Complex railway systems: capacity and utilisation of interconnected networks

Introduction Worldwide the transport sector faces several issues related to the rising of traffic demand such as congestion, energy consumption, noise, pollution, safety, etc. Trying to stem the problem, the European Commission is encouraging a modal shift towards railway, considered as one of the key factors for the development of a more sustainable European transport system. The coveted increase in railway share of transport demand for the next decades and the attempt to open up the rail market (for freight, international and recently also local services) strengthen the attention to capacity usage of the system. This contribution proposes a synthetic methodology for the capacity and utilisation analysis of complex interconnected rail networks; the procedure has a dual scope since it allows both a theoretically robust examination of suburban rail systems and a solid approach to be applied, with few additional and consistent assumptions, for feasibility or strategic analysis of wide networks (by efficiently exploiting the use of Big Data and/or available Open Databases). Method In particular the approach proposes a schematization of typical elements of a rail network (stations and line segments) to be applied in case of lack of more detailed data; in the authors’ opinion the strength points of the presented procedure stem from the flexibility of the applied synthetic methods and from the joint analysis of nodes and lines. The article, after building a quasiautomatic model to carry out several analyses by changing the border conditions or assumptions, even presents some general abacuses showing the variability of capacity/utilization of the network’s elements in function of basic parameters. Results This has helped in both the presented case studies: one focuses on a detailed analysis of the Naples’ suburban node, while the other tries to broaden the horizon by examining the whole European rail network with a more specific zoom on the Belgium area. The first application shows how the procedure can be applied in case of availability of fine-grained data and for metropolitan/regional analysis, allowing a precise detection of possible bottlenecks in the system and the individuation of possible interventions to relieve the high usage rate of these elements. The second application represents an on-going attempt to provide a broad analysis of capacity and related parameters for the entire European railway system. It explores the potentiality of the approach and the possible exploitation of different ‘Open and Big Data’ sources, but the outcomes underline the necessity to rely on proper and adequate information; the accuracy of the results significantly depend on the design and precision of the input database. Conclusion In conclusion, the proposed methodology aims to evaluate capacity and utilisation rates of rail systems at different geographical scales and according to data availability; the outcomes might provide valuable information to allow efficient exploitation and deployment of railway infrastructure, better supporting policy (e.g. investment prioritization, rail infrastructure access charges) and helping to minimize costs for users.The presented case studies show that the method allows indicative evaluations on the use of the system and comparative analysis between different elementary components, providing a first identification of ‘weak’ links or nodes for which, then, specific and detailed analyses should be carried out, taking into account more in depth their actual configuration, the technical characteristics and the real composition of the traffic (i.e. other elements influencing the rail capacity, such as: the adopted operating systems, the station traffic/route control & safety system, the elastic release of routes, the overlap of block sections, etc.)

Operations research in passenger railway transportation

In this paper, we give an overview of state-of-the-art OperationsResearch models and techniques used in passenger railwaytransportation. For each planning phase (strategic, tactical andoperational), we describe the planning problems arising there anddiscuss some models and algorithms to solve them. We do not onlyconsider classical, well-known topics such as timetabling, rollingstock scheduling and crew scheduling, but we also discuss somerecently developed topics as shunting and reliability oftimetables.Finally, we focus on several practical aspects for each of theseproblems at the largest Dutch railway operator, NS Reizigers.passenger railway transportation;operation research;planning problems

CO2 Emission Reduction in Freight Transports How to Stimulate Environmental Friendly Behaviour?

In the European Union (EU) and in Germany the transport sector is the only sector with increasing CO2 emissions (in the EU by about 32 % and in Germany by about 1 % since 1990). Especially in road freight and air transport a further strong increase is forecasted. In the transport sector this might be impeded by avoiding transport (accepting a lower economic growth), shifting modes or in optimizing logistics. Especially the second is mentioned to be an adequate solution to meet the increasing demand for transportation and reducing CO2 emissions simulatneously. It is often stated, that combined transport (mainly truck-train-truck) might be a very CO2 efficient mode. In this article a Logit-Model (based on a survey of 500 German forwarders) is used to determine mode shift potentials of hauliers. The main factors of influence depending on the service provision of the transport modes are frequency of combined transport services, speed, and costs. For an estimation of the corresponding impact on the mode shift and thus potentials of CO2 emission reductions two policy instruments are empirically tested: a further increase of the performance-based heavy vehicle fee (LSVA-Maut) and a hypothetical speeding up of the average speed in freight rail transport to 80 km per hour. Although the modal shift is rather high in the last policy simulation, the impact on CO2 emissions is still small. --Freight Transports,CO2 Emissions,Mode Shift,Combined Transport

Modelling rail track deterioration and maintenance: current practices and future needs

As commercialisation and privatisation of railway systems reach the political agendas in a number of countries, including Australia, the separation of infrastructure from operating business dictates that track costs need to be shared on an equitable basis. There is also a world-wide trend towards increased pressures on rail track infrastructure through increases in axle loads and train speeds. Such productivity and customer service driven pressures inevitably lead to reductions in the life of track components and increases in track maintenance costs. This paper provides a state-of-the-art review of track degradation modeling, as well as an overview of track maintenance decision support systems currently in use in North America and Europe. The essential elements of a maintenance optimisation model currently under development are also highlighted

