Enhancing the employability of fashion students through the use of 3D CAD

The textile and apparel industry has one of the longest and most intricate supply chains within manufacturing. Advancement in technology has facilitated its globalisation, enabling companies to span geographical borders. This has led to new methods of communication using electronic data formats. Throughout the latter part of the 20th Century, 2D CAD technology established itself as an invaluable tool within design and product development. More recently 3D virtual simulation software has made small but significant steps within this market. The technological revolution has opened significant opportunities for those forward thinking companies that are beginning to utilise 3D software. This advanced technology requires designers with unique skill sets. This paper investigates the skills required by fashion graduates from an industry perspective. To reflect current industrial working practices, it is essential for educational establishments to incorporate technologies that will enhance the employability of graduates. This study developed an adapted action research model based on the work of Kurt Lewin, which reviewed the learning and teaching of 3D CAD within higher education. It encompassed the selection of 3D CAD software development, analysis of industry requirements, and the implementation of 3D CAD into the learning and teaching of a selection of fashion students over a three year period. Six interviews were undertaken with industrial design and product development specialists to determine: current working practices, opinions of virtual 3D software and graduate skill requirements. It was found that the companies had similar working practices independent of the software utilised within their product development process. The companies which employed 3D CAD software considered further developments were required before the technology could be fully integrated. Further to this it was concluded that it was beneficial for graduates to be furnished with knowledge of emerging technologies which reflect industry and enhance their employability skills

Low carbon housing: lessons from Elm Tree Mews

This report sets out the findings from a low carbon housing trial at Elm Tree Mews, York, and discusses the technical and policy issues that arise from it. The Government has set an ambitious target for all new housing to be zero carbon by 2016. With the application of good insulation, improved efficiencies and renewable energy, this is theoretically possible. However, there is growing concern that, in practice, even existing carbon standards are not being achieved and that this performance gap has the potential to undermine zero carbon housing policy. The report seeks to address these concerns through the detailed evaluation of a low carbon development at Elm Tree Mews. The report: * evaluates the energy/carbon performance of the dwellings prior to occupation and in use; * analyses the procurement, design and construction processes that give rise to the performance achieved; * explores the resident experience; * draws out lessons for the development of zero carbon housing and the implications for government policy; and * proposes a programme for change, designed to close the performance gap

Interrogating the technical, economic and cultural challenges of delivering the PassivHaus standard in the UK.

A peer-reviewed eBook, which is based on a collaborative research project coordinated by Dr. Henrik Schoenefeldt at the Centre for Architecture and Sustainable Environment at the University of Kent between May 2013 and June 2014. This project investigated how architectural practice and the building industry are adapting in order to successfully deliver Passivhaus standard buildings in the UK. Through detailed case studies the project explored the learning process underlying the delivery of fourteen buildings, certified between 2009 and 2013. Largely founded on the study of the original project correspondence and semi-structured interviews with clients, architects, town planners, contractors and manufacturers, these case studies have illuminated the more immediate technical as well as the broader cultural challenges. The peer-reviewers of this book stressed that the findings included in the book are valuable to students, practitioners and academic researchers in the field of low-energy design. It was launched during the PassivHaus Project Conference, held at the Bulb Innovation Centre on the 27th June 2014

Evaluating the impact of an enhanced energy performance standard on load-bearing masonry domestic construction: Understanding the gap between designed and real performance: lessons from Stamford Brook.

