (5G) de redes móviles implicará tecnologías y partes comerciales interesadas con varias habilidades y demandas que pueden afectar la provisión de QoS y demandan la gestión eficaz de recursos de radio. La necesidad de capacidad de red más alta ha introducido tecnologías que hacen más eficiente la asignación de recursos. La conectividad directa entre terminales de equipos de usuarios (UEs) eludiendo la infraestructura LTE-A alivia la sobrecarga de red. Parte del tráfico es dirigido a conexiones de dispositivo a dispositivo (D2D) outband permitiendo la comunicación de UEs directamente o con relés. Los MNOs necesitan nuevos recursos de espectro e infraestructura. El intercambio de recursos entre MNOs ha surgido motivando la adopción de virtualización que realiza la segmentación de red i.e., la separación dinámica de recursos en trozos virtuales (VSs). Los VSs son administrados de forma aislada por inquilinos diferentes con software defined networking y abarcan recursos de red core y radio access asignadas periódicamente a UEs. Cuando UEs usan aplicaciones OTT, flujos de aplicación con demandas y prioridades definidas por proveedores de servicios OTT (OSPs) se generan. Las políticas de OSPs deben ser integradas en la asignación de VSs. La coexistencia de varias tecnologías y partes comerciales demanda técnicas sofisticadas de gestión de recursos radio (RRM). Con ese fin, la RRM se realiza en un ecosistema complejo. Si la comunicación D2D involucra datos descargados simultáneamente por la red móvil, los parámetros de red LTE-A (política de scheduling de recursos, condiciones de canal downlink) afectan el QoS. La selección de relés afecta el rendimiento porque los UEs no desean siempre ayudar a UEs desconocidos. Las relaciones sociales de los UEs en aplicaciones móviles pueden determinar la voluntad para la comunicación cooperativa D2D. Por lo tanto, mecanismos de control de acceso al medio (MAC) deben coordinar las transmisiones D2D con técnicas avanzadas ej., codificación de red. Si los UEs usan servicios OTT, las políticas de OSPs no son consideradas en RRM y los OSPs no emplean flujos prioritarios. Problemas de neutralidad de red surgen cuando los OSPs reclaman recursos de MNOs para minimizar el grado de servicio (GoS). La intervención de OSPs puede causar retraso en el servicio de flujos debido a la interacción OSP-MNO y el tiempo requerido para que los flujos reciban recursos. Esta tesis presenta soluciones nuevas para los problemas RRM de comunicación D2D outband y asignación de VSs a OSPs en redes 5G. Proponemos un protocolo D2D MAC cooperativo que explota las oportunidades de NC bajo la influencia de parámetros de red LTE-A y su análisis de rendimiento. El protocolo mejora el rendimiento y la eficiencia energética especialmente para UEs con mejores condiciones de canal downlink. Introducimos la conciencia social en el D2D MAC y proponemos un protocolo que utiliza relaciones sociales de UEs para elegir relés-amigos y reduce el consumo de energía. Dada la falta de técnicas que aborden el problema RRM de OSPs presentamos un algoritmo que aplique políticas de OSPs y respete la neutralidad usando la teoría de matching, y su análisis de GoS y retraso. El algoritmo induce bajo coste y retraso sin afectar la imparcialidad entre OSPs. Estas técnicas demuestran la mejora de QoS gracias a la consideración de tecnologas y partes comerciales diferentes en RRM.Award-winningPostprint (published version

Analytical Performance Evaluation of Cooperative and Multi-Radio Concepts in Emerging Wireless Networks

<br/