Low Leakage and Robust Sub-threshold SRAM Cell using Memristor

This work aims to improve the total power dissipation, leakage currents and stability without disturbing the logic state of SRAM cell with concept called sub-threshold operation. Though, sub-threshold SRAM proves to be advantageous but fails with basic 6T SRAM cell during readability and writability. In this paper we have investigated a non-volatile 6T2M (6 Transistors & 2 Memristors) sub-threshold SRAM cell working at lower supply voltage of VDD=0.3V, where Memristor is used to store the information even at power failures and restores previous data with successful read and write operation overcomes the challenge faced. This paper also proposes a new configuration of non-volatile 6T2M (6 Transistors & 2 Memristors) sub-threshold SRAM cell resulting in improved behaviour in terms of power, stability and leakage current where read and write power has improved by 40% and 90% respectively when compared to 6T2M (conventional) SRAM cell. The proposed 6T2M SRAM cell offers good stability of RSNM=65mV and WSNM=93mV which is much improved at low voltage when compared to conventional basic 6T SRAM cell, and improved leakage current of 4.92nA is achieved as compared

Digital and analog TFET circuits: Design and benchmark

In this work, we investigate by means of simulations the performance of basic digital, analog, and mixed-signal circuits employing tunnel-FETs (TFETs). The analysis reviews and complements our previous papers on these topics. By considering the same devices for all the analysis, we are able to draw consistent conclusions for a wide variety of circuits. A virtual complementary TFET technology consisting of III-V heterojunction nanowires is considered. Technology Computer Aided Design (TCAD) models are calibrated against the results of advanced full-quantum simulation tools and then used to generate look-up-tables suited for circuit simulations. The virtual complementary TFET technology is benchmarked against predictive technology models (PTM) of complementary silicon FinFETs for the 10 nm node over a wide range of supply voltages (VDD) in the sub-threshold voltage domain considering the same footprint between the vertical TFETs and the lateral FinFETs and the same static power. In spite of the asymmetry between p- and n-type transistors, the results show clear advantages of TFET technology over FinFET for VDDlower than 0.4 V. Moreover, we highlight how differences in the I-V characteristics of FinFETs and TFETs suggest to adapt the circuit topologies used to implement basic digital and analog blocks with respect to the most common CMOS solutions

Ultra Low Power Digital Circuit Design for Wireless Sensor Network Applications

Ny forskning innenfor feltet trådløse sensornettverk åpner for nye og innovative produkter og løsninger. Biomedisinske anvendelser er blant områdene med størst potensial og det investeres i dag betydelige beløp for å bruke denne teknologien for å gjøre medisinsk diagnostikk mer effektiv samtidig som man åpner for fjerndiagnostikk basert på trådløse sensornoder integrert i et ”helsenett”. Målet er å forbedre tjenestekvalitet og redusere kostnader samtidig som brukerne skal oppleve forbedret livskvalitet som følge av økt trygghet og mulighet for å tilbringe mest mulig tid i eget hjem og unngå unødvendige sykehusbesøk og innleggelser. For å gjøre dette til en realitet er man avhengige av sensorelektronikk som bruker minst mulig energi slik at man oppnår tilstrekkelig batterilevetid selv med veldig små batterier. I sin avhandling ” Ultra Low power Digital Circuit Design for Wireless Sensor Network Applications” har PhD-kandidat Farshad Moradi fokusert på nye løsninger innenfor konstruksjon av energigjerrig digital kretselektronikk. Avhandlingen presenterer nye løsninger både innenfor aritmetiske og kombinatoriske kretser, samtidig som den studerer nye statiske minneelementer (SRAM) og alternative minnearkitekturer. Den ser også på utfordringene som oppstår når silisiumteknologien nedskaleres i takt med mikroprosessorutviklingen og foreslår løsninger som bidrar til å gjøre kretsløsninger mer robuste og skalerbare i forhold til denne utviklingen. De viktigste konklusjonene av arbeidet er at man ved å introdusere nye konstruksjonsteknikker både er i stand til å redusere energiforbruket samtidig som robusthet og teknologiskalerbarhet øker. Forskningen har vært utført i samarbeid med Purdue University og vært finansiert av Norges Forskningsråd gjennom FRINATprosjektet ”Micropower Sensor Interface in Nanometer CMOS Technology”

