Distributed time management in transputer networks

For real-time applications in a distributed system a common notion of time is indispensable. Clocks are used for time measurement, determination of causality, process synchronization and generating unique identifications. All this is only possible if there is a time reference of specified accuracy. Since the local clocks in a distributed system tend to drift away from each other, they need to be adjusted periodically. If the application allows an accuracy that can be met by software, this may be achieved by a distributed clock synchronization algorithm, which creates and maintains a global time reference for all nodes of the network. The design and simulation of such an algorithm for a distributed system consisting of transputers is described. It is based on second order filtered adjustment of the clock rates rather than updating the clock values at onc

An empirical evaluation of techniques for parallel simulation of message passing networks

209 p.[EN]In the field of computer design, simulation is an essential tool to validate and evaluate architectural proposals. Conventional simulation techniques, designed for their use in sequential computers, are too slow if the system to simulate is large or complex. The aim of this work is to search for techniques to accelerate simulations exploiting the parallelism available in current, commercial multicomputers, and to use these techniques to study a model of a message router. This router has been designed to constitute the communication infrastructure of a (hypothetical) massively parallel computer. Three parallel simulation techniques have been considered: synchronous, asynchronous-conservative and asynchronous-optimistic. These algorithms have been implemented in three multicomputers: a transputer-based Supernode, an Intel Paragon and a network of workstations. The influence that factors such as the characteristics of the simulated models, the organization of the simulators and the characteristics of the target multicomputers have in the performance of the simulations has been measured and characterized. It is concluded that optimistic parallel simulation techniques are not suitable for the considered kind of models, although they may provide good performance in other environments. A network of workstations is not the right platform for our experiments, because the communication demands of the parallel simulators surpass the abilities of local area networks—the granularity is too fine. Synchronous and conservative parallel simulation techniques perform very well in the Supernode and in the Paragon, specially if the model to simulate is complex or large—precisely the worst case for traditional, sequential simulators. This way, studies previously considered as unrealizable, due to their exceedingly high computational cost, can be performed in reasonable times. Additionally, the spectrum of possibilities of using multicomputers can be broadened to execute more than numeric applications.[ES]En el ámbito del diseño de computadores, la simulación es una herramienta imprescindible para la validación y evaluación de cualquier propuesta arquitectónica. Las ténicas convencionales de simulación, diseñadas para su utilización en computadores secuenciales, son demasiado lentas si el sistema a simular es grande o complejo. El objetivo de esta tesis es buscar técnicas para acelerar estas simulaciones, aprovechando el paralelismo disponible en multicomputadores comerciales, y usar esas técnicas para el estudio de un modelo de encaminador de mensajes. Este encaminador está diseñado para formar infraestructura de comunicaciones de un hipotético computador masivamente paralelo. En este trabajo se consideran tres técnicas de simulación paralela: síncrona, asíncrona-conservadora y asíncrona-optimista. Estos algoritmos se han implementado en tres multicomputadores: un Supernode basado en Transputers, un Intel Paragon y una red de estaciones de trabajo. Se caracteriza la influencia que tienen en las prestaciones de los simuladores aspectos tales como los parámetros del modelo simulado, la organización del simulador y las características del multicomputador utilizado. Se concluye que las técnicas de simulación paralela optimista no resultan adecuadas para trabajar con el modelo considerado, aunque pueden ofrecer un buen rendimiento en otros entornos. La red de estaciones de trabajo no resulta una plataforma apropiada para estas simulaciones, ya que una red local no reúne condiciones para la ejecución de aplicaciones paralelas de grano fino. Las técnicas de simulación paralela síncrona y conservadora dan muy buenos resultados en el Supernode y en el Paragon, especialmente si el modelo a simular es complejo o grande—precisamente el peor caso para los algoritmos secuenciales. De esta forma, estudios previamente considerados inviables, por ser demasiado costosos computacionalmente, pueden realizarse en tiempos razonables. Además, se amplía el espectro de posibilidades de los multicomputadores, utilizándolos para algo más que aplicaciones numéricas.Este trabajo ha sido parcialmente subvencionado por la Comisión Interministerial de Ciencia y Tecnología, bajo contrato TIC95-037

Implementing tuple space on transputer meshes

Research Report submitted to the Faculty of Science, University of the Witwatersrand, Johannesburg, towards a partial fulfilment of the requirements for the degree of Master of Science Johannesburg 1991This report describes and evaluates an implementation of the Linda tuple space abstraction on Transputer networks. There is evidence that suggests a need for a new programming methodology to support Transputer-based applications, and Linda, as an attractive and elegant alternative to existing methodologies, has great potential for this role. The research focuses on the implementation of a particular tuple space model, intermediate uniform distribution, on Transputer meshes. The objective of the research is to ascertain the extent of the communication overheads inherent in the implementation and hence evaluate the feasibility of the approach. The overheads are measured relative to message passing performance on native Transputer networks, and are shown to be significant. It is concluded that although the specific tuple space model is not ideally suited to Transputer-based systems and the implementation, as it stands, is too inefficient to be of practical use, the approach requires further exploration in order to exhaust its full research potential.MT201

