The Thermal-Constrained Real-Time Systems Design on Multi-Core Platforms -- An Analytical Approach

Over the past decades, the shrinking transistor size enabled more transistors to be integrated into an IC chip, to achieve higher and higher computing performances. However, the semiconductor industry is now reaching a saturation point of Moore’s Law largely due to soaring power consumption and heat dissipation, among other factors. High chip temperature not only significantly increases packing/cooling cost, degrades system performance and reliability, but also increases the energy consumption and even damages the chip permanently. Although designing 2D and even 3D multi-core processors helps to lower the power/thermal barrier for single-core architectures by exploring the thread/process level parallelism, the higher power density and longer heat removal path has made the thermal problem substantially more challenging, surpassing the heat dissipation capability of traditional cooling mechanisms such as cooling fan, heat sink, heat spread, etc., in the design of new generations of computing systems. As a result, dynamic thermal management (DTM), i.e. to control the thermal behavior by dynamically varying computing performance and workload allocation on an IC chip, has been well-recognized as an effective strategy to deal with the thermal challenges. Over the past decades, the shrinking transistor size, benefited from the advancement of IC technology, enabled more transistors to be integrated into an IC chip, to achieve higher and higher computing performances. However, the semiconductor industry is now reaching a saturation point of Moore’s Law largely due to soaring power consumption and heat dissipation, among other factors. High chip temperature not only significantly increases packing/cooling cost, degrades system performance and reliability, but also increases the energy consumption and even damages the chip permanently. Although designing 2D and even 3D multi-core processors helps to lower the power/thermal barrier for single-core architectures by exploring the thread/process level parallelism, the higher power density and longer heat removal path has made the thermal problem substantially more challenging, surpassing the heat dissipation capability of traditional cooling mechanisms such as cooling fan, heat sink, heat spread, etc., in the design of new generations of computing systems. As a result, dynamic thermal management (DTM), i.e. to control the thermal behavior by dynamically varying computing performance and workload allocation on an IC chip, has been well-recognized as an effective strategy to deal with the thermal challenges. Different from many existing DTM heuristics that are based on simple intuitions, we seek to address the thermal problems through a rigorous analytical approach, to achieve the high predictability requirement in real-time system design. In this regard, we have made a number of important contributions. First, we develop a series of lemmas and theorems that are general enough to uncover the fundamental principles and characteristics with regard to the thermal model, peak temperature identification and peak temperature reduction, which are key to thermal-constrained real-time computer system design. Second, we develop a design-time frequency and voltage oscillating approach on multi-core platforms, which can greatly enhance the system throughput and its service capacity. Third, different from the traditional workload balancing approach, we develop a thermal-balancing approach that can substantially improve the energy efficiency and task partitioning feasibility, especially when the system utilization is high or with a tight temperature constraint. The significance of our research is that, not only can our proposed algorithms on throughput maximization and energy conservation outperform existing work significantly as demonstrated in our extensive experimental results, the theoretical results in our research are very general and can greatly benefit other thermal-related research

Allocation of Virtual Machines in Cloud Data Centers - A Survey of Problem Models and Optimization Algorithms

Data centers in public, private, and hybrid cloud settings make it possible to provision virtual machines (VMs) with unprecedented flexibility. However, purchasing, operating, and maintaining the underlying physical resources incurs significant monetary costs and also environmental impact. Therefore, cloud providers must optimize the usage of physical resources by a careful allocation of VMs to hosts, continuously balancing between the conflicting requirements on performance and operational costs. In recent years, several algorithms have been proposed for this important optimization problem. Unfortunately, the proposed approaches are hardly comparable because of subtle differences in the used problem models. This paper surveys the used problem formulations and optimization algorithms, highlighting their strengths and limitations, also pointing out the areas that need further research in the future

EQUAL: Energy and QoS Aware Resource Allocation Approach for Clouds

The popularity of cloud computing is increasing by leaps and bounds. To cope with resource demands of increasing number of cloud users, the cloud market players establish large sized data centers. The huge energy consumption by the data centers and liability of fulfilling Quality of Service (QoS) requirements of the end users have made resource allocation a challenging task. In this paper, energy and QoS aware resource allocation approach which employs Antlion optimization for allocation of resources to virtual machines (VMs) is proposed. It can operate in three modes, namely power aware, performance aware, and balanced mode. The proposed approach enhances energy efficiency of the cloud infrastructure by improving the utilization of resources while fulfilling QoS requirements of the end users. The proposed approach is implemented in CloudSim. The simulation results have shown improvement in QoS and energy efficiency of the cloud