Supply Voltage Dependence of Heavy Ion Induced SEEs on 65nm CMOS Bulk SRAMs

The power consumption of Static Random Access Memory (SRAM) has become an important issue for modern integrated circuit design, considering the fact that they occupy large area and consume significant portion of power consumption in modern nanometer chips. SRAM operating in low power supply voltages has become an effective approach in reducing power consumption. Therefore, it is essential to experimentally characterize the single event effects (SEE) of hardened and unhardened SRAM cells to determine their appropriate applications, especially when a low supply voltage is preferred. In this thesis, a SRAM test chip was designed and fabricated with four cell arrays sharing the same peripheral circuits, including two types of unhardened cells (standard 6T and sub-threshold 10T) and two types of hardened cells (Quatro and DICE). The systems for functional and radiation tests were built up with power supply voltages that ranged from near threshold 0.4 V to normal supply 1 V. The test chip was irradiated with alpha particles and heavy ions with various linear energy transfers (LETs) at different core supply voltages, ranging from 1 V to 0.4 V. Experimental results of the alpha test and heavy ion test were consistent with the results of the simulation. The cross sections of 6T and 10T cells present much more significant sensitivities than Quatro and DICE cells for all tested supply voltages and LET. The 10T cell demonstrates a more optimal radiation performance than the 6T cell when LET is small (0.44 MeV·cm2/mg), yet no significant advantage is evident when LET is larger than this. In regards to the Quatro and DICE cells, one does not consistently show superior performance over the other in terms of soft error rates (SERs). Multi-bit upsets (MBUs) occupy a larger portion of total SEUs in DICE cell when relatively larger LET and smaller supply voltage are applied. It explains the loss in radiation tolerance competition with Quatro cell when LET is bigger than 9.1 MeV·cm2/mg and supply voltage is smaller than 0.6 V. In addition, the analysis of test results also demonstrated that the error amount distributions follow a Poisson distribution very well for each type of cell array

Performance analysis of 22NM FinFET-based 8T SRAM cell

As CMOS devices are approaching nanometer regime, there are a lot of consequences found in scaling down CMOS devices such as short channel effects and process variations which affect the reliability and performance of the devices. Researchers have found that FinFET is one of the outstanding nominee to overcome this issue since FinFET has better control over the channel and the lower overall capacitance which will increase the performance of the 6T Static Random Access Memory (SRAM) circuit design. It will help in reducing bitline loading and hence improve SRAM performance. The conventional 6T SRAM cell suffers serious stability degradation issue due to access disturbance at low power mode. The major problem in 6T SRAM is that, when the output voltage reduced below the threshold voltage of the transistor, it will destroy the read operation of the 6T SRAM cell. The noises are easy to destruct the stored-data in the nodes of the 6T SRAM cell due to the direct path between storage nodes and bit lines. To overcome this issue, an 8T SRAM cell has been proposed where the read stability is expected to improve. The purpose of this study is to simulate and evaluate the performance of FinFET-based 6T SRAM and 8T SRAM cell and compare their results. In 8T SRAM, the two additional access transistors eliminate the discharging path from RBL to ground in 6T SRAM cell which in turn help in improving the stability of read operation in 8T SRAM. The stability of SRAM cell is determined by the butterfly curve which is obtained by combining the voltage transfer curve (VTC) of the two cross-coupled inverters of the SRAM cell. GTS Framework TCAD tool is used to design and simulate the FinFET device structure, the schematic and the layout of SRAM cell. From the findings, the FinFET gives better Vth, DIBL, SS and ION than MOSFET. In addition, 6T and 8T FinFET-based SRAM cell have shown a better stability than 6T and 8T MOSFET-based SRAM cell in retention mode, read mode and write mode. Compared to FinFET-based 6T SRAM cell, FinFET-based 8T SRAM cell improved the read stability by 68.5% and not causing any degradation on the write and retention noise margin