Visual Servoing in Robotics

Visual servoing is a well-known approach to guide robots using visual information. Image processing, robotics, and control theory are combined in order to control the motion of a robot depending on the visual information extracted from the images captured by one or several cameras. With respect to vision issues, a number of issues are currently being addressed by ongoing research, such as the use of different types of image features (or different types of cameras such as RGBD cameras), image processing at high velocity, and convergence properties. As shown in this book, the use of new control schemes allows the system to behave more robustly, efficiently, or compliantly, with fewer delays. Related issues such as optimal and robust approaches, direct control, path tracking, or sensor fusion are also addressed. Additionally, we can currently find visual servoing systems being applied in a number of different domains. This book considers various aspects of visual servoing systems, such as the design of new strategies for their application to parallel robots, mobile manipulators, teleoperation, and the application of this type of control system in new areas

Robot Visual Servoing Using Discontinuous Control

This work presents different proposals to deal with common problems in robot visual servoing based on the application of discontinuous control methods. The feasibility and effectiveness of the proposed approaches are substantiated by simulation results and real experiments using a 6R industrial manipulator. The main contributions are: - Geometric invariance using sliding mode control (Chapter 3): the defined higher-order invariance is used by the proposed approaches to tackle problems in visual servoing. Proofs of invariance condition are presented. - Fulfillment of constraints in visual servoing (Chapter 4): the proposal uses sliding mode methods to satisfy mechanical and visual constraints in visual servoing, while a secondary task is considered to properly track the target object. The main advantages of the proposed approach are: low computational cost, robustness and fully utilization of the allowed space for the constraints. - Robust auto tool change for industrial robots using visual servoing (Chapter 4): visual servoing and the proposed method for constraints fulfillment are applied to an automated solution for tool changing in industrial robots. The robustness of the proposed method is due to the control law of the visual servoing, which uses the information acquired by the vision system to close a feedback control loop. Furthermore, sliding mode control is simultaneously used in a prioritized level to satisfy the aforementioned constraints. Thus, the global control accurately places the tool in the warehouse, but satisfying the robot constraints. - Sliding mode controller for reference tracking (Chapter 5): an approach based on sliding mode control is proposed for reference tracking in robot visual servoing using industrial robot manipulators. The novelty of the proposal is the introduction of a sliding mode controller that uses a high-order discontinuous control signal, i.e., joint accelerations or joint jerks, in order to obtain a smoother behavior and ensure the robot system stability, which is demonstrated with a theoretical proof. - PWM and PFM for visual servoing in fully decoupled approaches (Chapter 6): discontinuous control based on pulse width and pulse frequency modulation is proposed for fully decoupled position based visual servoing approaches, in order to get the same convergence time for camera translation and rotation. Moreover, other results obtained in visual servoing applications are also described.Este trabajo presenta diferentes propuestas para tratar problemas habituales en el control de robots por realimentación visual, basadas en la aplicación de métodos de control discontinuos. La viabilidad y eficacia de las propuestas se fundamenta con resultados en simulación y con experimentos reales utilizando un robot manipulador industrial 6R. Las principales contribuciones son: - Invariancia geométrica utilizando control en modo deslizante (Capítulo 3): la invariancia de alto orden definida aquí es utilizada después por los métodos propuestos, para tratar problemas en control por realimentación visual. Se apuertan pruebas teóricas de la condición de invariancia. - Cumplimiento de restricciones en control por realimentación visual (Capítulo 4): esta propuesta utiliza métodos de control en modo deslizante para satisfacer restricciones mecánicas y visuales en control por realimentación visual, mientras una tarea secundaria se encarga del seguimiento del objeto. Las principales ventajas de la propuesta son: bajo coste computacional, robustez y plena utilización del espacio disponible para las restricciones. - Cambio de herramienta robusto para un robot industrial mediante control por realimentación visual (Capítulo 4): el control por realimentación visual y el método propuesto para el cumplimiento de las restricciones se aplican a una solución automatizada para el cambio de herramienta en robots industriales. La robustez de la propuesta radica en el uso del control por