Spare capacity modelling and its applications in survivable iP-over-optical networks

As the interest in IP-over-optical networks are becoming the preferred core network architecture, survivability has emerged as a major concern for network service providers; a result of the potentially huge traffic volumes that will be supported by optical infrastructure. Therefore, implementing recovery strategies is critical. In addition to the traditional recovery schemes based around protection and restoration mechanisms, pre-allocated restoration represents a potential candidate to effect and maintain network resilience under failure conditions. Preallocated restoration technique is particularly interesting because it provides a trade-off in terms of recovery performance and resources between protection and restoration schemes. In this paper, the pre-allocated restoration performance is investigated under single and dual-link failures considering a distributed GMPLSbased IP/WDM mesh network. Two load-based spare capacity optimisation methods are proposed in this paper; Local Spare Capacity Optimisation (LSCO) and Global Spare Capacity Optimisation (GSCO)

Segment Routing: a Comprehensive Survey of Research Activities, Standardization Efforts and Implementation Results

Fixed and mobile telecom operators, enterprise network operators and cloud providers strive to face the challenging demands coming from the evolution of IP networks (e.g. huge bandwidth requirements, integration of billions of devices and millions of services in the cloud). Proposed in the early 2010s, Segment Routing (SR) architecture helps face these challenging demands, and it is currently being adopted and deployed. SR architecture is based on the concept of source routing and has interesting scalability properties, as it dramatically reduces the amount of state information to be configured in the core nodes to support complex services. SR architecture was first implemented with the MPLS dataplane and then, quite recently, with the IPv6 dataplane (SRv6). IPv6 SR architecture (SRv6) has been extended from the simple steering of packets across nodes to a general network programming approach, making it very suitable for use cases such as Service Function Chaining and Network Function Virtualization. In this paper we present a tutorial and a comprehensive survey on SR technology, analyzing standardization efforts, patents, research activities and implementation results. We start with an introduction on the motivations for Segment Routing and an overview of its evolution and standardization. Then, we provide a tutorial on Segment Routing technology, with a focus on the novel SRv6 solution. We discuss the standardization efforts and the patents providing details on the most important documents and mentioning other ongoing activities. We then thoroughly analyze research activities according to a taxonomy. We have identified 8 main categories during our analysis of the current state of play: Monitoring, Traffic Engineering, Failure Recovery, Centrally Controlled Architectures, Path Encoding, Network Programming, Performance Evaluation and Miscellaneous...Comment: SUBMITTED TO IEEE COMMUNICATIONS SURVEYS & TUTORIAL

Exploiting the power of multiplicity: a holistic survey of network-layer multipath

The Internet is inherently a multipath network: For an underlying network with only a single path, connecting various nodes would have been debilitatingly fragile. Unfortunately, traditional Internet technologies have been designed around the restrictive assumption of a single working path between a source and a destination. The lack of native multipath support constrains network performance even as the underlying network is richly connected and has redundant multiple paths. Computer networks can exploit the power of multiplicity, through which a diverse collection of paths is resource pooled as a single resource, to unlock the inherent redundancy of the Internet. This opens up a new vista of opportunities, promising increased throughput (through concurrent usage of multiple paths) and increased reliability and fault tolerance (through the use of multiple paths in backup/redundant arrangements). There are many emerging trends in networking that signify that the Internet's future will be multipath, including the use of multipath technology in data center computing; the ready availability of multiple heterogeneous radio interfaces in wireless (such as Wi-Fi and cellular) in wireless devices; ubiquity of mobile devices that are multihomed with heterogeneous access networks; and the development and standardization of multipath transport protocols such as multipath TCP. The aim of this paper is to provide a comprehensive survey of the literature on network-layer multipath solutions. We will present a detailed investigation of two important design issues, namely, the control plane problem of how to compute and select the routes and the data plane problem of how to split the flow on the computed paths. The main contribution of this paper is a systematic articulation of the main design issues in network-layer multipath routing along with a broad-ranging survey of the vast literature on network-layer multipathing. We also highlight open issues and identify directions for future work

