Multiphase induction motor drives - a technology status review

The area of multiphase variable-speed motor drives in general and multiphase induction motor drives in particular has experienced a substantial growth since the beginning of this century. Research has been conducted worldwide and numerous interesting developments have been reported in the literature. An attempt is made to provide a detailed overview of the current state-of-the-art in this area. The elaborated aspects include advantages of multiphase induction machines, modelling of multiphase induction machines, basic vector control and direct torque control schemes and PWM control of multiphase voltage source inverters. The authors also provide a detailed survey of the control strategies for five-phase and asymmetrical six-phase induction motor drives, as well as an overview of the approaches to the design of fault tolerant strategies for post-fault drive operation, and a discussion of multiphase multi-motor drives with single inverter supply. Experimental results, collected from various multiphase induction motor drive laboratory rigs, are also included to facilitate the understanding of the drive operatio

New Topologies and Advanced Control of Power Electronic Converters for Renewable Energy based Microgrids

Solar energy-based microgrids are increasingly promising due to their many features, such as being environmentally friendly and having low operating costs. Power electronic converters, filters, and transformers are the key components to integrate the solar photovoltaic (PV) systems with the microgrids. The power electronic converters play an important role to reduce the size of the filter circuit and eliminate the use of the bulky and heavy traditional power frequency step-up transformer. These power converters also play a vital role to integrate the energy storage systems such as batteries and the superconducting magnetic energy storage (SMES) unit in a solar PV power-based microgrid. However, the performance of these power converters depends upon the switching technique and the power converter configuration. The switching techniques can improve the power quality, i.e. lower total harmonic distortion at the converter output waveform, reduce the converter power loss, and can effectively utilize the dc bus voltage, which helps to improve the power conversion efficiency of the power electronic converter. The power converter configuration can reduce the size of the power converter and make the power conversion system more efficient. In addition to the advanced switching technique, a supervisory control can also be integrated with these power converters to ensure the optimal power flow within the microgrid. First, this thesis reviews different existing power converter topologies with their switching techniques and control strategies for the grid integration of solar PV systems. To eliminate the use of the bulky and heavy line frequency step-up transformer to integrate solar PV systems to medium voltage grids, the high frequency magnetic linkbased medium voltage power converter topologies are discussed and compared based on their performance parameters. Moreover, switching and conduction losses are calculated to compare the performance of the switching techniques for the magnetic-linked power converter topologies. In this thesis, a new pulse width modulation technique has been proposed to integrate the SMES system with the solar PV system-based microgrid. The pulse width modulation technique is designed to provide reactive power into the network in an effective way. The modulation technique ensures lower total harmonic distortion (THD), lower switching loss, and better utilization of dc-bus voltage. The simulation and experimental results show the effectiveness of the proposed pulse width modulation technique. In this thesis, an improved version of the previously proposed switching technique has been designed for a transformer-less PV inverter. The improved switching technique can ensure effective active power flow into the network. A new switching scheme has been proposed for reactive power control to avoid unnecessary switching faced by the traditional switching technique in a transformer-less PV inverter. The proposed switching technique is based on the peak point value of the grid current and ensures lower switching loss compared to other switching techniques. In this thesis, a new magnetic-linked multilevel inverter has been designed to overcome the issues faced by the two-level inverters and traditional multilevel inverters. The proposed multilevel inverter utilizes the same number of electronic switches but fewer capacitors compared to the traditional multilevel inverters. The proposed multilevel inverter solves the capacitor voltage balancing and utilizes 25% more of the dc bus voltage compared to the traditional multilevel inverter, which reduces the power rating of the dc power source components and also extends the input voltage operating range of the inverter. An improved version magnetic-linked multilevel inverter is proposed in this thesis with a model predictive control technique. This multilevel inverter reduces both the number of switches and capacitors compared to the traditional multilevel inverter. This multilevel inverter also solves the capacitor voltage balancing issue and utilizes 50% more of the dc bus voltage compared to the traditional multilevel inverter. Finally, an energy management system has been designed for the developed power converter and control to achieve energy resiliency and minimum operating cost of the microgrid. The model predictive control-based energy management system utilizes the predicted load data, PV insolation data from web service, electricity price data, and battery state of charge data to select the battery charging and discharging pattern over the day. This model predictive control-based supervisory control with the advanced power electronic converter and control makes the PV energy-based microgrid more efficient and reliable