realimentación visual, que utiliza información del sistema de visión para cerrar el lazo de control. Además, el control en modo deslizante se utiliza simultáneamente en un nivel de prioridad superior para satisfacer las restricciones. Así pues, el control es capaz de dejar la herramienta en el intercambiador de herramientas de forma precisa, a la par que satisface las restricciones del robot. - Controlador en modo deslizante para seguimiento de referencia (Capítulo 5): se propone un enfoque basado en el control en modo deslizante para seguimiento de referencia en robots manipuladores industriales controlados por realimentación visual. La novedad de la propuesta radica en la introducción de un controlador en modo deslizante que utiliza la señal de control discontinua de alto orden, i.e. aceleraciones o jerks de las articulaciones, para obtener un comportamiento más suave y asegurar la estabilidad del sistema robótico, lo que se demuestra con una prueba teórica. - Control por realimentación visual mediante PWM y PFM en métodos completamente desacoplados (Capítulo 6): se propone un control discontinuo basado en modulación del ancho y frecuencia del pulso para métodos completamente desacoplados de control por realimentación visual basados en posición, con el objetivo de conseguir el mismo tiempo de convergencia para los movimientos de rotación y traslación de la cámara . Además, se presentan también otros resultados obtenidos en aplicaciones de control por realimentación visual.Aquest treball presenta diferents propostes per a tractar problemes habituals en el control de robots per realimentació visual, basades en l'aplicació de mètodes de control discontinus. La viabilitat i eficàcia de les propostes es fonamenta amb resultats en simulació i amb experiments reals utilitzant un robot manipulador industrial 6R. Les principals contribucions són: - Invariància geomètrica utilitzant control en mode lliscant (Capítol 3): la invariància d'alt ordre definida ací és utilitzada després pels mètodes proposats, per a tractar problemes en control per realimentació visual. S'aporten proves teòriques de la condició d'invariància. - Compliment de restriccions en control per realimentació visual (Capítol 4): aquesta proposta utilitza mètodes de control en mode lliscant per a satisfer restriccions mecàniques i visuals en control per realimentació visual, mentre una tasca secundària s'encarrega del seguiment de l'objecte. Els principals avantatges de la proposta són: baix cost computacional, robustesa i plena utilització de l'espai disponible per a les restriccions. - Canvi de ferramenta robust per a un robot industrial mitjançant control per realimentació visual (Capítol 4): el control per realimentació visual i el mètode proposat per al compliment de les restriccions s'apliquen a una solució automatitzada per al canvi de ferramenta en robots industrials. La robustesa de la proposta radica en l'ús del control per realimentació visual, que utilitza informació del sistema de visió per a tancar el llaç de control. A més, el control en mode lliscant s'utilitza simultàniament en un nivell de prioritat superior per a satisfer les restriccions. Així doncs, el control és capaç de deixar la ferramenta en l'intercanviador de ferramentes de forma precisa, a la vegada que satisfà les restriccions del robot. - Controlador en mode lliscant per a seguiment de referència (Capítol 5): es proposa un enfocament basat en el control en mode lliscant per a seguiment de referència en robots manipuladors industrials controlats per realimentació visual. La novetat de la proposta radica en la introducció d'un controlador en mode lliscant que utilitza senyal de control discontínua d'alt ordre, i.e. acceleracions o jerks de les articulacions, per a obtindre un comportament més suau i assegurar l'estabilitat del sistema robòtic, la qual cosa es demostra amb una prova teòrica. - Control per realimentació visual mitjançant PWM i PFM en mètodes completament desacoblats (Capítol 6): es proposa un control discontinu basat en modulació de l'ample i la freqüència del pols per a mètodes completament desacoblats de control per realimentació visual basats en posició, amb l'objectiu d'aconseguir el mateix temps de convergència per als moviments de rotació i translació de la càmera. A més, es presenten també altres resultats obtinguts en aplicacions de control per realimentació visual.Muñoz Benavent, P. (2017). Robot Visual Servoing Using Discontinuous Control [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/90430TESI

Visual Servoing

The goal of this book is to introduce the visional application by excellent researchers in the world currently and offer the knowledge that can also be applied to another field widely. This book collects the main studies about machine vision currently in the world, and has a powerful persuasion in the applications employed in the machine vision. The contents, which demonstrate that the machine vision theory, are realized in different field. For the beginner, it is easy to understand the development in the vision servoing. For engineer, professor and researcher, they can study and learn the chapters, and then employ another application method

