BIGRE: a low cross-talk integral field unit tailored for extrasolar planets imaging spectroscopy

Integral field spectroscopy (IFS) represents a powerful technique for the detection and characterization of extrasolar planets through high contrast imaging, since it allows to obtain simultaneously a large number of monochromatic images. These can be used to calibrate and then to reduce the impact of speckles, once their chromatic dependence is taken into account. The main concern in designing integral field spectrographs for high contrast imaging is the impact of the diffraction effects and the non-common path aberrations together with an efficient use of the detector pixels. We focus our attention on integral field spectrographs based on lenslet-arrays, discussing the main features of these designs: the conditions of appropriate spatial and spectral sampling of the resulting spectrograph's slit functions and their related cross-talk terms when the system works at the diffraction limit. We present a new scheme for the integral field unit (IFU) based on a dual-lenslet device (BIGRE), that solves some of the problems related to the classical TIGER design when used for such applications. We show that BIGRE provides much lower cross-talk signals than TIGER, allowing a more efficient use of the detector pixels and a considerable saving of the overall cost of a lenslet-based integral field spectrograph.Comment: 17 pages, 18 figures, accepted for publication in Ap

Fibre segment interferometry using code-division multiplexed optical signal processing for strain sensing applications

A novel optical signal processing scheme for multiplexing fibre segment interferometers is proposed. The continuous-wave, homodyne technique combines code-division multiplexing with single-sideband modulation. It uses only one electro-optic phase modulator to achieve both range separation and quadrature interferometric phase measurement. This scheme is applied to fibre segment interferometry, where a number of long-gauge length interferometric fibre sensors are formed by subtracting pairs of signals from equidistantly placed, weak back reflectors. In this work we give a detailed account of the signal processing involved and, in particular, explore aspects such as electronic bandwidth requirements, noise, crosstalk and linearity, which are important design considerations. A signal bandwidth of ±20 kHz permits the resolution of phase change rates of 2.5 × 104 rad s-1 for each of the four 16.5 m long segments in our setup. We show that dynamic strain resolutions below 0.2 nanostrain Hz-0.5 at 2 m sensor gauge length are achievable, even with an inexpensive diode laser. When used in applications that require only relative strain change measurements, this scheme compares well to more established techniques and can provide high-fidelity yet cost-effective measurements

B0943+10: low-frequency study of subpulse periodicity in the Bright mode with LOFAR

We use broadband sensitive LOFAR observations in the 25-80 MHz frequency range to study the single-pulse emission properties of the mode-switching pulsar B0943+10. We review the derivation of magnetospheric geometry, originally based on low-frequency radio data, and show that the geometry is less constrained than previously thought. This may be used to help explain the large fractional amplitudes of the observed thermal X-ray pulsations from the polar cap, which contradict the almost aligned rotator model of PSR B0943+10. We analyse the properties of drifting subpulses in the Bright mode and report on the minutes-long variations of the drift period. We searched for the periodic amplitude modulation of drifting subpulses, which is a vital argument for constraining several important system parameters: the degree of aliasing, the orientation of the line-of-sight vector with respect to magnetic and spin axes, the angular velocity of the carousel, and thus, the gradient of the accelerating potential in the polar gap. The periodic amplitude modulation was not detected, indicating that it may be a rare or narrow-band phenomenon. Based on our non-detection and review of available literature, we chose to leave the aliasing order unconstrained and derived the number of sparks under different assumptions about the aliasing order and geometry angles. Contrary to the previous findings, we did not find a large (of the order of 10%) gradual variation of the separation between subpulses throughout Bright mode. We speculate that this large variation may be due to the incorrect accounting for the curvature of the line of sight within the on-pulse window. Finally, we report on the frequency-dependent drift phase delay, which is similar to the delay reported previously for PSR B0809+74. We provide a quantitative explanation of the observed frequency-dependent drift phase delay within the carousel model.Comment: updated to match the accepted version (A&A); added polarisation discussion and language correction