Parallel simulation techniques for telecommunication network modelling

In this thesis, we consider the application of parallel simulation to the performance modelling of telecommunication networks. A largely automated approach was first explored using a parallelizing compiler to speed up the simulation of simple models of circuit-switched networks. This yielded reasonable results for relatively little effort compared with other approaches. However, more complex simulation models of packet- and cell-based telecommunication networks, requiring the use of discrete event techniques, need an alternative approach. A critical review of parallel discrete event simulation indicated that a distributed model components approach using conservative or optimistic synchronization would be worth exploring. Experiments were therefore conducted using simulation models of queuing networks and Asynchronous Transfer Mode (ATM) networks to explore the potential speed-up possible using this approach. Specifically, it is shown that these techniques can be used successfully to speed-up the execution of useful telecommunication network simulations. A detailed investigation has demonstrated that conservative synchronization performs very well for applications with good look ahead properties and sufficient message traffic density and, given such properties, will significantly outperform optimistic synchronization. Optimistic synchronization, however, gives reasonable speed-up for models with a wider range of such properties and can be optimized for speed-up and memory usage at run time. Thus, it is confirmed as being more generally applicable particularly as model development is somewhat easier than for conservative synchronization. This has to be balanced against the more difficult task of developing and debugging an optimistic synchronization kernel and the application models

Reducing Communication Delay Variability for a Group of Robots

A novel architecture is presented for reducing communication delay variability for a group of robots. This architecture relies on using three components: a microprocessor architecture that allows deterministic real-time tasks; an event-based communication protocol in which nodes transmit in a TDMA fashion, without the need of global clock synchronization techniques; and a novel communication scheme that enables deterministic communications by allowing senders to transmit without regard for the state of the medium or coordination with other senders, and receivers can tease apart messages sent simultaneously with a high probability of success. This approach compared to others, allows simultaneous communications without regard for the state of the transmission medium, it allows deterministic communications, and it enables ordered communications that can be a applied in a team of robots. Simulations and experimental results are also included

Simulation and analysis of adaptive routing and flow control in wide area communication networks

This thesis presents the development of new simulation and analytic models for the performance analysis of wide area communication networks. The models are used to analyse adaptive routing and flow control in fully connected circuit switched and sparsely connected packet switched networks. In particular the performance of routing algorithms derived from the L(_R-I) linear learning automata model are assessed for both types of network. A novel architecture using the INMOS Transputer is constructed for simulation of both circuit and packet switched networks in a loosely coupled multi- microprocessor environment. The network topology is mapped onto an identically configured array of processing centres to overcome the processing bottleneck of conventional Von Neumann architecture machines. Previous analytic work in circuit switched work is extended to include both asymmetrical networks and adaptive routing policies. In the analysis of packet switched networks analytic models of adaptive routing and flow control are integrated to produce a powerful, integrated environment for performance analysis The work concludes that routing algorithms based on linear learning automata have significant potential in both fully connected circuit switched networks and sparsely connected packet switched networks

Effective interprocess communication (IPC) in a real-time transputer network

The thesis describes the design and implementation of an interprocess communication (IPC) mechanism within a real-time distributed operating system kernel (RT-DOS) which is designed for a transputer-based network. The requirements of real-time operating systems are examined and existing design and implementation strategies are described. Particular attention is paid to one of the object-oriented techniques although it is concluded that these techniques are not feasible for the chosen implementation platform. Studies of a number of existing operating systems are reported. The choices for various aspects of operating system design and their influence on the IPC mechanism to be used are elucidated. The actual design choices are related to the real-time requirements and the implementation that has been adopted is described. [Continues.

The treatment of time in distributed simulation

Simulation is one of the most important tools to analyse, design, and operate complex processes and systems. Simulation allows us to make a 'trial and error' in order to understand a system and describe a problem. Therefore, it is of great interest to use simulation easily and practically. The advent of parallel processors and languages help simulation studies. A recent simulation trend is distributed simulation which may be called discrete- event simulation, because distributed simulation has a great potential for the speed-up. This thesis will survey discrete-event simulation and examine one particular algorithm. It will first survey simulation in general and secondly, distributed simulation. Distributed simulation has broadly two mechanisms: conservative and optimistic. The treatment of time in these mechanisms is different, we will look into both mechanisms. Finally, we will examine the conservative mechanism on a network of transputers using Occam. We will conclude with the result of the experiments and the perspective of distributed simulation

CSP channels for CAN-bus connected embedded control systems

Closed loop control system typically contains multitude of sensors and actuators operated simultaneously. So they are parallel and distributed in its essence. But when mapping this parallelism to software, lot of obstacles concerning multithreading communication and synchronization issues arise. To overcome this problem, the CT kernel/library based on CSP algebra has been developed. This project (TES.5410) is about developing communication extension to the CT library to make it applicable in distributed systems. Since the library is tailored for control systems, properties and requirements of control systems are taken into special consideration. Applicability of existing middleware solutions is examined. A comparison of applicable fieldbus protocols is done in order to determine most suitable ones and CAN fieldbus is chosen to be first fieldbus used. Brief overview of CSP and existing CSP based libraries is given. Middleware architecture is proposed along with few novel ideas

Robot control in a message passing environment: theoretical questions and preliminary experiments

The performance of real-time distributed control systems is shown to depend critically on both communication and computation costs. A taxonomy for distributed system performance measurement is introduced. A roughly accurate method of performance prediction for simple systems is presented. Experimental results demonstrate the effects of communication protocols on real-world system performance