Experimental Benchmarks and Initial Evaluation of the Performance of the PASM System Prototype

The work reported here represents experiences with the PASM parallel processing system prototype during its first operational year. Most of the experiments were performed by students in the Fall semester of 1987. The first programming, and the first timing measurements, were made during the summer of 1987 by Sam Fineberg. The goal of the collection of experiments presented here was to undertake an Application-driven Architecture Study of the PASM system as a paradigm for parallel architecture evaluation in general. PASM was an excellent vehicle for experimenting with this evaluation technique due to its unique architectural features. Among these are: 1. A reconfigurable, partitionable multistage circuit-switched network. 2. Support for both SIMD and MIMD programs. 3. Ability to execute hybrid SIMD/MIMD programs. 4. An instruction queue which allows overlap of control-flow and data manipulation between micro-control (MC) units and processing elements (PE). It had been hypothesized that superlinear speed-up over the number of PEs could be attained with this feature, and experimental results verified this. 5. Support for barrier synchronization of MIMD tasks. This feature was exploited in some non-standard ways to show the ability to decouple variant length SIMD instructions into multiple MIMD streams for an overall performance benefit. This type of study is expected to continue in the future on PASM and other parallel machines at Purdue. This report should serve as a guide for this future work as well

Hardware Barrier Synchronization: Static Barrier MIMD (SBM)

In this paper, we give the design, and performance analysis, of a new, highly efficient, synchronization mechanism called “Static Barrier MIMD” or “SBM.” Unlike traditional barrier synchronization, the proposed barriers are designed to facilitate the use of static (compile-time) code scheduling for eliminating some synchronizations. For this reason, our barrier hardware is more general than most hardware barrier mechanisms, allowing any subset of the processors to participate in each barrier. Since code scheduling typically operates on fine-grain parallelism, it is also vital that barriers be able to execute in a small number of clock ticks. The SBM is actually only one of two new classes of barrier machines proposed to facilitate static code scheduling; the other architecture is the “Dynamic Barrier MIMD,” or “DBM,” which is described in a companion paper1. The DBM differs from the SBM in that the DBM employs more complex hardware to make the system less dependent on the precision of the static analysis and code scheduling; for example, an SBM cannot efficiently manage simultaneous execution of independent parallel programs, whereas a DBM can

Extending Static Synchronization Beyond SIMD and VLIW

A key advantage of SIMD (Single Instruction stream, Multiple Data stream) architectures is that synchronization is effected statically at compile-time, hence the execution-time cost of synchronization between “processes” is essentially zero. VLIW (Very Long Instruction Word) machines are successful in large part because they preserve this property while providing more flexibility in terms of what kinds of operations can be parallelized. In this paper, we propose a new kind of architecture —- the “static barrier MIMD” or SBM — which can be viewed as a further generalization of the parallel execution abilities of static synchronization machines. Barrier MIMDs are asynchronous Multiple Instruction stream Multiple Data stream architectures capable of parallel execution of loops, subprogram calls, and variable execution- time instructions; however, little or no run-time synchronization is needed. When a group of processors within a barrier MIMD has just encountered a barrier, any conceptual synchronizations between the processors are statically accomplished with zero cost — as in a SIMD or VLIW and using similar compiler technology. Unlike these machines, however, as execution continues the relative timing of processors may become less precisely knowable as a static, compile-time, quantity. Where this imprecision becomes too large, the compiler simply inserts a synchronization barrier to insure that timing imprecision at that point is zero, and again employs purely static, implicit, synchronization. Both the architecture and the supporting compiler technology are discussed in detail

The PARSE Programming Paradigm. Part I: Software Development Methodology. Part II: Software Development Support Tools

The programming methodology of PARSE (parallel software environment), a software environment being developed for reconfigurable non-shared memory parallel computers, is described. This environment will consist of an integrated collection of language interfaces, automatic and semi-automatic debugging and analysis tools, and operating system —all of which are made more flexible by the use of a knowledge-based implementation for the tools that make up PARSE. The programming paradigm supports the user freely choosing among three basic approaches /abstractions for programming a parallel machine: logic-based descriptive, sequential-control procedural, and parallel-control procedural programming. All of these result in efficient parallel execution. The current work discusses the methodology underlying PARSE, whereas the companion paper, “The PARSE Programming Paradigm — II: Software Development Support Tools,” details each of the component tools

