A Testing Framework for Discovering Vulnerabilities in 6LoWPAN Networks

International audienceIn this work, we present the process of identifying potential vulnerabilities in 6LoWPAN enabled networks through fuzzing. The 6LowPAN protocol has been designed by the IETF as an adaptation layer of IPv6 for Low power and lossy networks. The fuzzing process is build upon the Scapy packets manipulation library. It provides different mutation algorithms to be applied on 6LoWPAN protocol messages to assess its implementations security and robustness. The protocol behaviors are described using an XML format to define different testing scenarios

A Holistic Analysis of Internet of Things (IoT) Security : Principles, Practices, and New Perspectives

Peer reviewedPublisher PD

Systematically Detecting Packet Validation Vulnerabilities in Embedded Network Stacks

Embedded Network Stacks (ENS) enable low-resource devices to communicate with the outside world, facilitating the development of the Internet of Things and Cyber-Physical Systems. Some defects in ENS are thus high-severity cybersecurity vulnerabilities: they are remotely triggerable and can impact the physical world. While prior research has shed light on the characteristics of defects in many classes of software systems, no study has described the properties of ENS defects nor identified a systematic technique to expose them. The most common automated approach to detecting ENS defects is feedback-driven randomized dynamic analysis ("fuzzing"), a costly and unpredictable technique. This paper provides the first systematic characterization of cybersecurity vulnerabilities in ENS. We analyzed 61 vulnerabilities across 6 open-source ENS. Most of these ENS defects are concentrated in the transport and network layers of the network stack, require reaching different states in the network protocol, and can be triggered by only 1-2 modifications to a single packet. We therefore propose a novel systematic testing framework that focuses on the transport and network layers, uses seeds that cover a network protocol's states, and systematically modifies packet fields. We evaluated this framework on 4 ENS and replicated 12 of the 14 reported IP/TCP/UDP vulnerabilities. On recent versions of these ENSs, it discovered 7 novel defects (6 assigned CVES) during a bounded systematic test that covered all protocol states and made up to 3 modifications per packet. We found defects in 3 of the 4 ENS we tested that had not been found by prior fuzzing research. Our results suggest that fuzzing should be deferred until after systematic testing is employed.Comment: 12 pages, 3 figures, to be published in the 38th IEEE/ACM International Conference on Automated Software Engineering (ASE 2023

Internet of Things for system integrity: a comprehensive survey on security, attacks and countermeasures for industrial applications

The growth of the Internet of Things (IoT) offers numerous opportunities for developing industrial applications such as smart grids, smart cities, smart manufacturers, etc. By utilising these opportunities, businesses engage in creating the Industrial Internet of Things (IIoT). IoT is vulnerable to hacks and, therefore, requires various techniques to achieve the level of security required. Furthermore, the wider implementation of IIoT causes an even greater security risk than its benefits. To provide a roadmap for researchers, this survey discusses the integrity of industrial IoT systems and highlights the existing security approaches for the most significant industrial applications. This paper mainly classifies the attacks and possible security solutions regarding IoT layers architecture. Consequently, each attack is connected to one or more layers of the architecture accompanied by a literature analysis on the various IoT security countermeasures. It further provides a critical analysis of the existing IoT/IIoT solutions based on different security mechanisms, including communications protocols, networking, cryptography and intrusion detection systems. Additionally, there is a discussion of the emerging tools and simulations used for testing and evaluating security mechanisms in IoT applications. Last, this survey outlines several other relevant research issues and challenges for IoT/IIoT security