Multilevel Converters: An Enabling Technology for High-Power Applications

| Multilevel converters are considered today as the state-of-the-art power-conversion systems for high-power and power-quality demanding applications. This paper presents a tutorial on this technology, covering the operating principle and the different power circuit topologies, modulation methods, technical issues and industry applications. Special attention is given to established technology already found in industry with more in-depth and self-contained information, while recent advances and state-of-the-art contributions are addressed with useful references. This paper serves as an introduction to the subject for the not-familiarized reader, as well as an update or reference for academics and practicing engineers working in the field of industrial and power electronics.Ministerio de Ciencia y Tecnología DPI2001-3089Ministerio de Eduación y Ciencia d TEC2006-0386

Switching Frequency Effects on the Efficiency and Harmonic Distortion in a Three-Phase Five-Level CHBMI Prototype with Multicarrier PWM Schemes: Experimental Analysis

The current climatic scenario requires the use of innovative solutions to increase the production of electricity from renewable energy sources. Multilevel Power Inverters are a promising solution to improve the penetration of renewable energy sources into the electrical grid. Moreover, the performance of MPIs is a function of the modulation strategy employed and of its features (modulation index and switching frequency). This paper presents an extended and experimental analysis of three-phase five-level Cascaded H-Bridges Multilevel Inverter performance in terms of efficiency and harmonic content considering several MC PWM modulation strategies. In detail, the CHBMI performance is analyzed by varying the modulation index and the switching frequency. For control purposes, the NI System On Module sbRIO-9651 control board, a dedicated FPGA-based control board for power electronics and drive applications programmable in the LabVIEW environment, is used. The paper describes the modulation strategies implementation, the test bench set-up, and the experimental investigations carried out. The results obtained in terms of Total Harmonic Distorsion (THD) and efficiency are analyzed, compared, and discussed

Multilevel inverters for renewable energy systems

Voltage source inverters have become widely used in the last decade primarily due to the fact that the dangers and limitations of relying on fossil fuel based power generation have been seen and the long term effects felt especially with regards to climate change. Policies and targets have been implemented such as from the United Nations climate change conference (COPxx) concerning human activities that contribute to global warming from individual countries. The most effective way of reducing these greenhouse gases is to turn to renewable energy sources such as the solar, wind etc instead of coal. Converters play the crucial role of converting the renewable source dc power to ac single phase or multiphase. The advancement in research in renewable energy sources and energy storage has made it possible to do things more efficiently than ever before. Regular or 2 level inverters are adequate for low power low voltage applications but have drawbacks when being used in high power high voltage applications as switching components have to be rated upwards and also switch between very high potential differences. To lessen the constraints on the switching components and to reduce the filtering requirements, multilevel inverters (MLI's) are preferred over two level voltage source inverters (VSI's). This thesis discusses the implementation of various types of MLI's and compares four different pulse width modulation (pwm) techniques that are often used in MLI under consideration: three, five, seven and nine level inverters. Harmonic content of the output voltage is recorded across a range of modulation indices for each of the three popular topologies in literature. Output from the inverter is filtered using an L only and an LC filter whose design techniques are presented. A generalized prediction algorithm using machine learning techniques to give the value of the expected THD as the modulation index is varied for a specific topology and PWM switching method is proposed in this study. Simulation and experimental results are produced in five level form to verify and validate the proposed algorithm

High-performance motor drives

This article reviews the present state and trends in the development of key parts of controlled induction motor drive systems: converter topologies, modulation methods, as well as control and estimation techniques. Two- and multilevel voltage-source converters, current-source converters, and direct converters are described. The main part of all the produced electric energy is used to feed electric motors, and the conversion of electrical power into mechanical power involves motors ranges from less than 1 W up to several dozen megawatts

Direct usage of photovoltaic solar panels to supply a freezer motor with variable DC input voltage