Studies of inspection algorithms and associated microprogrammable hardware implementations

This work is concerned with the design and development of real-time algorithms for industrial inspection applications. Rather than implement algorithms in dedicated hardware, microprogrammable machines were considered essential in order to maintain flexibility. After a survey of image pattern recognition where algorithms applicable to real-time use are cited, this thesis presents industrial inspection algorithms that locate and scrutinise actual manufactured products. These are fast and robust - a necessary requirement in industrial environments. The National Physical Laboratory have developed a Linear Array Processor (LAP) specifically designed for industrial recognition work. As with most array processors, the LAP has a greater performance than conventional processors, yet is strictly limited to parallel algorithms for optimum performance. It was therefore necessary to incorporate sequentialism into the design of a multiprocessor system. A microcoded bit-slice Sequential Image Processor (SIP) has been designed and built at RHBNC in conjunction with the NPL. This was primarily intended as a post-processor for the LAP based on the VMEbus but in fact has proved its usefulness as a stand-alone processor. This is described along with an assembler written for SIP which translates assembly language mnemonics to microcode. This work, which includes a review of current architectures, leads to the specification of a hybrid (SIMD/NIMD) architecture consisting of multiple autonomous sequential processors. This involves an analysis of various configurations and entails an investigation of the source of bottlenecks within each design. Such systems require a significant amount of interprocessor communication: methods for achieving this are discussed, some of which have only become practical with the decrease incost of electronic components. This eventually leads to a system for which algorithm execution speed increases approximately linearly with the number of processors. The algorithms described in earlier chapters are examined on the system and the practicalities of such a design are analysed in detail. Overall, this thesis has arrived at designs of programmable real-time inspection systems, and has obtained guidelines which will help with the implementation of future inspection systems.<p

Probabilistic structural mechanics research for parallel processing computers

Aerospace structures and spacecraft are a complex assemblage of structural components that are subjected to a variety of complex, cyclic, and transient loading conditions. Significant modeling uncertainties are present in these structures, in addition to the inherent randomness of material properties and loads. To properly account for these uncertainties in evaluating and assessing the reliability of these components and structures, probabilistic structural mechanics (PSM) procedures must be used. Much research has focused on basic theory development and the development of approximate analytic solution methods in random vibrations and structural reliability. Practical application of PSM methods was hampered by their computationally intense nature. Solution of PSM problems requires repeated analyses of structures that are often large, and exhibit nonlinear and/or dynamic response behavior. These methods are all inherently parallel and ideally suited to implementation on parallel processing computers. New hardware architectures and innovative control software and solution methodologies are needed to make solution of large scale PSM problems practical

Master-Slave Control structure for massively parallel System on Chip

16th Euromicro Conference on Digital System DesignInternational audienceThe performance of massively parallel processing system depends mostly on the control configuration that is inherently part of the system. In particular, centralized control configuration is rigid and limits system scalability, and distributed control configuration is difficult to control in processing elements (PEs) interaction. Maintaining a flexible autonomous computation coupled with regular synchronous communication can assure a efficient parallel processing. The master-slave control structure is specified in such a way that previous features of the massively parallel System-on-Chip (mpSoC) are preserved and performance is improved. In this paper, we define the prototyping of a master-slave control structure for mpSoC in a FPGA-based platform. The structure implementation and related experiments using the vhdl language running on virtex6 ml605 of Xilinx board are described

Three Highly Parallel Computer Architectures and Their Suitability for Three Representative Artificial Intelligence Problems

Virtually all current Artificial Intelligence (AI) applications are designed to run on sequential (von Neumann) computer architectures. As a result, current systems do not scale up. As knowledge is added to these systems, a point is reached where their performance quickly degrades. The performance of a von Neumann machine is limited by the bandwidth between memory and processor (the von Neumann bottleneck). The bottleneck is avoided by distributing the processing power across the memory of the computer. In this scheme the memory becomes the processor (a smart memory ). This paper highlights the relationship between three representative AI application domains, namely knowledge representation, rule-based expert systems, and vision, and their parallel hardware realizations. Three machines, covering a wide range of fundamental properties of parallel processors, namely module granularity, concurrency control, and communication geometry, are reviewed: the Connection Machine (a fine-grained SIMD hypercube), DADO (a medium-grained MIMD/SIMD/MSIMD tree-machine), and the Butterfly (a coarse-grained MIMD Butterflyswitch machine)