Adoption of vehicular ad hoc networking protocols by networked robots

This paper focuses on the utilization of wireless networking in the robotics domain. Many researchers have already equipped their robots with wireless communication capabilities, stimulated by the observation that multi-robot systems tend to have several advantages over their single-robot counterparts. Typically, this integration of wireless communication is tackled in a quite pragmatic manner, only a few authors presented novel Robotic Ad Hoc Network (RANET) protocols that were designed specifically with robotic use cases in mind. This is in sharp contrast with the domain of vehicular ad hoc networks (VANET). This observation is the starting point of this paper. If the results of previous efforts focusing on VANET protocols could be reused in the RANET domain, this could lead to rapid progress in the field of networked robots. To investigate this possibility, this paper provides a thorough overview of the related work in the domain of robotic and vehicular ad hoc networks. Based on this information, an exhaustive list of requirements is defined for both types. It is concluded that the most significant difference lies in the fact that VANET protocols are oriented towards low throughput messaging, while RANET protocols have to support high throughput media streaming as well. Although not always with equal importance, all other defined requirements are valid for both protocols. This leads to the conclusion that cross-fertilization between them is an appealing approach for future RANET research. To support such developments, this paper concludes with the definition of an appropriate working plan

Localization Services for Online Common Operational Picture and Situation Awareness

Many operations, be they military, police, rescue, or other field operations, require localization services and online situation awareness to make them effective. Questions such as how many people are inside a building and their locations are essential. In this paper, an online localization and situation awareness system is presented, called Mobile Urban Situation Awareness System (MUSAS), for gathering and maintaining localization information, to form a common operational picture. The MUSAS provides multiple localization services, as well as visualization of other sensor data, in a common frame of reference. The information and common operational picture of the system is conveyed to all parties involved in the operation, the field team, and people in the command post. In this paper, a general system architecture for enabling localization based situation awareness is designed and the MUSAS system solution is presented. The developed subsystem components and forming of the common operational picture are summarized, and the future potential of the system for various scenarios is discussed. In the demonstration, the MUSAS is deployed to an unknown building, in an ad hoc fashion, to provide situation awareness in an urban indoor military operation.Peer reviewe

Cooperative Relative Positioning of Mobile Users by Fusing IMU Inertial and UWB Ranging Information

Relative positioning between multiple mobile users is essential for many applications, such as search and rescue in disaster areas or human social interaction. Inertial-measurement unit (IMU) is promising to determine the change of position over short periods of time, but it is very sensitive to error accumulation over long term run. By equipping the mobile users with ranging unit, e.g. ultra-wideband (UWB), it is possible to achieve accurate relative positioning by trilateration-based approaches. As compared to vision or laser-based sensors, the UWB does not need to be with in line-of-sight and provides accurate distance estimation. However, UWB does not provide any bearing information and the communication range is limited, thus UWB alone cannot determine the user location without any ambiguity. In this paper, we propose an approach to combine IMU inertial and UWB ranging measurement for relative positioning between multiple mobile users without the knowledge of the infrastructure. We incorporate the UWB and the IMU measurement into a probabilistic-based framework, which allows to cooperatively position a group of mobile users and recover from positioning failures. We have conducted extensive experiments to demonstrate the benefits of incorporating IMU inertial and UWB ranging measurements.Comment: accepted by ICRA 201

Langattomien anturiverkkojen sotilas-, agroteknologia- ja energiatutkimussovelluksia

The physical quantities nowadays are widely measured by using electronic sensors. Wireless sensor networks (WSNs) are low-cost, low-power electronic devices capable of collecting data using their onboard sensors. Some wireless sensor nodes are equipped with actuators, providing the possibility to change the state of the physical world. The ability to change the state of a physical system means that WSNs can be used in control and automation applications. This research focuses on appropriate system design for four different wireless measurement and control cases. The first case provides a hardware and software solution for camera integration to a wireless sensor node. The images are captured and processed inside the sensor node using low power computational techniques. In the second application, two different wireless sensor networks function in cooperation to overcome seeding problems in agricultural machinery. The third case focuses on indoor deployment of the wireless sensor nodes into an area of urban crisis, where the nodes supply localization information to friendly assets such as soldiers, firefighters and medical personnel. The last application focuses on a feasibility study for energy harvesting from asphalt surfaces in the form of heat.Fysikaaliset suureet mitataan nykyisin elektronisten anturien avulla. Langattomat anturiverkot ovat kustannustasoltaan edullisia, matalan tehonkulutuksen elektronisia laitteita, jotka kykenevät suorittamaan mittauksia niissä olevilla antureilla. Langattomat anturinoodit voidaan myös liittää toimilaitteisiin, jolloin ne voivat vaikuttaa fyysiseen ympäristöönsä. Koska langattomilla anturi- ja toimilaiteverkoilla voidaan vaikuttaa niiden fysikaalisen ympäristön tilaan, niiden avulla voidaan toteuttaa säätö- ja automaatiosovelluksia. Tässä väitöskirjaty össä suunnitellaan ja toteutetaan neljä erilaista langattomien anturi- ja toimilaiteverkkojen automaatiosovellusta. Ensimmäisenä tapauksena toteutetaan elektroniikka- ja ohjelmistosovellus, jolla integroidaan kamera langattomaan anturinoodiin. Kuvat tallennetaan ja prosessoidaan anturinoodissa vähän energiaa kuluttavia laskentamenetelmiä käyttäen. Toisessa sovelluksessa kahdesta erilaisesta langattomasta anturiverkosta koostuvalla järjestelmällä valvotaan siementen syöttöä kylvökoneessa. Kolmannessa sovelluksessa levitetään kaupunkiympäristössä kriisitilanteessa rakennuksen sisätiloihin langaton anturiverkko. Sen anturinoodit välittävät paikkatietoa rakennuksessa operoiville omille joukoille, jotka voivat tilanteesta riippuen olla esimerkiksi sotilaita, palomiehiä tai lääkintähenkilökuntaa. Neljännessä sovelluksessa toteutetaan langaton anturiverkko, jonka keräämää mittausdataa käytetään arvioitaessa lämpöenergian keräämismahdollisuuksia asfalttipinnoilta.fi=vertaisarvioitu|en=peerReviewed