Imaging and Nulling with the Space Interferometry Mission

We present numerical simulations for a possible synthesis imaging mode of the Space Interferometer Mission (SIM). We summarize the general techniques that SIM offers to perform imaging of high surface brightness sources, and discuss their strengths and weaknesses. We describe an interactive software package that is used to provide realistic, photometrically correct estimates of SIM performance for various classes of astronomical objects. In particular, we simulate the cases of gaseous disks around black holes in the nuclei of galaxies, and zodiacal dust disks around young stellar objects. Regarding the first, we show that a Keplerian velocity gradient of the line-emitting gaseous disk -- and thus the mass of the putative black hole -- can be determined with SIM to unprecedented accuracy in about 5 hours of integration time for objects with H_alpha surface brigthness comparable to the prototype M 87. Detections and observations of exo-zodiacal dust disks depend critically on the disk properties and the nulling capabilities of SIM. Systems with similar disk size and at least one tenth of the dust content of beta Pic can be detected by SIM at distances between 100 pc and a few kpc, if a nulling efficiency of 1/10000 is achieved. Possible inner clear regions indicative of the presence of massive planets can also be detected and imaged. On the other hand, exo-zodiacal disks with properties more similar to the solar system will not be found in reasonable integration times with SIM.Comment: 28 pages, incl. 8 postscript figures, excl. 10 gif-figures Submitted to Ap

MOST photometry of the roAp star 10 Aql

Context: We present 31.2 days of nearly continuous MOST photometry of the roAp star 10Aql. Aims:The goal was to provide an unambiguous frequency identification for this little studied star, as well as to discuss the detected frequencies in the context of magnetic models and analyze the influence of the magnetic field on the pulsation. Methods: Using traditional Fourier analysis techniques on three independent data reductions, intrinsic frequencies for the star are identified. Theoretical non-adiabatic axisymmetric modes influenced by a magnetic field having polar field strengths Bp = 0-5kG were computed to compare the observations to theory. Results: The high-precision data allow us to identify three definite intrinsic pulsation frequencies and two other candidate frequencies with low S/N. Considering the observed spacings, only one (50.95microHz) is consistent with the main sequence nature of roAp stars. The comparison with theoretical models yields a best fit for a 1.95Msun model having solar metallicity, suppressed envelope convection, and homogenous helium abundance. Furthermore, our analysis confirms the suspected slow rotation of the star and sets new lower limits to the rotation period (Prot>1 month) and inclination (i>30\pm10deg.). Conclusions:The observed frequency spectrum is not rich enough to unambiguously identify a model. On the other hand, the models hardly represent roAp stars in detail due to the approximations needed to describe the interactions of the magnetic field with stellar structure and pulsation. Consequently, errors in the model frequencies needed for the fitting procedure can only be estimated. Nevertheless, it is encouraging that models which suppress convection and include solar metallicity, in agreement with current concepts of roAp stars, fit the observations best.Comment: accepted by A&

Principal Component Analysis of the Time- and Position-Dependent Point Spread Function of the Advanced Camera for Surveys

We describe the time- and position-dependent point spread function (PSF) variation of the Wide Field Channel (WFC) of the Advanced Camera for Surveys (ACS) with the principal component analysis (PCA) technique. The time-dependent change is caused by the temporal variation of the $HST$ focus whereas the position-dependent PSF variation in ACS/WFC at a given focus is mainly the result of changes in aberrations and charge diffusion across the detector, which appear as position-dependent changes in elongation of the astigmatic core and blurring of the PSF, respectively. Using >400 archival images of star cluster fields, we construct a ACS PSF library covering diverse environments of the $HST$ observations (e.g., focus values). We find that interpolation of a small number ($\sim20$) of principal components or ``eigen-PSFs'' per exposure can robustly reproduce the observed variation of the ellipticity and size of the PSF. Our primary interest in this investigation is the application of this PSF library to precision weak-lensing analyses, where accurate knowledge of the instrument's PSF is crucial. However, the high-fidelity of the model judged from the nice agreement with observed PSFs suggests that the model is potentially also useful in other applications such as crowded field stellar photometry, galaxy profile fitting, AGN studies, etc., which similarly demand a fair knowledge of the PSFs at objects' locations. Our PSF models, applicable to any WFC image rectified with the Lanczos3 kernel, are publicly available.Comment: Accepted to PASP. To appear in December issue. Figures are degraded to meet the size limit. High-resolution version can be downloaded at http://acs.pha.jhu.edu/~mkjee/acs_psf/acspsf.pd