Performance Controlled Power Optimization for Virtualized Internet Datacenters

Modern data centers must provide performance assurance for complex system software such as web applications. In addition, the power consumption of data centers needs to be minimized to reduce operating costs and avoid system overheating. In recent years, more and more data centers start to adopt server virtualization strategies for resource sharing to reduce hardware and operating costs by consolidating applications previously running on multiple physical servers onto a single physical server. In this dissertation, several power efficient algorithms are proposed to effectively reduce server power consumption while achieving the required application-level performance for virtualized servers. First, at the server level this dissertation proposes two control solutions based on dynamic voltage and frequency scaling (DVFS) technology and request batching technology. The two solutions share a performance balancing technique that maintains performance balancing among all virtual machines so that they can have approximately the same performance level relative to their allowed peak values. Then, when the workload intensity is light, we adopt the request batching technology by using a controller to determine the time length for periodically batching incoming requests and putting the processor into sleep mode. When the workload intensity changes from light to moderate, request batching is automatically switched to DVFS to increase the processor frequency for performance guarantees. Second, at the datacenter level, this dissertation proposes a performance-controlled power optimization solution for virtualized server clusters with multi-tier applications. The solution utilizes both DVFS and server consolidation strategies for maximized power savings by integrating feedback control with optimization strategies. At the application level, a multi-input-multi-output controller is designed to achieve the desired performance for applications spanning multiple VMs, on a short time scale, by reallocating the CPU resources and DVFS. At the cluster level, a power optimizer is proposed to incrementally consolidate VMs onto the most power-efficient servers on a longer time scale. Finally, this dissertation proposes a VM scheduling algorithm that exploits core performance heterogeneity to optimize the overall system energy efficiency. The four algorithms at the three different levels are demonstrated with empirical results on hardware testbeds and trace-driven simulations and compared against state-of-the-art baselines

Evolutionary combinatorial optimisation for energy storage scheduling, and web-based power systems analysis using PHP

Two research areas are covered in this thesis: the formulation of a novel evolutionary combinatorial optimisation algorithm for energy storage system (ESS) scheduling, and web-based power systems analysis (WBPSA) using PHP programming. An increase in electricity demand usually calls for reinforcement of the network equipment to handle the new load and network operators sometimes postpone or avoid this reinforcement by using ESS to store electrical energy when network usage is low and release it to be used in the grid during periods of high demand. The ESS operation must be scheduled to be effective and there are several scheduling methods that depend on energy generation data, flexible time-of-use tariffs or closed loop set-points. This thesis proposes a method that uses only historic or forecasted demand data which is also a requirement for other methods. The methodology formulates an electricity demand profile and ESS as a combination of the one-dimensional bin packing problem and the subset sum problem and solves them heuristically with specific modifications and transformations to obtain viable schedules. The schedules may then be optimised further using genetic algorithm optimisation. Comparative analyses with other algorithms and case studies using real-world data are used for verification. The algorithm is shown to be effective and has some advantages when compared to other existing algorithms; hence it can be used in scenarios where other methods are not applicable. On the second topic the thesis explores web-based power systems analysis platforms and shows that most use a web server primarily as an interface for exchanging requests and results between a front-end web browser and specialised back-end computation software written in a general programming language. A web server runs programs written in scripting languages such as PHP, which is the most popular web server programming language. Recent versions of web scripting languages have the computational capabilities required for power systems analysis and can handle the task of modelling networks and analysing them. This provides an opportunity for a slimmer 2-tier framework in which the web server also acts as the computation layer. The requirements for general power systems modelling are discussed and a methodology for realising web-based simulation using PHP programming is developed. Some of the modelling functions are handled natively in PHP and some require the use of extensions. The results show that using PHP for simulations can result in simpler access to power systems analysis functions in websites and web applications. The memory consumed by the PHP library developed is seen to be low and the computation time for reasonably large networks is in the millisecond range

Adaptive runtime techniques for power and resource management on multi-core systems