Software Defined Applications in Cellular and Optical Networks

abstract: Small wireless cells have the potential to overcome bottlenecks in wireless access through the sharing of spectrum resources. A novel access backhaul network architecture based on a Smart Gateway (Sm-GW) between the small cell base stations, e.g., LTE eNBs, and the conventional backhaul gateways, e.g., LTE Servicing/Packet Gateways (S/P-GWs) has been introduced to address the bottleneck. The Sm-GW flexibly schedules uplink transmissions for the eNBs. Based on software defined networking (SDN) a management mechanism that allows multiple operator to flexibly inter-operate via multiple Sm-GWs with a multitude of small cells has been proposed. This dissertation also comprehensively survey the studies that examine the SDN paradigm in optical networks. Along with the PHY functional split improvements, the performance of Distributed Converged Cable Access Platform (DCCAP) in the cable architectures especially for the Remote-PHY and Remote-MACPHY nodes has been evaluated. In the PHY functional split, in addition to the re-use of infrastructure with a common FFT module for multiple technologies, a novel cross functional split interaction to cache the repetitive QAM symbols across time at the remote node to reduce the transmission rate requirement of the fronthaul link has been proposed.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Efficient and robust routing of highly variable traffic

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, February 2006.Includes bibliographical references (p. 316-324).Many emerging applications for the Internet are characterized by highly variable traffic behavior over time that is difficult to predict. Classical approaches to network design rely on a model in which a single traffic matrix is estimated. When actual traffic does not conform to such assumptions, desired bandwidth guarantees cannot be provided to the carried traffic. Currently, Internet Service Providers (ISPs) use gross capacity over-provisioning and manual routing adaptation to avoid network congestion caused by unpredictable traffic. These lead to increased network equipment and operational costs. Development of routing infrastructures that optimize network resources while accommodating extreme traffic unpredictability in a robust and efficient manner will be one of the defining themes in the next phase of expansion of the Internet. This thesis proposes two-phase routing as a capacity efficient and robust strategy for handling highly variable traffic. The scheme allows preconfiguration of the network such that all traffic patterns permissible within the network's natural ingress-egress capacity constraints can be routed with bandwidth guarantees without requiring detection of traffic changes in real-time or reconfiguring the network in response to it.(cont.) The scheme routes traffic in two phases -- traffic entering the network is sent from the source to a set of intermediate nodes in predetermined split ratios that depend on the intermediate nodes, and then from the intermediate nodes to the final destination. The scheme has the desirable properties of supporting static optical layer provisioning in IP-over-Optical networks and indirection in specialized service overlay models unlike previous approaches -- like direct source-destination path routing - for handling variable traffic. This thesis represents the first comprehensive study, problem formulation, and algorithm design for many aspects of two-phase routing. Our contributions can be grouped into three broad parts. First, we consider the problems of minimum cost network design and maximum throughput network routing for the scheme. We give a simple solution for minimum cost network design. For maximum throughput network routing. we design linear program.ling based and combinatorial algorithms. We show how the algorithms can handle a total cost constraint for maximum throughput two-phase routing. This can be used to solve the link capacitate version of minimum cost two-phase routing.(cont.) We establish theoretical bounds on the resource requirements of two-phase routing under throughput and cost models with respect to the optimal scheme that is allowed to make the routing dynamically dependent on the current traffic matrix. We also generalize the traffic split ratios to depend not only on the intermediate nodes but also on source and destination of traffic and solve the corresponding optimization problems. Second, we consider making two-phase routing resilient to network failures. Two-phase routing in IP-over-Optical networks can be protected against router node failures through redistribution of traffic split ratio for the failed router node to other intermediate nodes. We propose two different schemes for provisioning the optical layer to handle router node failures. We develop linear programming formulations for both schemes and a fast combinatorial algorithm for the second scheme so as to maximize network throughput. Two-phase routing can be made resilient against link failures by protecting the first and second phase paths using pre-provisioned restoration mechanisms. We consider three such restoration mechanisms - local (link/span) restoration, K-route path restoration, and shared backup path restoration.(cont.) We provide linear programming formulations and combinatorial algorithms for maximum throughput two-phase routing with local restoration and K-route path restoration. We show that the problem of maximum throughput two-phase routing with shared backup path restoration is JVP-hard. Assuming an approximation oracle for a certain disjoint paths problem (which we also show to be AP-hard), we design a combinatorial algorithm with provable guarantees. Third, we consider the application of two-phase routing to multi-hop Wireless Mesh Networks (WMNs). These networks have recently been of much research interest due to their lowered need for wired infrastructure support and due to envisaged new applications like community wireless networks. We extend our optimization framework for maximum throughput two-phase routing in wired networks to handle routing and scheduling constraints that are peculiar to WMNs and arise from the requirement to handle radio transmit/receive diversity and the phenomenon of wireless link interference. We evaluate various aspects of two-phase routing on actual ISP topologies using the developed algorithms. For the WMN application, we use randomly generated WMN topologies for the evaluations.by Sudipta Sengupta.Ph.D