Low-complexity dominance-based Sphere Decoder for MIMO Systems

The sphere decoder (SD) is an attractive low-complexity alternative to maximum likelihood (ML) detection in a variety of communication systems. It is also employed in multiple-input multiple-output (MIMO) systems where the computational complexity of the optimum detector grows exponentially with the number of transmit antennas. We propose an enhanced version of the SD based on an additional cost function derived from conditions on worst case interference, that we call dominance conditions. The proposed detector, the king sphere decoder (KSD), has a computational complexity that results to be not larger than the complexity of the sphere decoder and numerical simulations show that the complexity reduction is usually quite significant

Energy-efficient hardware implementation of LR-aided K-Best MIMO decoder for 5G networks

Energy efficiency is a primary design goal for future green wireless communication technologies. Multiple-input multiple-output (MIMO) schemes have been proposed in literature to improve the throughput of communication systems, they are expected to play a prominent role in the upcoming 5th generation (5G) standard. This paper presents a novel high efficiency MIMO decoder based on the K-Best algorithm with lattice reduction. We have designed a novel hardware architecture for this decoder, which was implemented using 32nm standard CMOS technology. Our results show that the proposed decoder can achieve on average a four-fold reduction in the power costs compared to recently published designs for 5G networks. The throughput of the design is 506 Mbits/sec, which is comparable to existing designs

LOW-COMPLEXITY AND HIGH-PERFORMANCE SOFT MIMO DETECTION BASED ON DISTRIBUTED M-ALGORITHM THROUGH TRELLIS-DIAGRAM

This paper presents a novel low-complexity multiple-input multipleoutput (MIMO) detection scheme using a distributed M-algorithm (DM) to achieve high performance soft MIMO detection. To reduce the searching complexity, we build a MIMO trellis graph and split the searching operations among different nodes, where each node will apply the M-algorithm. Instead of keeping a global candidate list as the traditional detector does, this algorithm keeps multiple small candidate lists to generate soft information. Since the DM algorithm can achieve good BER performance with a small M, the sorting cost of the DM algorithm is lower than that of the conventional K-best MIMO algorithm. The proposed algorithm is very suitable for high speed parallel processing.NokiaNokia Siemens Networks (NSN)XilinxNational Science Foundatio

High-Throughput Soft-Output MIMO Detector Based on Path-Preserving Trellis-Search Algorithm

In this paper, we propose a novel path-preserving trellis-search (PPTS) algorithm and its high-speed VLSI architecture for soft-output multiple-input-multiple-output (MIMO) detection. We represent the search space of the MIMO signal with an unconstrained trellis, where each node in stage of the trellis maps to a possible complex-valued symbol transmitted by antenna. Based on the trellis model, we convert the soft-output MIMO detection problem into a multiple shortest paths problem subject to the constraint that every trellis node must be covered in this set of paths. The PPTS detector is guaranteed to have soft information for every possible symbol transmitted on every antenna so that the log-likelihood ratio (LLR) for each transmitted data bit can be more accurately formed. Simulation results show that the PPTS algorithm can achieve near-optimal error performance with a low search complexity. The PPTS algorithm is a hardware-friendly data-parallel algorithm because the search operations are evenly distributed among multiple trellis nodes for parallel processing. As a case study, we have designed and synthesized a fully-parallel systolic-array detector and two folded detectors for a 4x4 16-QAM system using a 1.08 V TSMC 65-nm CMOS technology.With a 1.18 mm2 core area, the folded detector can achieve a throughput of 2.1 Gbps.With a 3.19 mm2 core area, the fully-parallel systolic-array detector can achieve a throughput of 6.4 Gbps

Efficient DSP and Circuit Architectures for Massive MIMO: State-of-the-Art and Future Directions

Massive MIMO is a compelling wireless access concept that relies on the use of an excess number of base-station antennas, relative to the number of active terminals. This technology is a main component of 5G New Radio (NR) and addresses all important requirements of future wireless standards: a great capacity increase, the support of many simultaneous users, and improvement in energy efficiency. Massive MIMO requires the simultaneous processing of signals from many antenna chains, and computational operations on large matrices. The complexity of the digital processing has been viewed as a fundamental obstacle to the feasibility of Massive MIMO in the past. Recent advances on system-algorithm-hardware co-design have led to extremely energy-efficient implementations. These exploit opportunities in deeply-scaled silicon technologies and perform partly distributed processing to cope with the bottlenecks encountered in the interconnection of many signals. For example, prototype ASIC implementations have demonstrated zero-forcing precoding in real time at a 55 mW power consumption (20 MHz bandwidth, 128 antennas, multiplexing of 8 terminals). Coarse and even error-prone digital processing in the antenna paths permits a reduction of consumption with a factor of 2 to 5. This article summarizes the fundamental technical contributions to efficient digital signal processing for Massive MIMO. The opportunities and constraints on operating on low-complexity RF and analog hardware chains are clarified. It illustrates how terminals can benefit from improved energy efficiency. The status of technology and real-life prototypes discussed. Open challenges and directions for future research are suggested.Comment: submitted to IEEE transactions on signal processin

Energy Efficient VLSI Circuits for MIMO-WLAN

Mobile communication - anytime, anywhere access to data and communication services - has been continuously increasing since the operation of the first wireless communication link by Guglielmo Marconi. The demand for higher data rates, despite the limited bandwidth, led to the development of multiple-input multiple-output (MIMO) communication which is often combined with orthogonal frequency division multiplexing (OFDM). Together, these two techniques achieve a high bandwidth efficiency. Unfortunately, techniques such as MIMO-OFDM significantly increase the signal processing complexity of transceivers. While fast improvements in the integrated circuit (IC) technology enabled to implement more signal processing complexity per chip, large efforts had and have to be done for novel algorithms as well as for efficient very large scaled integration (VLSI) architectures in order to meet today's and tomorrow's requirements for mobile wireless communication systems. In this thesis, we will present architectures and VLSI implementations of complete physical (PHY) layer application specific integrated circuits (ASICs) under the constraints imposed by an industrial wireless communication standard. Contrary to many other publications, we do not elaborate individual components of a MIMO-OFDM communication system stand-alone, but in the context of the complete PHY layer ASIC. We will investigate the performance of several MIMO detectors and the corresponding preprocessing circuits, being integrated into the entire PHY layer ASIC, in terms of achievable error-rate, power consumption, and area requirement. Finally, we will assemble the results from the proposed PHY layer implementations in order to enhance the energy efficiency of a transceiver. To this end, we propose a cross-layer optimization of PHY layer and medium access control (MAC) layer