Energy-related costs are among the major contributors to the total cost of ownership of data centers and high-performance computing (HPC) clusters. As a result, future data centers must be energy-efficient to meet the continuously increasing computational demand. Constraining the power consumption of the servers is a widely used approach for managing energy costs and complying with power delivery limitations. In tandem, virtualization has become a common practice, as virtualization reduces hardware and power requirements by enabling consolidation of multiple applications on to a smaller set of physical resources. However, administration and management of data center resources have become more complex due to the growing number of virtualized servers installed in data centers. Therefore, designing autonomous and adaptive energy efficiency approaches is crucial to achieve sustainable and cost-efficient operation in data centers. Many modern data centers running enterprise workloads successfully implement energy efficiency approaches today. However, the nature of multi-threaded applications, which are becoming more common in all computing domains, brings additional design and management challenges. Tackling these challenges requires a deeper understanding of the interactions between the applications and the underlying hardware nodes. Although cluster-level management techniques bring significant benefits, node-level techniques provide more visibility into application characteristics, which can then be used to further improve the overall energy efficiency of the data centers. This thesis proposes adaptive runtime power and resource management techniques on multi-core systems. It demonstrates that taking the multi-threaded workload characteristics into account during management significantly improves the energy efficiency of the server nodes, which are the basic building blocks of data centers. The key distinguishing features of this work are as follows: We implement the proposed runtime techniques on state-of-the-art commodity multi-core servers and show that their energy efficiency can be significantly improved by (1) taking multi-threaded application specific characteristics into account while making resource allocation decisions, (2) accurately tracking dynamically changing power constraints by using low-overhead application-aware runtime techniques, and (3) coordinating dynamic adaptive decisions at various layers of the computing stack, specifically at system and application levels. Our results show that efficient resource distribution under power constraints yields energy savings of up to 24% compared to existing approaches, along with the ability to meet power constraints 98% of the time for a diverse set of multi-threaded applications

Energy and Performance: Management of Virtual Machines: Provisioning, Placement, and Consolidation

Cloud computing is a new computing paradigm that offers scalable storage and compute resources to users on demand through Internet. Public cloud providers operate large-scale data centers around the world to handle a large number of users request. However, data centers consume an immense amount of electrical energy that can lead to high operating costs and carbon emissions. One of the most common and effective method in order to reduce energy consumption is Dynamic Virtual Machines Consolidation (DVMC) enabled by the virtualization technology. DVMC dynamically consolidates Virtual Machines (VMs) into the minimum number of active servers and then switches the idle servers into a power-saving mode to save energy. However, maintaining the desired level of Quality-of-Service (QoS) between data centers and their users is critical for satisfying users’ expectations concerning performance. Therefore, the main challenge is to minimize the data center energy consumption while maintaining the required QoS. This thesis address this challenge by presenting novel DVMC approaches to reduce the energy consumption of data centers and improve resource utilization under workload independent quality of service constraints. These approaches can be divided into three main categories: heuristic, meta-heuristic and machine learning. Our first contribution is a heuristic algorithm for solving the DVMC problem. The algorithm uses a linear regression-based prediction model to detect over-loaded servers based on the historical utilization data. Then it migrates some VMs from the over-loaded servers to avoid further performance degradations. Moreover, our algorithm consolidates VMs on fewer number of server for energy saving. The second and third contributions are two novel DVMC algorithms based on the Reinforcement Learning (RL) approach. RL is interesting for highly adaptive and autonomous management in dynamic environments. For this reason, we use RL to solve two main sub-problems in VM consolidation. The first sub-problem is the server power mode detection (sleep or active). The second sub-problem is to find an effective solution for server status detection (overloaded or non-overloaded). The fourth contribution of this thesis is an online optimization meta-heuristic algorithm called Ant Colony System-based Placement Optimization (ACS-PO). ACS is a suitable approach for VM consolidation due to the ease of parallelization, that it is close to the optimal solution, and its polynomial worst-case time complexity. The simulation results show that ACS-PO provides substantial improvement over other heuristic algorithms in reducing energy consumption, the number of VM migrations, and performance degradations. Our fifth contribution is a Hierarchical VM management (HiVM) architecture based on a three-tier data center topology which is very common use in data centers. HiVM has the ability to scale across many thousands of servers with energy efficiency. Our sixth contribution is a Utilization Prediction-aware Best Fit Decreasing (UP-BFD) algorithm. UP-BFD can avoid SLA violations and needless migrations by taking into consideration the current and predicted future resource requirements for allocation, consolidation, and placement of VMs. Finally, the seventh and the last contribution is a novel Self-Adaptive Resource Management System (SARMS) in data centers. To achieve scalability, SARMS uses a hierarchical architecture that is partially inspired from HiVM. Moreover, SARMS provides self-adaptive ability for resource management by dynamically adjusting the utilization thresholds for each server in data centers.Siirretty Doriast