This report is aimed at those with interests in the procurement, design and construction of new dwellings both now and in the coming years as the Government’s increasingly stringent targets for low and zero carbon housing approach. It conveys the results of a research project, carried out between 2001 and 2008, that was designed to evaluate the extent to which low carbon housing standards can be achieved in the context of a large commercial housing development. The research was led by Leeds Metropolitan University in collaboration with University College London and was based on the Stamford Brook development in Altrincham, Cheshire. The project partners were the National Trust, Redrow and Taylor Wimpey and some 60 percent of the planned 700 dwelling development has been completed up to June 2008. As the UK house building industry and its suppliers grapple with the challenges of achieving zero carbon housing by 2016, the lessons arising from this project are timely and of considerable value. Stamford Brook has demonstrated that designing masonry dwellings to achieve an enhanced energy standard is feasible and that a number of innovative approaches, particularly in the area of airtightness, can be successful. The dwellings, as built, exceed the Building Regulations requirements in force at the time but tests on the completed dwellings and longer term monitoring of performance has shown that, overall, energy consumption and carbon emissions, under standard occupancy, are around 20 to 25 percent higher than design predictions. In the case of heat loss, the discrepancy can be much higher. The report contains much evidence of considerable potential but points out that realising the design potential requires a fundamental reappraisal of processes within the industry from design and construction to the relationship with its supply chain and the development of the workforce. The researchers conclude that, even when builders try hard, current mainstream technical and organisational practices together with industry cultures present barriers to consistent delivery of low and zero carbon performance. They suggest that the underlying reasons for this are deeply embedded at all levels of the house building industry. They point out also that without fundamental change in processes and cultures, technological innovations, whether they be based on traditional construction or modern methods are unlikely to reach their full potential. The report sets out a series of wide ranging implications for new housing in the UK, which are given in Chapter 14 and concludes by firmly declaring that cooperation between government, developers, supply chains, educators and researchers will be crucial to improvement. The recommendations in this report are already being put into practice by the researchers at Leeds Metropolitan University and University College London in their teaching and in further research projects. The implications of the work have been discussed across the industry at a series of workshops undertaken in 2008 as part of the LowCarb4Real project (see http://www.leedsmet.ac.uk/as/cebe/projects/lowcarb4real/index.htm). In addition, the learning is having an impact on the work of the developers (Redrow and Taylor Wimpey) who, with remarkable foresight and enthusiasm, hosted the project. This report seeks to make the findings more widely available and is offered for consideration by everyone who has a part to play in making low and zero carbon housing a reality

Regional resilience in recessionary times: a case study of the East Midlands

Purpose: Since the 1990's the fashion industry has reflected the issues generally arising in the manufacturing sector, namely rapid and deep structural changes, the development of new supply chain relationships, ICT impacts and increasing globalisation with the attendant issues of ethical sourcing, off-shoring, new emerging markets and recessionary ripples. This paper focuses on one particular aspect of the fashion industry, namely the apparel sector and in particular 'fast fashion' to explore the issues arising for the SMEs in the supply chain. Approach: The research adopts a qualitative methodology and is longitudinal in nature, spanning 5 years from August 2006. The first stage of the research is reported here, where a series of focussed interview scenarios were conducted over an eighteenth month period. The sample of 12 SMEs was a convenience one, drawn from the 30 participants who took part in a business to business event in Leicester, a geographical location which acts as a microcosm of the apparel industry. Interviews were used to elicit narrative data about was what was actually happening in these apparel supply chains. Findings: The apparel supply chain has changed significantly due to recessionary ripples and structural changes. The SMEs have had more success in managing the upstream rather than the downstream relationships and relationships between buyer and suppliers continue to be fractious. Innovation has occurred but is hampered by the relationships that persist. Culture has proved to be a key dimension

Questioning the relentless shift to offshore manufacturing

The last 20 years has seen a relentless shift to offshore manufacturing as retailers chase ever-lower labor costs. The results of this strategy can now be evaluated and we propose that some adjustments are in order. We analyze the case of a North American apparel manufacturer (Griffin Manufacturing, Inc.) that has successfully emerged from a period of major change with a strong and strategic position in the apparel supply chain. This case study documents Griffin’s survival through evolution in capabilities, technology, and especially attitude. The Griffin case study suggests that keeping a portion of the manufacturing onshore at an agile, quick response factory is cost effective: it increases sales and improves margins. However, the new relationship between the parties is much more complex and requires commitment on both sides

Steps towards Sustainability in Fashion: Snapshot Bangladesh A resource for fashion students and educators

This publication offers three case studies, alongside ideas of how they could be used to develop thinking in fashion education. They illustrate some of the different ways sustainability is being approached and interpreted through fashion business in Bangladesh. Case studies of People Tree, New Look and Echotex offer insights into ways in which organisations address long hours, low pay and buying practices. Case study Aranya Crafts offers a view focusing on pioneering work in in natural dyes. The case-studies, published in collaboration with Fashioning an Ethical Industry are an output of a British Council funded Development Partnerships in Higher Education (DelPHE) project bringing together LCF, the BGMEA Institute of Fashion Technology (BIFT) in Dhaka and the United Nations Industrial Development Organization (UNIDO) to deliver research that explores better practice and ways forward to improve the competitiveness of the Bangladesh manufacturing sector to add value in this area

Technologie en innovatie in Vlaanderen: Prioriteiten.

Vlaanderen;