111,158 research outputs found
R&D Paths of Pixel Detectors for Vertex Tracking and Radiation Imaging
This report reviews current trends in the R&D of semiconductor pixellated
sensors for vertex tracking and radiation imaging. It identifies requirements
of future HEP experiments at colliders, needed technological breakthroughs and
highlights the relation to radiation detection and imaging applications in
other fields of science.Comment: 17 pages, 2 figures, submitted to the European Strategy Preparatory
Grou
Testing sTGC with small angle wire edges for the ATLAS New Small Wheel Muon Detector Upgrade
The LHC upgrade scheduled for 2018 is expected to significantly increase the
accelerator's luminosity, and as a result the radiation background rates in the
ATLAS Muon Spectrometer will increase too. Some of its components will have to
be replaced in order to cope with these high rates. Newly designed small-strip
Thin Gap chambers (sTGC) will replace them at the small wheel region. One of
the differences between the sTGC and the currently used TGC is the alignment of
the wires along the azimuthal direction. As a result, the outermost wires
approach the detector's edge with a small angle. Such a configuration may be a
cause for various problems. Two small dedicated chambers were built and tested
in order to study possible edge effects that may arise from the new
configuration. The sTGC appears to be stable and no spark have been observed,
yet some differences in the detector response near the edge is seen and further
studies should be carried out.Comment: ANIMMA 2015 Conference proceedings, 20-24 April 2015, Lisbon,
Portuga
Recommended from our members
A biologically inspired spiking model of visual processing for image feature detection
To enable fast reliable feature matching or tracking in scenes, features need to be discrete and meaningful, and hence edge or corner features, commonly called interest points are often used for this purpose. Experimental research has illustrated that biological vision systems use neuronal circuits to extract particular features such as edges or corners from visual scenes. Inspired by this biological behaviour, this paper proposes a biologically inspired spiking neural network for the purpose of image feature extraction. Standard digital images are processed and converted to spikes in a manner similar to the processing that transforms light into spikes in the retina. Using a hierarchical spiking network, various types of biologically inspired receptive fields are used to extract progressively complex image features. The performance of the network is assessed by examining the repeatability of extracted features with visual results presented using both synthetic and real images
A review of advances in pixel detectors for experiments with high rate and radiation
The Large Hadron Collider (LHC) experiments ATLAS and CMS have established
hybrid pixel detectors as the instrument of choice for particle tracking and
vertexing in high rate and radiation environments, as they operate close to the
LHC interaction points. With the High Luminosity-LHC upgrade now in sight, for
which the tracking detectors will be completely replaced, new generations of
pixel detectors are being devised. They have to address enormous challenges in
terms of data throughput and radiation levels, ionizing and non-ionizing, that
harm the sensing and readout parts of pixel detectors alike. Advances in
microelectronics and microprocessing technologies now enable large scale
detector designs with unprecedented performance in measurement precision (space
and time), radiation hard sensors and readout chips, hybridization techniques,
lightweight supports, and fully monolithic approaches to meet these challenges.
This paper reviews the world-wide effort on these developments.Comment: 84 pages with 46 figures. Review article.For submission to Rep. Prog.