An Integrated Framework Integrating Monte Carlo Tree Search and Supervised Learning for Train Timetabling Problem

The single-track railway train timetabling problem (TTP) is an important and complex problem. This article proposes an integrated Monte Carlo Tree Search (MCTS) computing framework that combines heuristic methods, unsupervised learning methods, and supervised learning methods for solving TTP in discrete action spaces. This article first describes the mathematical model and simulation system dynamics of TTP, analyzes the characteristics of the solution from the perspective of MCTS, and proposes some heuristic methods to improve MCTS. This article considers these methods as planners in the proposed framework. Secondly, this article utilizes deep convolutional neural networks to approximate the value of nodes and further applies them to the MCTS search process, referred to as learners. The experiment shows that the proposed heuristic MCTS method is beneficial for solving TTP; The algorithm framework that integrates planners and learners can improve the data efficiency of solving TTP; The proposed method provides a new paradigm for solving TTP

Capacity assessment of railway infrastructure: Tools, methodologies and policy relevance in the EU context

The transport sector is increasingly faced with several issues related to the rising of traffic demand such as congestion, energy consumption, noise, pollution, safety, etc.. Due to its low external and environmental costs, railway can be considered (together with inland waterways and short-sea-shipping) as a key factor for the sustainable development of a more competitive and resource-efficient transport system (European Commission, White Paper 2011). In order to reinforce the role of rail in European transport , there is a strong need of addressing the efficiency of the system and customers' satisfaction through targeted actions, i.e. rising reliability and quality of service. This becomes particularly pressing as many parts of the existing railway infrastructures are reaching their maximum capacity thus shrinking their capability to provide users and customers a higher or even adequate level of service. Taking also into account that transport demand forecasts for 2030 clearly show a marked increase of rail activity across the whole Europe, we aim to address the issue of rail congestion in the context of relevant policy questions: Is the actual rail Infrastructure really able to absorb forecasted traffic, without significant impacts on punctuality of the system? Would the already planned interventions on the European railway infrastructure guarantee an adequate available capacity and consequently adequate reliability and level of service? To which extent would the coveted competition in an open railway market be influenced by capacity scarcity, mainly during peak hours or along more profitable corridors? An accurate estimation of capacity of the rail network can help answer these questions, leading policy makers to better decisions and helping to minimize costs for users. In this context this report explores the issue of capacity scarcity and sets this issue in the context of other relevant policy issues (track access charges, cost/benefit and accessibility measures, maintenance programmes, freight services’ reliability, external, marginal congestion or scarcity cost for rail, impacts of climate changes, etc.), providing a methodological review of capacity and punctuality assessment procedures. To better explore the real applicability and the time and/or data constraints of each methodology, the study reports some practical applications to the European railway network. Finally in the last section the report discusses the topic from a modelling perspective, as the quantitative estimation of railway capacity constraints is a key issue in order to provide better support to transport policies at EU level.JRC.J.1-Economics of Climate Change, Energy and Transpor

Passenger sharing of the high-speed railway from sensitivity analysis caused by price and run-time based on the multi-agent system

Purpose: Nowadays, governments around the world are active in constructing the high-speed railway. Therefore, it is significant to make research on this increasingly prevalent transport. Design/methodology/approach: In this paper, we simulate the process of the passenger’s travel mode choice by adjusting the ticket fare and the run-time based on the multi-agent system (MAS). Findings: From the research we get the conclusion that increasing the run-time appropriately and reducing the ticket fare in some extent are effective ways to enhance the passenger sharing of the high-speed railway. Originality/value: We hope it can provide policy recommendations for the railway sectors in developing the long-term plan on high-speed railway in the future.Peer Reviewe

Application of Multicriteria Decision-Making Methods in Railway Engineering: A Case Study of Train Control Information Systems (TCIS)

In order to improve its position in the transport market railway, as a complex system, it has to fulfill a number of objectives such as increased capacity and asset utilization, improved reliability and safety, higher customer service levels, better energy efficiency and fewer emissions, along with increased economic viability and profits. Some of these objectives call for the implementation of maximum values, while some of them require minimum values. Additionally, some can be expressed quantitatively, while some, for example, customer service, can be described qualitatively through a descriptive scale of points. The application of MCDM in railway engineering can play a significant role. Therefore, the major objective of this chapter is the review of the application of MCDM methods in railway engineering. As one of the means in achieving the objectives of railways and above all the utilization of capacity are Train Control Information Systems (TCIS). Based on that, the aim of this chapter is the evaluation of the efficiency of TCIS in the improvement of railway capacity utilization through defined technical-technological indicators. The non-radial Data Envelopment Analysis (DEA) model for the evaluation of TCIS efficiency in improvement of utilization of railway capacity using the selected indicators is proposed. The proposed non-radial DEA model for TCIS efficiency evaluation in using railway capacity could be applied to an overall network or for separate parts of railway lines