Intrusion Detection System for detecting internal threats in 6LoWPAN

6LoWPAN (IPv6 over Low-power Wireless Personal Area Network) is a standard developed by the Internet Engineering Task Force group to enable the Wireless Sensor Networks to connect to the IPv6 Internet. This standard is rapidly gaining popularity for its applicability, ranging extensively from health care to environmental monitoring. Security is one of the most crucial issues that need to be considered properly in 6LoWPAN. Common 6LoWPAN security threats can come from external or internal attackers. Cryptographic techniques are helpful in protecting the external attackers from illegally joining the network. However, because the network devices are commonly not tampered-proof, the attackers can break the cryptography codes of such devices and use them to operate like an internal source. These malicious sources can create internal attacks, which may downgrade significantly network performance. Protecting the network from these internal threats has therefore become one of the centre security problems on 6LoWPAN. This thesis investigates the security issues created by the internal threats in 6LoWPAN and proposes the use of Intrusion Detection System (IDS) to deal with such threats. Our main works are to categorise the 6LoWPAN threats into two major types, and to develop two different IDSs to detect each of this type effectively. The major contributions of this thesis are summarised as below. First, we categorise the 6LoWPAN internal threats into two main types, one that focuses on compromising directly the network performance (performance-type) and the other is to manipulate the optimal topology (topology-type), to later downgrade the network service quality indirectly. In each type, we select some typical threats to implement, and assess their particular impacts on network performance as well as identify performance metrics that are sensitive in the attacked situations, in order to form the basis detection knowledge. In addition, on studying the topology-type, we propose several novel attacks towards the Routing Protocol for Low Power and Lossy network (RPL - the underlying routing protocol in 6LoWPAN), including the Rank attack, Local Repair attack and DIS attack. Second, we develop a Bayesian-based IDS to detect the performance-type internal threats by monitoring typical attacking targets such as traffic, channel or neighbour nodes. Unlike other statistical approaches, which have a limited view by just using a single metric to monitor a specific attack, our Bayesian-based IDS can judge an abnormal behaviour with a wiser view by considering of different metrics using the insightful understanding of their relations. Such wiser view helps to increase the IDS’s accuracy significantly. Third, we develop a Specification-based IDS module to detect the topology-type internal threats based on profiling the RPL operation. In detail, we generalise the observed states and transitions of RPL control messages to construct a high-level abstract of node operations through analysing the trace files of the simulations. Our profiling technique can form all of the protocol’s legal states and transitions automatically with corresponding statistic data, which is faster and easier to verify compare with other manual specification techniques. This IDS module can detect the topology-type threats quickly with a low rate of false detection. We also propose a monitoring architecture that uses techniques from modern technologies such as LTE (Long-term Evolution), cloud computing, and multiple interface sensor devices, to expand significantly the capability of the IDS in 6LoWPAN. This architecture can enable the running of both two proposed IDSs without much overhead created, to help the system to deal with most of the typical 6LoWPAN internal threats. Overall, the simulation results in Contiki Cooja prove that our two IDS modules are effective in detecting the 6LoWPAN internal threats, with the detection accuracy is ranging between 86 to 100% depends on the types of attacks, while the False Positive is also satisfactory, with under 5% for most of the attacks. We also show that the additional energy consumptions and the overhead of the solutions are at an acceptable level to be used in the 6LoWPAN environment

Ensuring Cyber-Security in Smart Railway Surveillance with SHIELD

Modern railways feature increasingly complex embedded computing systems for surveillance, that are moving towards fully wireless smart-sensors. Those systems are aimed at monitoring system status from a physical-security viewpoint, in order to detect intrusions and other environmental anomalies. However, the same systems used for physical-security surveillance are vulnerable to cyber-security threats, since they feature distributed hardware and software architectures often interconnected by ‘open networks’, like wireless channels and the Internet. In this paper, we show how the integrated approach to Security, Privacy and Dependability (SPD) in embedded systems provided by the SHIELD framework (developed within the EU funded pSHIELD and nSHIELD research projects) can be applied to railway surveillance systems in order to measure and improve their SPD level. SHIELD implements a layered architecture (node, network, middleware and overlay) and orchestrates SPD mechanisms based on ontology models, appropriate metrics and composability. The results of prototypical application to a real-world demonstrator show the effectiveness of SHIELD and justify its practical applicability in industrial settings

A Practical Wireless Exploitation Framework for Z-Wave Networks

Wireless Sensor Networks (WSN) are a growing subset of the emerging Internet of Things (IoT). WSNs reduce the cost of deployment over wired alternatives; consequently, use is increasing in home automation, critical infrastructure, smart metering, and security solutions. Few published works evaluate the security of proprietary WSN protocols due to the lack of low-cost and effective research tools. One such protocol is ITU-T G.9959-based Z-Wave, which maintains wide acceptance within the IoT market. This research utilizes an open source toolset, presented herein, called EZ-Wave to identify methods for exploiting Z-Wave devices and networks using Software-Defined Radios (SDR). Herein, techniques enabling active network reconnaissance, including network enumeration and device interrogation, are presented. Furthermore, a fuzzing framework is presented and utilized to identify three packet malformations resulting in anomalous device behavior. Finally, a method for classifying the three most common Z-Wave transceivers with \u3e99% accuracy using preamble manipulation is identified and tested

Security Analysis of Internet of Things Devices: Hands-on lab

International audienc