In this paper, a single-phase photovoltaic (PV) inverter fed by a boost converter to supply a freezer motor with variable DC input is investigated. The proposed circuit has two stages. Firstly, the DC output of the PV panel that varies between 150 and 300 V will be applied to the boost converter. The boost converter will boost the input voltage to a fixed 300 V DC. Next, this voltage is supplied to the single-phase full-bridge inverter to obtain 230 V AC. In the end, The output of the inverter will feed a freezer motor. The PV panels can be stand-alone or grid-connected. The grid-connected PV is divided into two categories, such as with a transformer and without a transformer, a transformer type has galvanic isolation resulting in increasing the security and also provides no further DC current toward the grid, but it is expensive, heavy and bulky. The transformerless type holds high efficiency and it is cheaper, but it suffers from leakage current between PV and the grid. This paper proposes a stand-alone direct use of PV to supply a freezer; therefore, no grid connection will result in no leakage current between the PV and Grid. The proposed circuit has some features such as no filtering circuit at the output of the inverter, no battery in the system, DC-link instead of AC link that reduces no-loads, having a higher efficiency, and holding enough energy in the DC-link capacitor to get the motor started. The circuit uses no transformers, thus, it is cheaper and has a smaller size. In addition, the system does not require a complex pulse width modulation (PWM) technique, because the motor can operate with a pulsed waveform. The control strategy uses the PWM signal with the desired timing. With this type of square wave, the harmonics (5th and 7th) of the voltage are reduced. The experimental and simulation results are presented to verify the feasibility of the proposed strategy

Impact Evaluation of Innovative Selective Harmonic Mitigation Algorithm for Cascaded H-Bridge Inverter on IPMSM Drive Application

This paper presents a detailed analysis of the use of a novel Harmonic Mitigation algorithm for Cascaded H-Bridge Multilevel Inverter in electrical drives for the transportation field. For this purpose, an enhanced mathematical model of Interior Permanent Magnet Synchronous Motor (IPMSM), that takes into account simultaneously saturation, cross-coupling, spatial harmonics, and iron loss effects, has been used. In detail, this model allows estimating accurately the efficiency and the torque ripple of the IPMSM, crucial parameters for transportation applications. Moreover, two traditional pulse width modulation strategies, Sinusoidal Phase-Shifted and Switching Frequency Optimal Phase-Shifted have been considered for comparison purposes with an optimized harmonic mitigation algorithm. Thus, this work provides a deep analysis of IPMSM drive performance fed by CHBMI, paying attention to various aspects such as the IPMSM efficiency, torque ripple, current, and voltage total harmonic distortion (THD). Finally, experimental investigations have been carried out to validate the analysis conducted

Application of the cascaded multilevel inverter as a shunt active power filter

Abstract unavailable please refer to PD

Addressing control and capacitor voltage regulation challenges in multilevel power electronic converters

Multilevel power electronic converters are the current industry solutions for applications that demand medium voltage, reasonable efficiency, and high power quality. The proper operation of these types of power converters requires special control, modulation methods, and capacitor voltage regulation techniques. Both developing capacitor voltage regulation methods and addressing their associated issues with such fall within the primary focus of this dissertation. In this dissertation an investigation was conducted on the capacitor voltage regulation constraints in cascaded H-bridge multilevel converters with a staircase output voltage waveform. In the proposed method, the harmonic elimination technique is used to determine the switching angles. A constraint was then derived to identify modulation those indices that lead to voltage regulation of the capacitor. This constraint can be used in optimization problems for harmonic minimization to guarantee capacitor voltage regulation in these types of converters. Furthermore, a capacitor voltage regulation method was developed using redundant state selection for a flying capacitor active rectifier. This method reduces the number of switching instances by using both online and offline state selection procedure. Additionally, a start-up procedure is proposed that pre-charges the all of capacitors in the rectifier to both avoid overstressing the switches and obtain a smoother start-up. Finally, a flexible capacitor voltage regulation method is proposed that provides the ability to control the voltage of the capacitors in both cascaded H-bridge and hybrid multilevel converters. In this method, the capacitor voltage in each individual H-bridge cell is independently regulated by controlling the active power of each cell