Phy
Balloon-borne coded aperture telescope for arc-minute angular resolution at hard x-ray energies
We are working on the development of a new balloon-borne telescope, MARGIE (minute-of-arc resolution gamma ray imaging experiment). It will be a coded aperture telescope designed to image hard x-rays (in various configurations) over the 20 - 600 keV range with an angular resolution approaching one arc minute. MARGIE will use one (or both) of two different detection plane technologies, each of which is capable of providing event locations with sub-mm accuracies. One such technology involves the use of cadmium zinc telluride (CZT) strip detectors. We have successfully completed a series of laboratory measurements using a prototype CZT detector with 375 micron pitch. Spatial location accuracies of better than 375 microns have been demonstrated. A second type of detection plane would be based on CsI microfiber arrays coupled to a large area silicon CCD readout array. This approach would provide spatial resolutions comparable to that of the CZT prototype. In one possible configuration, the coded mask would be 0.5 mm thick tungsten, with 0.5 mm pixels at a distance of 1.5 m from the central detector giving an angular resolution of 1 arc-minute and a fully coded field of view of 12 degrees. We review the capabilities of the MARGIE telescope and report on the status of our development efforts and our plans for a first balloon flight
CMOS-Compatible Room-Temperature Rectifier Toward Terahertz Radiation Detection
In this paper, we present a new rectifying device, compatible with the technology of CMOS image sensors, suitable for implementing a direct-conversion detector operating at room temperature for operation at up to terahertz frequencies. The rectifying device can be obtained by introducing some simple modifications of the charge-storage well in conventional CMOS integrated circuits, making the proposed solution easy to integrate with the existing imaging systems. The rectifying device is combined with the different elements of the detector, composed of a 3D high-performance antenna and a charge-storage well. In particular, its position just below the edge of the 3D antenna takes maximum advantage of the high electric field concentrated by the antenna itself. In addition, the proposed structure ensures the integrity of the charge-storage well of the detector. In the structure, it is not necessary to use very scaled and costly technological nodes, since the CMOS transistor only provides the necessary integrated readout electronics. On-wafer measurements of RF characteristics of the designed junction are reported and discussed. The overall performances of the entire detector in terms of noise equivalent power (NEP) are evaluated by combining low-frequency measurements of the rectifier with numerical simulations of the 3D antenna and the semiconductor structure at 1Ă‚Â THz, allowing prediction of the achievable NEP
A Model of High-Frequency Self-Mixing in Double-Barrier Rectifier
In this paper, a new model of the frequency dependence of the double-barrier THz rectifier is presented. The new structure is of interest because it can be realized by CMOS image sensor technology. Its application in a complex field such as that of THz receivers requires the availability of an analytical model, which is reliable and able to highlight the dependence on the parameters of the physical structure. The model is based on the hydrodynamic semiconductor equations, solved in the small signal approximation. The model depicts the mechanisms of the THz modulation of the charge in the depleted regions of the double-barrier device and explains the self-mixing process, the frequency dependence, and the detection capability of the structure. The model thus substantially improves the analytical models of the THz rectification available in literature, mainly based on lamped equivalent circuits
Characterization of Thin p-on-p Radiation Detectors with Active Edges
Active edge p-on-p silicon pixel detectors with thickness of 100 m were
fabricated on 150 mm Float zone silicon wafers at VTT. By combining measured
results and TCAD simulations, a detailed study of electric field distributions
and charge collection performances as a function of applied voltage in a p-on-p
detector was carried out. A comparison with the results of a more conventional
active edge p-on-n pixel sensor is presented. The results from 3D spatial
mapping show that at pixel-to-edge distances less than 100 m the sensitive
volume is extended to the physical edge of the detector when the applied
voltage is above full depletion. The results from a spectroscopic measurement
demonstrate a good functionality of the edge pixels. The interpixel isolation
above full depletion and the breakdown voltage were found to be equal to the
p-on-n sensor while lower charge collection was observed in the p-on-p pixel
sensor below 80 V. Simulations indicated this to be partly a result of a more
favourable weighting field in the p-on-n sensor and partly of lower hole
lifetimes in the p-bulk.Comment: 23 pages, 16 figures, 1 tabl
An X-ray polarimeter for hard X-ray optics
Development of multi-layer optics makes feasible the use of X-ray telescope
at energy up to 60-80 keV: in this paper we discuss the extension of
photoelectric polarimeter based on Micro Pattern Gas Chamber to high energy
X-rays. We calculated the sensitivity with Neon and Argon based mixtures at
high pressure with thick absorption gap: placing the MPGC at focus of a next
generation multi-layer optics, galatic and extragalactic X-ray polarimetry can
be done up till 30 keV.Comment: 12 pages, 7 figure
Module production of the one-arm AFP 3D pixel tracker
The ATLAS Forward Proton (AFP) detector is designed to identify events in
which one or two protons emerge intact from the LHC collisions. AFP will
consist of a tracking detector, to measure the momentum of the protons, and a
time of flight system to reduce the background from multiple proton-proton
interactions. Following an extensive qualification period, 3D silicon pixel
sensors were selected for the AFP tracker. The sensors were produced at CNM
(Barcelona) during 2014. The tracker module assembly and quality control was
performed at IFAE during 2015. The assembly of the first AFP arm and the
following installation in the LHC tunnel took place in February 2016. This
paper reviews the fabrication process of the AFP tracker focusing on the pixel
modules.Comment: PIXEL 2016 proceedings; Submitted to JINS
- …