Design and Development of Robotic Part Assembly System under Vision Guidance

Robots are widely used for part assembly across manufacturing industries to attain high productivity through automation. The automated mechanical part assembly system contributes a major share in production process. An appropriate vision guided robotic assembly system further minimizes the lead time and improve quality of the end product by suitable object detection methods and robot control strategies. An approach is made for the development of robotic part assembly system with the aid of industrial vision system. This approach is accomplished mainly in three phases. The first phase of research is mainly focused on feature extraction and object detection techniques. A hybrid edge detection method is developed by combining both fuzzy inference rule and wavelet transformation. The performance of this edge detector is quantitatively analysed and compared with widely used edge detectors like Canny, Sobel, Prewitt, mathematical morphology based, Robert, Laplacian of Gaussian and wavelet transformation based. A comparative study is performed for choosing a suitable corner detection method. The corner detection technique used in the study are curvature scale space, Wang-Brady and Harris method. The successful implementation of vision guided robotic system is dependent on the system configuration like eye-in-hand or eye-to-hand. In this configuration, there may be a case that the captured images of the parts is corrupted by geometric transformation such as scaling, rotation, translation and blurring due to camera or robot motion. Considering such issue, an image reconstruction method is proposed by using orthogonal Zernike moment invariants. The suggested method uses a selection process of moment order to reconstruct the affected image. This enables the object detection method efficient. In the second phase, the proposed system is developed by integrating the vision system and robot system. The proposed feature extraction and object detection methods are tested and found efficient for the purpose. In the third stage, robot navigation based on visual feedback are proposed. In the control scheme, general moment invariants, Legendre moment and Zernike moment invariants are used. The selection of best combination of visual features are performed by measuring the hamming distance between all possible combinations of visual features. This results in finding the best combination that makes the image based visual servoing control efficient. An indirect method is employed in determining the moment invariants for Legendre moment and Zernike moment. These moments are used as they are robust to noise. The control laws, based on these three global feature of image, perform efficiently to navigate the robot in the desire environment

Aerospace medicine and biology: A continuing bibliography with indexes (supplement 344)

This bibliography lists 125 reports, articles and other documents introduced into the NASA Scientific and Technical Information System during January, 1989. Subject coverage includes: aerospace medicine and psychology, life support systems and controlled environments, safety equipment, exobiology and extraterrestrial life, and flight crew behavior and performance

Industrial Robotics

This book covers a wide range of topics relating to advanced industrial robotics, sensors and automation technologies. Although being highly technical and complex in nature, the papers presented in this book represent some of the latest cutting edge technologies and advancements in industrial robotics technology. This book covers topics such as networking, properties of manipulators, forward and inverse robot arm kinematics, motion path-planning, machine vision and many other practical topics too numerous to list here. The authors and editor of this book wish to inspire people, especially young ones, to get involved with robotic and mechatronic engineering technology and to develop new and exciting practical applications, perhaps using the ideas and concepts presented herein

Proceedings of the NASA Conference on Space Telerobotics, volume 3

The theme of the Conference was man-machine collaboration in space. The Conference provided a forum for researchers and engineers to exchange ideas on the research and development required for application of telerobotics technology to the space systems planned for the 1990s and beyond. The Conference: (1) provided a view of current NASA telerobotic research and development; (2) stimulated technical exchange on man-machine systems, manipulator control, machine sensing, machine intelligence, concurrent computation, and system architectures; and (3) identified important unsolved problems of current interest which can be dealt with by future research

Aerial Robotics for Inspection and Maintenance

Aerial robots with perception, navigation, and manipulation capabilities are extending the range of applications of drones, allowing the integration of different sensor devices and robotic manipulators to perform inspection and maintenance operations on infrastructures such as power lines, bridges, viaducts, or walls, involving typically physical interactions on flight. New research and technological challenges arise from applications demanding the benefits of aerial robots, particularly in outdoor environments. This book collects eleven papers from different research groups from Spain, Croatia, Italy, Japan, the USA, the Netherlands, and Denmark, focused on the design, development, and experimental validation of methods and technologies for inspection and maintenance using aerial robots